Gluedown Installation Guidelines
Mechanically remove all paint back to the original base, prime and apply a compatible smoothing compound to a minimum of 1/8” (3 mm). 2. Wood Subfloors Standard Floorboards/Tongue and Groove Floorboards should be well secured, loose boards firmly fastened, and worn/broken boards replaced. Install a
Download Gluedown Installation Guidelines
Information
Domain:
Source:
Link to this page:
Related documents
RetroPlus Roof Board - Johns Manville
www.jm.comMechanically Fastened Urethane Adhesive Hot Asphalt Cold Applied Refer to the Application Guides and Detail Drawings for instructions. Packaging and Dimensions Sizes 4' x 4' (1.22 m x 1.22 m) 4' x 8' (1.22 m x 2.44 m) Thickness, nom ½" (1.27 cm) Board Weight, nom 9.9 lb (4.54 kg) 19.8 lb (9.07 kg) Coverage/Pallet 15.4 squares (143 m 2) 30.8 ...
DuPont Tyvek Mechanically-Fastened Water-Resistive and …
www.dupont.comMechanically-Fastened Water-Resistive and Air Barriers (Tyvek® WRBs) Product Dimensions Area DuPont™ Tyvek ® CommercialWrap® 5 ft x 200 ft 10 ft x 125 ft 1,000 sq ft 1,250 sq ft DuPont™ Tyvek ® CommercialWrap® D 5 ft x 200 ft 10 ft x 125 ft 1,000 sq ft 1,250 sq ft Self-Adhered Flashing Products Product Width
Firestone Polyiso Insulation
www.firestonebpco.comcan be attached with hot asphalt or low rise foam adhesive to various substrates, or mechanically fastened with Firestone fasteners and plates. PhysiCal PRoPERtiEs PRoPERty tEst MEthoD tyPiCal valuE density ASTM D 1622 2 pcf compressive strength* ASTM D 1621 20 psi dimensional stability ASTM D 2126 2% Max Moisture Vapor t ransmission ASTM E 96 ...
Pipe And Valve Identification
d37iyw84027v1q.cloudfront.netA mechanically applied, surface printed vinyl pipe marker. Snap-ons are used for pipes less than 6” outside diameter. Strap-ons are designed for pipes from 6” and greater Self-Sticking Pipe Markers Mechanically Applied Pipe Markers HARSH ENVIRONMENT General Purpose Mechanically Applied Mechanically Applied Self-Sticking Characteristic B-689
ROOFING SYSTEM APPROVAL - Miami-Dade County
www.miamidade.govSystem Type E(2): Anchor sheet mechanically fastened to deck, membrane adhered Anchor/Base Sheet: One or more plies of ASTM D 226 Type II or ASTM D 2626. Fastening: Per FBC 1518.2 & 1518.4 Nails and tin caps 12" grid, 6" o.c. at a minimum 4" head lap. (for base sheet only) Membrane: Elastoflex S6 G, hot asphalt applied
DensDeck Roof Board - Johns Manville
www.jm.comMechanically Fastened Urethane Adhesive Hot Asphalt Cold Applied Refer to the Application Guides and Detail Drawings for instructions. Packaging and Dimensions Size 4' x 8' (1.22 m x 2.44 m) Thickness, nom ¼" (6.4 mm) ½" (12.7 mm) 5 ...
Metal Sales Product Catalog
www.metalsales.us.comCONCEALED FASTENED PANELS ... Pittsburgh double flat locking mechanically seamed side lap Concealed clip designed for thermal movement Accommodates 1/2" to 6" blanket insulation Applies over open framing or solid substrate Finishes: PVDF and Acrylic Coated Galvalume ...
CertainTeed Low-Slope Roof Systems FLINTLASTIC® SA
www.certainteed.comsheet (mechanically fastened); PlyBase or MidPly may be used as a base ply (fully adhered, watertight). NOTE: PlyBase or MidPly may also be used as interply layers in three-ply systems, see Application of Interply (Optional). Mechanically Attached Base Beginning at the low point of the roof, mechanically fasten Flintlastic SA NailBase