ALLGEMEINE-BAU-CHEMIE PHIL. INC.

1 ALLGEMEINE-BAU-CHEMIE phil . : (+63 2) 842-6891 Fax: (+63 2) : Website: TILE adhesive is a cement-based adhesivedesigned for bonding polished and unpolished homogenousand ceramic wall and floor tiles, as well as marble, graniteand natural stone on concrete surfaces. Only the highestquality portland cement, natural sand fillers and chemicaladditives are used. ABC TILE adhesive uses the thinbedmethod for a faster, professional and lasting tile tile cracks and bonding failure-High adhesive tensile strength-Non-sag properties and high initial adhesiveness-Greater workability due to long pot life and open time-For interior and exterior application-Higher productivity per worker per day-EconomicalSURFACE PREPARATIONThe substrate must be fully cured, structurally stable andlevel, smooth, clean and free from dirt, effloresence, dust,loose material, oil, chemicals and other contaminants.

2 Acidetch or abrade surface to ensure proper INSTRUCTIONSM ixing: Into a plastic or metal pail containing cleantap water, pour a sufficient amount of ABC TILEADHESIVE that can be used within the POT LIFE of4 hours. Pot life is the time during which the mixedtile adhesive can be applied while sitting in a non-absorptive container. CAUTION: Use only plasticpail or galvanized iron sheet as mixing base. Neveruse absorbent material such as plywood, woodenbox, gypsum board or card board as it will changethe consistency of the mix. 25 kg of ABC TILEADHESIVE needs approximately 8L of water. Stir witha mixing device or by hand. Let mixture rest for 15 minutes and restir just before applying.

3 NOTE: During hot and windy conditions, wet substratelightly before applying tile : Spread ABC Tile adhesive mortar evenlyover 1 m2 area at a time using a notched Applications: For tile installations over non-concrete surfaces, such as existing ceramic tiles,gypsum boards, fiber cement boards, granolithic floors,marble, granite or wood, use ABC TILE adhesive incombination with ABC Redifix or ABC TILE : Fix tiles immediately within the Open Timeof 20 minutes. Carry out random checks to determinewhether the back of the tile is fully covered with Time:Open time is the period when the mortar s adhesive strengthis most effective.

4 Adjust and align accordingly within theadhesive s open time only (picture 1).Finger Check:To ensure thatopen time has notlapsed, check if thetile adhesive mortarstill adheres toyour finger in orderto avoid bondingfailure (picture 2).If open time haslapsed, removethe appliedadhesive layer andthrow : DO NOT add a newly prepared batch ofABC Tile Adhesiveto a previously mixed batch. Cleaning:If excess mortar adheres on the tile face, remove withclean & PACKAGINGD epending on substrate conditions, tile size and applicationthickness, 25 kg of ABC TILE adhesive will cover (using 30 x 30cm tile). Available in 5kg and & SAFETYR emove excess mortar on tools using clean toxic.

5 However, as with any cementitious material,avoid prolonged skin & SHELF LIFES tore in a cool dry place. When stored as directed, ABCTILE adhesive will remain usable for a period of oneyear from date of to the variety of applications, the differing methods of working, thevarious properties of bases, etc., we cannot assume responsibility orliability with regard to the application of our products. Our guarantee andliability are restricted to the quality of our products at the time of acceptanceof the customer of such products. In no case shall our liability extendbeyond replacement of defective products, if any, found at the time ofacceptance.

6 For all deliveries and services, our General Sales Condition,including warranties stipulated for each case are