V-4-1211 1211 Part 3 68-94 8x10.5 - Spears Mfg Co …

1 68 butterfly VALVESS ample Engineering SpecificationAll thermoplastic valves shall be butterfly type constructed from PVC Type I Cell Classification 12454 or CPVC Type IV Cell Classification 23447. All valve seats and O-rings shall be Buna-N, EPDM or FKM. Seat shall be a non-liner type interlocked to valve body. Bolt hole patterns shall conform to ANSI/ASME Class 150. Disc shall be offset design with fully isolated Type 316L stainless steel stem and Type 316 stainless steel hardware. Lever operated valves shall be equipped with high impact polypropylene handle having built-in lockout capability. Gear operated valves shall be equipped with position indicator and high impact polypropylene handwheel. Valve bodies shall accept field installable lug inserts or shall be factory installed lug inserts, or be True Lug type. Lugs shall be stainless steel or zinc plated steel. valves shall be pressure rated at 150 psi for water at 73 F through 12", as manufactured by Spears Manufacturing - PVC, CPVCS pears patented butterfly Valve design departs from traditional liner-seat type valve to eliminate seat creep, reduce operating torque and provide positive seal-off.

2 Ideally suited for flow control or throttling, this high-performance valve is offered with a full variety of options for greater application versatility in industrial and chemical processing applications. Available in IPS sizes 1-1/2" - 14" in Standard or 1-1/2" - 12" True Lug (factory installed lugs) style. Special off-set Disc lifts quickly from seat to reduce wear and reduce operating torque. Patented Limited Contact Seat design provides free travel - eliminates seat creep, extrusion and wear. Field replaceable without full valve disassembly. Interlocking Body & Seat prevents wash-out or blow-out. Buna-N, EPDM or FKM Seat & Seals Fully Isolated Solid Type 316L Stainless Steel Stem Reversible High Impact Polypropylene Lever Handle with 7-Position stops & Built-in Lockout (standard handle on1-1/2" - 8" valves ; not available on 10" & larger valves ) High Efficiency Gear Operator with Cast Aluminum Housing, Polypropylene Handwheel, and Built-in Position Indicator (available for all sizes; standard on 10" & larger valves ) Lug Insert Style valve has factory installed SS316 or zinc plated steel lug inserts.

3 Standard valve accepts field-installable Lug Inserts Set option True Lug design has factory installed zinc plated or SS 316 lugs and is specially designed for connection to either side of valve. Pressure Rated to 150 psi @ 73 F including Dead-End Service. ANSI/ASME Class 150 Bolt Pattern valves with EPDM Seals & Seats are NSF Certified for Potable water use. Optional Accessories PTFE Coated Stem Stem Extension Kit PTFE Seat Sleeve Lever Handle Kit (standard on 1-1/2" - 8" valves ) Gear Operator Kit (standard on 10" & larger valves ) T-Handle Kit Field Installable Lug Insert Sets (for Standard valve) Speed Handle (for gear operated valves ) 2" Square/T-Style Operator Nut (for gear operated valves ) Chainwheel Operator Kit (for gear operated valves ) Positive Stem Stop (for gear operated valves ) Submersible Gear Operators * See butterfly VALVE ACCESSORIES section for details of individual & True Lug DesignGear OperatingLever HandleTrue LugLug Insert Style14" StandardPVC & CPVCB utterfly Valves69 butterfly VALVESNOT FOR DISTRIBUTION OF COMPRESSED AIR OR GASESSee dimensions and additional Technical Information on following pagesStandard & Lug Insert Style Quick-View Valve Selection ChartValveSizeO-ringMaterialSTANDARD VALVE DESIGNLUG INSERT VALVE DESIGNP ressureRatingPVC Part Number1 PVC Part Number1 Installedwith 316 Stainless Steel Lug Inserts2,3.

