Transcription of 1492-AIFM6S-3 1492-AIFM8-3 1492-RAIFM6S-3 1492 …
1 Publication 1492-TD008C-EN-P - September 2005 152 Digital/Analog Programmable Controller Wiring Systems1492-AIFM6S-31492-RAIFM6S-3 Feed-Through 6-Channel Isolated with Terminals/ChannelApplication Notes1. Compatibility To ensure proper operation with the I/O module, do not exceed the voltage and current ratings of the Wiring Refer to the Label Section on page 174. For Field-Side Wiring Diagrams, refer to the Wiring System web site information on page Shield Terminals Six field-side terminals are jumpered together on the AIFM and internally connected to the D-shell Dimensions Refer to page 8-Channel Differential 16-Channel Single-Ended with 3 Terminals/ChannelApplication Notes1. Compatibility To ensure proper operation with the I/O module, do not exceed the voltage and current ratings of the Wiring Refer to the Label Section on page 174. For Field-Side Wiring Diagrams, refer to the Wiring System web site information on page Extra Terminals Eight field-side terminals are jumpered together on the AIFM.
2 For some I/O modules, the terminals are also internally connected to module common through the pre-wired cable. Refer to the AIFM and ACABLE Shield Terminals Eight field-side terminals are jumpered together on the AIFM and internally connected to the D-shell Dimensions Refer to page HousingA11B12A2A4A6A8A10A126181741615214 For updated page numbers refer to:Publication 1492-TD008C-EN-P - September 2005 Digital/Analog Programmable Controller Wiring Systems153 Pinout1492-AIFM6TC-3 Thermocouple 6-Channel with 3 Terminals/ChannelApplication Notes1. Compatibility To ensure proper operation with the I/O module, do not exceed the voltage and current ratings of the Wiring Refer to the Label Section on page 174. For Field-Side Wiring Diagrams, refer to the Wiring System web site information on page Shield Terminals Six field-side terminals are jumpered together on the AIFM and internally connected to the D-shell Cold Junction Compensation This AIFM contains on-board cold junction compensation (CTC) through a thermistor (T) and isothermal bar mounted to the field-side terminals.
3 Do not install the cold junction sensor (provided with the Catalog Number 1756-IT6I or 1756-IT6I2 thermocouple input module) on the removable terminal block of the pre-wired cable. This module is NOT compatible with other PLC systems ( bulletin numbers 1746, 1771, etc.) that do not have external CJC Dimensions Refer to page HousingA9A10A11A12A13A14A15A162524232220 21A1A2A3A4A5A6A7A84681019B113B2B3B4B5B6B 7B8B9B10B11B12A7A1A3A5252423222119181716 D-Shell Housing15146201211A2A4A6A8A10A12A9A11942 TFor updated page numbers refer to.
