Interzone 954 - AkzoNobel

Interline 984 - AkzoNobel

A two component, solvent free chemically resistant heavy duty epoxy phenolic tank lining. DESCRIPTION PRODUCT Interline 984 is intended as a lining for the protection of ferrous and non-ferrous substrates (including concrete).

  Interline, Interline 984

Chartek 1709 - AkzoNobel

Nov 20, 2017 · Airless Spray Airless Spray Thinner Cleaner Work Stoppages Clean Up Trowel Suitable Typically thinned by up to 5% solvent 15°C (59°F) 25°C (77°F) The above figures are for trowel application. Working pot life is not applicable for plural airless spray application as the product is only mixed at the spray gun, at the point of application.

  Spray

ISO12944 - AkzoNobel

ISO12944 is the industry standard for corrosion protection of steel structures by protective paint systems. Originally released in 1998, the standard is put together by representatives from key countries and companies ... All offshore systems must continue to go through 4,200 hours of cycling testing, which equates to 25 weeks.

  Corrosion, Offshore

Chartek 7 - AkzoNobel

May 19, 2015 · Chartek 7 is a high performance epoxy intumescent fire protection coating system. DESCRIPTION The product is a high build, two pack material providing excellent durability and combined corrosion and fire protection. Tested and certified by Lloyd's Register (LR) and Det Norske Veritas (DNV) for structural and divisional fire protection. PRODUCT

  Coating, Intumescent, Chartek, Chartek 7

Epoxy Zinc-Rich

May 16, 2017 · A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20. PRODUCT DESCRIPTION As a high performance primer to give maximum protection as part of any anti-corrosive coating system for aggressive environments including those found on offshore structures, petrochemical

  Zinc, Rich, Zinc rich

Interzinc - AkzoNobel

Nov 23, 2016 · Inorganic Zinc-Rich Silicate Prior to overcoating, Interzinc 22 must be clean, dry and free from both soluble salts and excessive zinc corrosion products. Surface temperature must always be a minimum of 5°F (3°C) above dew point. When applying Interzinc 22 in confined spaces, ensure adequate ventilation.

  Zinc, Interzinc

Epoxy - AkzoNobel

Jun 27, 2017 · A two component epoxy anti-corrosive primer pigmented with zinc phosphate. PRODUCT DESCRIPTION For use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems for use in the offshore, petrochemical, chemical, pulp and paper and bridge industries.

  Phosphate, Zinc, Zinc phosphate

Rapid Recoat Epoxy - AkzoNobel

Sep 22, 2015 · A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. PRODUCT DESCRIPTION As a primer for steelwork intended for use in a wide range of aggressive environments, including

  Phosphate, Zinc, Zinc phosphate

Intercure 200HS - AkzoNobel

Sep 22, 2015 · This product is intended for use only by professional applicators in industrial situations in accordance with the advice given on this sheet, the Material Safety Data Sheet and the container(s), and should not be used without reference to the Material Safety Data Sheet (MSDS) which International Protective Coatings has provided to its customers.

  Product, Sheet, Data, Data sheet

Interthane 990 - AkzoNobel

Apr 27, 2015 · Warning: Contains isocyanate. Wear air-fed hood for spray application. SAFETY PRECAUTIONS PACK SIZE Unit Size Part A Part B Vol Pack Vol Pack For availability of other pack sizes, contact International Protective Coatings. 20 litre 17.14 litre 20 litre 2.86 litre 3.7 litre 5 US gal 4.29 US gal 5 US gal 0.71 US gal 1 US gal SHIPPING WEIGHT (TYPICAL)

  Safety, Isocyanate

NIGP Commodity Codes (18th Edition)

ABRASIVES: 005-05-00 Abrasive Equipment and Tools : 005-14-00 Abrasives, Coated: Cloth, Fiber, Sandpaper, etc. 005-14-02 ABRASIVE BRISTLE BRUSHES, DISC SHAPED

  Code, Blister, Commodity, Nigp, Nigp commodity codes

MasterSeal 550 - Master Builders Solutions

high-pressure water jetting grit blasting and grinding. Spalled concrete should be cut back to ... using a short, stiff bristle brush or roller. Trowel application can be undertaken as necessary. For heavy 6-10 mm depressions, honeycombs etc. use less gauging liquid and …

  Blister, Sealmaster, Blasting

Interzinc - AkzoNobel

Nov 23, 2016 · performance). If oxidation has occurred between blasting and application of Interzinc 22, the surface should be reblasted to the specified visual standard. Surface defects revealed by the blast cleaning process, should be ground, filled, or treated in the appropriate manner. A surface profile of 1.6-3.0 mils (40-75 microns) is recommended.

  Blasting, Interzinc

POLYAMIDE EPOXY COATING GLOSS/SEMI-GLOSS V400

Aug 03, 2018 · Benjamin Moore & Co., 101 Paragon Drive, Montvale, NJ 07645 Tel: 866-708-9180 Fax: 888-248-2143 www.benjaminmoore.com M72 …

Carboguard 893 - Carboline

Brush Use a medium bristle brush. Roller Use a short-nap synthetic roller cover with phenolic core. APPLICATION CONDITIONS Condition Material Surface Ambient Humidity Minimum 4°C (40°F) 4°C (40°F) 4°C (40°F) 0% Maximum 32°C (90°F) 57°C (135°F) 43°C (110°F) 90% This product simply requires the substrate temperature to be above the ...

  Blister, Carboguard, Carboguard 893

PRODUCT DATA SHEET: EPOXOLINE - SERIES 22

Series 22 exterior (sunlight) exposed for longer than maximum recoat requires scarification by abrasive blasting prior to topcoating. SURFACE PREPARATION ... Use high quality natural or synthetic bristle brushes. Roller: Recommended only for heavily-pitted steel substrates, applications over concrete or as part of the Series 215ML

  Product, Sheet, Data, Blister, Product data sheet, Blasting

PRODUCT DATA SHEET: ENDURA-SHIELD - SERIES 73

Brush blasting with fine abrasive is the preferred method of scarification. Recoat windows for other primers may apply. See those data sheets for ... Use high quality natural or synthetic bristle brushes. Note: Two or more coats may be required to obtain recommended film thicknesses. SURFACE TEMPERATURE Minimum 35°F (2°C) Maximum 120°F (49°C)

  Blister, Blasting

SikaTop Seal 107

oio SikaTop® Seal 107 Flexible, waterproofing and protective slurry mortar Description SikaTop® Seal 107 is a two-component, polymer-modified, cementitious waterproofing and protective slurry mortar for concrete. It is slightly flexible to tolerate fine cracks and suitable in both interior and exterior applications.