4 4w/LeverHandlew/GearOperatorValveOnlyw/L everHandlew/GearOperatorValveOnly1-1/2 Buna-N721311-015721321-015721301-0157213 11G-015721321G-015721301G-015150 psiNon-ShockWater@ 73 FEPDM722311-015722321-015722301-01572231 1G-015722321G-015722301G-015 FKM723311-015723321-015723301-015723311G -015723321G-015723301G-0152 Buna-N721311-020721321-020721301-0207213 11G-020721321G-020721301G-020 EPDM722311-020722321-020722301-020722311 G-020722321G-020722301G-020 FKM723311-020723321-020723301-020723311G -020723321G-020723301G-0202-1/2 Buna-N721311-025721321-025721301-0257213 11G-025721321G-025721301G-025 EPDM722311-025722321-025722301-025722311 G-025722321G-025722301G-025 FKM723311-025723321-025723301-025723311G -025723321G-025723301G-0253 Buna-N721311-030721321-030721301-0307213 11G-030721321G-030721301G-030 EPDM722311-030722321-030722301-030722311 G-030722321G-030722301G-030 FKM723311-030723321-030723301-030723311G -030723321G-030723301G-0304 Buna-N721311-040721321-040721301-0407213 11G-040721321G-040721301G-040 EPDM722311-040722321-040722301-040722311 G-040722321G-040722301G-040 FKM723311-040723321-040723301-040723311G -040723321G-040723301G-0406 Buna-N721311-060721321-060721301-0607213 11G-060721321G-060721301G-060 EPDM722311-060722321-060722301-060722311 G-060722321G-060722301G-060 FKM723311-060723321-060723301-060723311G -060723321G-060723301G-0608 Buna-N721311-080721321-080721301-0807213 11G-080721321G-080721301G-080 EPDM722311-080722321-080722301-080722311 G-080722321G-080722301G-080 FKM723311-080723321-080723301-080723311G -080723321G-080723301G-08010 Buna-N10" ANDLARGER NOTAVAILABLEWITH LEVERHANDLE721321-100721301-10010" ANDLARGER NOTAVAILABLEWITH LEVERHANDLE721321G-100721301G-100 EPDM722321-100722301-100722321G-10072230 1G-100 FKM723321-100723301-100723321G-100723301 G-10012 Buna-N721321-120721301-120721321G-120721 301G-120 EPDM722321-120722301-120722321G-12072230 1G-120

5 FKM723321-120723301-120723321G-120723301 G-12014 EPDM722321-140722301-140----100 psi@ 73 FFKM723321-140723301-140----Temperature Pressure RatingSystem Operating Temperature F ( C)100(38)110(43)120(49)130(54)140(60)150 (66)160(71)170(77)180(82)190(88)200(93)2 10(99)ValvePressure Rating psi(MPa)PVC150( )135(.93)110(.76)75(.52)50(.34)-0-(-0-)- 0-(-0-)-0-(-0-)-0-(-0-)-0-(-0-)-0-(-0-)- 0-(-0-)CPVC150( )140(.97)130(.90)120(.83)110(.76)100(.70 )90(.62)80(.55)70(.48)60(.41)50(.34)-0-( -0-)1: For CPVC valves , add the letter C to part numbers listed ( , 722311-030C).2: For factory installed Lug Insert Valve with Zinc Plated Lugs, substitute the letter G with the the letter K ( 721311K-030)3: For True Lug Design Valve with Stainless Steel Lugs, substitute the letter G with the letter L ( 721311L-030).4: For True Lug Design Valve with Zinc Plated Steel Lugs, substitute the letter G with the letter Z ( 721311Z-030).Note: Optional BFV with submersible gear operators available, inquire with Spears .

6 70 See dimensions and additional Technical Information on following pagesFeaturesSpears patented butterfly Valve design departs from traditional liner-seat type valve to eliminate seat creep, reduce operating torque and provide positive seal-off. Broad range of chemical resistance makes Polypropylene well suited for industrial and chemical processing applications. Designed for flow control or throttling, this high-performance valve is offered with a full variety of options for greater application versatility. Available in IPS sizes 1-1/2" - 24" with custom produced 30" to 60" valves available. UV Stabilized Polypropylene Construction Special off-set Disc lifts quickly from seat to reduce wear and reduce operating torque. Patented Limited Contact Seat design provides free travel - eliminates seat creep, extrusion and wear. Field replaceable without full valve disassembly. Interlocking Body & Seat prevents wash-out or blow-out.

