UMG 604-PRO - Janitza
Switching frequency max. 20 Hz Cable length up to 30 m unshielded, from 30 m shielded Digital inputs Maximum counter frequency (Pulse input S0) 20 Hz Switching input Input signal present 18 V to 28 V DC (typical 4 mA) Input signal not present 0 to 5 V DC, current less than 0.5 mA Response time (Jasic program) 200 ms
Download UMG 604-PRO - Janitza
Information
Domain:
Source:
Link to this page:
Related documents
MASTER CATALOG Switches - Mouser Electronics
www.mouser.comsecond or return contact transfer takes place. At this point the contacts snap back to their original position. Measured from the reference line to the top of the button or actuator. Reset Travel The distance the switch button (or actuator) travels back from reset point to rest position. Switch Characteristics Miniature Subminiature Rest ...
Model 2000 6½-Digit Multimeter - Tektronix
download.tek.comA T ektr onix Company Datasheet Model 2000 6.5 Digit Multimeter DC OPERATING CHARACTERISTICS 2 Function Digits Readings/s PLCs 8 DCV (all ranges), 6½ 3, 4 5 10 DCI (all ranges), and 6½ 3, 7 30 1 Ohms (<10M range) 6½ 3, 5 50 1 5½ 3, 5 270 0.1 5½ 5 500 0.1 5½ 5 1000 0.04 4½ 5 2000 0.01 DC SYSTEM SPEEDS 2, 6 RANGE CHANGE 3: 50/s. …
Design Guide for Off-line Fixed Frequency DCM Flyback ...
www.mouser.comswitching MOSFET Q1, secondary rectifier D1, output capacitor C1 and the PWM controller IC. ... its transfer function is changed to a two pole system with low output impedance; thus, additional design rules have to be taken into account including different loop and ... Given these characteristics of DCM mode, it is the preferred choice for a ...
SIRCO M - Socomec
www.socomec.com• The SIRCO M changeover switch is available in 3 and 4 pole, from 25 to 125 A, with pre-break or signalisation auxiliary contacts (accessories). SIRCO M Manually operated Transfer Switching Equipment from 25 to 125 A Function Advantages SIRCO M are manually operated 3 or 4 pole modular transfer switches with positive break indication.
Understanding and Applying Current-Mode Control Theory
www.ti.comFor the closed current-loop control-to-output transfer function, the factored form shows a complex-conjugate pole at half the switching frequency. The sampling gain works in conjunction with the inductor pole, setting the Q of the circuit. Using a value of Q = 2 / π = 0.637 will cause
IEC WL Circuit Breakers - Siemens
assets.new.siemens.com23 4-pole, fixed-mounted versions 30 4-pole, withdrawable versions 37 Options 44 Accessories and spare parts 3WL non-automatic air circuit breakers up to 4000 A (DC) 66 3- and 4-pole, fixed-mounted versions 67 3- and 4-pole, withdrawable versions 69 Accessories and spare parts Ch. 12 3KC ATC5300 transfer control devices Siemens 3WL IEC Breakers ...