Scottsdale® Legacy (CRUS)

1 LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 (513) 372-3200 LSI Industries Inc. All Rights Reserved. Specifi cations and dimensions subject to industry standard tolerances. Specifi cations subject to change without questions? Call us at (800) 436-7800 Type : Project : Catalog # : Date : Prepared By : Page 1/5 Rev. 01/05/23 Scottsdale Legacy (CRUS) LED Canopy LuminaireConstruction Features a ultra-slim 11/16 profile die-cast housing, with flat clear or diffused tempered glass lens. Unit is water-resistant, sealed and IP66 rated. Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture.

2 Standard color is white and is finished with LSI s DuraGrip polyester powder coat process. DuraGrip withstands extreme weather changes without cracking or peeling. Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and System Features an array of select, mid-power, high brightness, high efficiency LED; 3000K, 4000K, 5000K color temperature, 80 CRI (nominal). Choice of Symmetric or Asymmetric distribution. Asymmetric provides a wider distribution pattern. Optional symmetric with diffused lens also available. Forward Throw distribution provides an industry leading unique distribution pattern that illuminates the area under the gas canopy and beyond.

3 The forward through optic directs the light to the forecourt from the gas canopy eliminating the need for supplemental floodlights and extensive perimeter lighting. Diffuse lens available as an option to soften brightness of the luminaire. Six Lumen Packages: 5,000, 9,000, 10,000, 13,000, 18,000 and 22,000 Lumens. Electrical High performance factory programmable driver features over-voltage, under voltage, short-circuit and over temperature protection with integral 6kV surge protection that meets IEEE and ANSI Location Category C Low standards. Additional field replaceable 10kV surge protection device meets a minimum Category C Low operation (per ANSI/IEEE ).

4 Custom lumen and wattage packages available. Driver components are fully encased in potting for moisture resistance. Complies with IEC and FCC standards. 0-10 V dimming supplied standard with all drive currents. Die-cast aluminum, wet location rated driver/electrical enclosure is elevated above canopy deck to prevent water entry, provide easy knock-out connection of primary wiring and acts as the primary heatsink ensuring cool operation of internal components for longer life. Seals to optical housing via one-piece molded silicone gasket. Universal voltage power supply, 120-277 VAC, 50/60 HZ and 347-480 VAC, 50/60 HZ input.

5 -40 C to 55 C (-40 F to 131 F) ambient operating temperature. (Varies based on lumen package and mounting style see performance data for specifics.) Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location (see performance data for specifics.) Hazardous Location Designed for lighter than air fuel applications. product is suitable for Class 1 Divisions 2 only when properly installed per LSI installation instructions. See for specific guidance. Not available on One-person installation. Installs in a 12 or 16 deck pan.

6 Deck penetration consists of a 4 hole, simplifying installation and water sealing. Unit is designed to quickly retrofit into existing Scottsdale (4 ) hole as well as openings for Encore and Encore Top Access and to reconnect wiring for the SC/ECTA without having to relocate the conduit. Retro panels are available for existing Encores as well as kits for recessed and 2x2 installations (see separate spec sheets). Support brackets are provided standard, to prevent sagging of LSI luminaires carry a 5-year limited warranty. Refer to for more UL and ETL listed to UL 1598, UL 8750 and other and International safety standards.

7 Suitable for wet locations. DesignLights Consortium (DLC) Premium qualified product . Not all versions of this product may be DLC Premium qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. Meets Buy American Act requirements. IDA compliant with 3000K or lower color Package (lm)5,000 - 22,000 Wattage Range (W)38 - 152 Efficacy Range (LPW)114 -156 Weight lbs (kg)23 ( )QUICK LINKSFEATURES & Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 (513) 372-3200 LSI Industries Inc. All Rights Reserved. Specifi cations and dimensions subject to industry standard tolerances.

8 Specifi cations subject to change without questions? Call us at ( ) - Scottsdale Legacy (CRUS) LED Canopy LuminaireType : Page 2/5 Rev. 01/05 AC distribution utilizes a reflector which alters the look from a standard SC FT distribution option only available with VHO 22,000 lumen Custom lumen and wattage packages available consult factory Values are within industry standard tolerances but not DLC Not available with Not available on GUIDEACCESSORY ORDERING INFORMATION (Accessories are field installed)Order NumberDescription525946 Retrofit Panels - EC / ECTA / SCF to CRUS, for 16 Deck Panel 530281 Retrofit Panels - ECTA / SCF to CRUS, for 12 Deck Panel357282 Retrofit 2x2 Cover Panel Blank (no holes) Order NumberDescription354702 Retrofit RIC Cover Panel Blank (no holes)1320540 Kit - Hole Plugs and Silicone (enough for 25 retrofits)**Consists of (25) 7/8 hole plugs, (100) 5/16 hole plugs and (1) tube of RTVTYPICAL ORDER EXAMPLE.

9 CRUS SCFT LED VHO 50 UE WHT DFLP refixDistributionLight SourceDriver Color Temperature Input VoltageFinishOptions4 CRUS - LED Canopy LuminaireSC - SymmetricAC1 - AsymmetricSCFT2 - Combination Standard Symmetric and Forward ThrowLED SLW - 5,000 LumensVLW - 9,000 LumensLW - 11,000 LumensSS - 13,000 LumensHO - 19,000 LumensVHO - 22,000 Lumens2 Custom Lumen Packages3 VHO - 22,000 Lumens30 - 3000K40 - 4000K50 - 5000 KUE - Universal Voltage (120 - 277V)HV - High Voltage (347 - 480V)WHT - WhiteBRZ - BronzeBLK - BlackHL5 - Hazardous LocationDFL - Diffuse LensNeed more information?

10 Click here for our glossary Have additional questions?Call us at (800) 436-7800 LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 (513) 372-3200 LSI Industries Inc. All Rights Reserved. Specifi cations and dimensions subject to industry standard tolerances. Specifi cations subject to change without questions? Call us at ( ) - Scottsdale Legacy (CRUS) LED Canopy LuminairePage 3/5 Rev. 01/05 : PERFORMANCER ecommended Lumen Maintenance1 CRUS VHOA mbient Temperature CInitial225k hr250k hr275k hr3100k hr30 C102%97%92%88%84%10 C102%97%92%88%84%20 C102%97%92%88%84%25 C102%97%92%88%84%30 C102%97%92%88%84%40 C101%95%90%85%80%50 C101%94%89%83%78%OPERATING TEMPERATUREL umen PackageMountingMaxVHOM etal/Wood Canopy45 CHOM etal/Wood Canopy45 CSSM etal/Wood Canopy55 CRecommended Lumen Maintenance1 CRUS SSAmbient Temperature CInitial225k hr250k hr275k hr3100k