Smart Battery Data Specification

System Management Bus

system management bus (smbus) specification version 2.0 sbs implementers forum 2 this specification is provided “as is” with no warranties whatsoever, whether express, implied or statutory, including but not limited to any warranty of merchantability, noninfringement or fitness for any particular purpose, or any warranty otherwise arising out of any proposal, specification or sample.

  System, Management, System management bus, Smbus

Datasheet - STM32L072x8 STM32L072xB STM32L072xZ - Ultra ...

(low power) – Up to 6x SPI 16 Mbits/s – 3x I2C (2 with SMBus/PMBus) • 11x timers: 2x 16-bit with up to 4 channels, 2x 16-bit with up to 2 channels, 1x 16-bit ultra-low-power timer, 1x SysTick, 1x RTC, 2x 16-bit basic for DAC, and 2x watchdogs (independent/window) • CRC calculation unit, 96-bit unique ID • True RNG and firewall protection

  Smbus

PLDM Base Specification

to low-level platform inventory, monitoring, control, event, and data/parameters transfer functions. For example, temperature, voltage, or fan sensors can have a PLDM representation that can be used to monitor and control the platform using a set of PLDM messages. PLDM defines data representations and

MLX90614 family

Thanks to the low noise amplifier, high resolution 17-bit ADC and powerful DSP unit of MLX90302 high accuracy and resolution of the thermometer is achieved. The calculated object and ambient temperatures are available in RAM of MLX90302 with resolution of 0.01 ˚C. They are accessible by 2 wire serial SMBus

  Smbus

TMP102 Low-Power Digital Temperature Sensor With SMBus …

TMP102 Low-Power Digital Temperature Sensor With SMBus and Two-Wire Serial Interface in SOT563 1 1 Features 1• SOT563 Package (1.6-mm × 1.6-mm) is a 68% Smaller Footprint than SOT-23 • Accuracy Without Calibration: – 2.0°C (max) from –25°C to 85°C – 3.0°C (max) from –40°C to 125°C • Low Quiescent Current: – 10-μA Active ...

  Smbus

Single-Chip HID USB to SMBus Master Bridge CP2112 Data …

The CP2112 SMBus interface includes the SDA and SCL signals needed for SMBus communication and is configurable. The configura-ble options include the clock speed, read/write timeouts, retry counter timeout, SCL low timeouts, and a 7-bit device address. The

  Smbus

SMBus Quick Start Guide - NXP

The current SMBus specifi cation is version 2.0. The earlier vers ion SMBus 1.0 and 1.1 specification was designed primarily with Smar t Batteries in mind, though it could be used for other low-power devices. The main difference between the earlier and current versions of the specification is that SMBus 2.0 defines

  Guide, Quick, Start, Smbus, Smbus quick start guide

PCAL6524 - Ultra low-voltage translating 24-bit Fm+ I2C ...

Ultra low-voltage translating 24-bit Fm+ I2C-bus/SMBus I/O expander The power-on reset puts the registers in their default state and initializes the I2C-bus/SMBus state machine. The RESET pin causes the same reset/initialization to occur without depowering the part. The system master can also accomplish a reset via an

  Smbus

System Management Bus(SMBus)Specification

Mar 19, 2018 · In no event will any specification co-owner be liable to any other party for any loss of profits, loss of use, incidental, consequential, indirect or special damages arising out of this

  System, Management, Specification, System management bus, Smbus

PCA9535E - I/O Expander for I 2 C Bus with Interrupt, Low ...

with Interrupt, Low-Power, 16-bit PCA9535E, PCA9535EC The PCA9535E and PCA9535EC devices provide 16 bits of General Purpose parallel Input / Output (GPIO) expansion through the I2C−bus / SMBus. The PCA9535E and PCA9535EC consist of two 8−bit Configuration (Input or Output selection); Input, Output and Polarity

  Smbus