7 Buna-N, EPDM or FKM Seat & Seals Solid Type 316L Stainless Steel Stem, fully isolated from process fluids Reversible High Impact Polypropylene Lever Handle with 7-Position stops & Built-in Lockout (standard handle on 1-1/2" - 8" valves ; not available on 10" & larger valves ) High Efficiency Gear Operator with Cast Aluminum Housing, Polypropylene Handwheel, and Built-in Position Indicator (available for all sizes; standard on 10" & larger valves ) Pressure ratings include Dead-End Service (See Chart). ANSI/ASME Class 150 Bolt PatternOptional Accessories PTFE Coated Stem Stem Extension Kit PTFE Seat Sleeve (through 12" size) Lever Handle Kit (standard on 1-1/2" - 8" valves ) Gear Operator Kit (standard on 10" & larger valves ) T-Handle Kit Speed Handle (for gear operated valves ) 2" Square/T-Style Operator Nut (for gear operated valves ) Chainwheel Operator Kit (for gear operated valves ) Positive Stem Stop (for gear operated valves ) Submersible Gear Operators * See butterfly VALVE ACCESSORIES section for details of individual Engineering SpecificationAll thermoplastic valves shall be butterfly type constructed from Polypropylene, ASTM D 4101.

8 All valve seats and O-rings shall be Buna-N, EPDM or FKM. Seat shall be a non-liner type interlocked to valve body. Bolt hole pattern shall conform to ANSI/ASME Class 150. Disc shall be offset design with fully isolated, Type 316L stainless steel stem and Type 316 stainless steel hardware. Lever operated valves shall be equipped with high impact polypropylene handle having built-in lockout capability. Gear operated valves shall be equipped with position indicator and high impact polypropylene handwheel. valves shall be pressure rated at [see table] for water at 73 F, as manufactured by Spears Manufacturing Note: UV Stabilized Polypropylene with beige pigment sizes 1-1/2" - 12" are glass reinforced, sizes 14" - 24" are not. butterfly VALVESP olypropylene71 butterfly VALVESP olypropylene Quick-View Valve Selection ChartTemperature Pressure RatingSystem OperatingTemperature F ( C)100(38)110(43)120(49)130(54)140(60)150 (66)160(71)170(77)180(82)190(88)ValvePre ssureRatingpsi(MPa)1-1/2"-12"150( )105(.)

9 72)90(.62)80(.55)65(.45)50(.34)45(.31)30 (.21)20(.14)-0-14"100(.69)70(.48)60(.41) 53(.37)43(.26)33(.23)30(.21)20(.14)13(.0 9)-0-16"85(.59)60(.41)51(.35)45(.31)37(. 26)28(.19)26(.18)17(.12)11(.08)-0-18"70( .48)49(.34)42(.29)37(.26)30(.21)23(.16)2 1(.14)14(.10)9(.06)-0-20"-24"50353027221 715107-0-(34)(.24)(.21)(.19)(.15)(.12)(. 10)(.07)(.05)ValveSizeO-ringMaterialw/Le verHandlew/GearOperatorValveOnlyPressure Rating1-1/2 Buna-N721311-015 PSpecial Order721301-015P150 psiNon-ShockWater@ 73 FEPDM722311-015 PSpecial Order722301-015 PFKM723311-015 PSpecial Order723301-015P2 Buna-N721311-020P721321-020P721301-020 PEPDM722311-020P722321-020P722301-020 PFKM723311-020P723321-020P723301-020P2-1 /2 Buna-N721311-025P721321-025P721301-025 PEPDM722311-025P722321-025P722301-025 PFKM723311-025P723321-025P723301-025P3 Buna-N721311-030P721321-030P721301-030 PEPDM722311-030P722321-030P722301-030 PFKM723311-030P723321-030P723301-030P4 Buna-N721311-040P721321-040P721301-040 PEPDM722311-040P722321-040P722301-040 PFKM723311-040P723321-040P723301-040P6 Buna-N721311-060P721321-060P721301-060 PEPDM722311-060P722321-060P722301-060 PFKM723311-060P723321-060P723301-060P8 Buna-N721311-080P721321-080P721301-080 PEPDM722311-080P722321-080P722301-080 PFKM723311-080P723321-080P723301-080P10 Buna-N10" andLarger

10 Notavailablewith LeverHandle721321-100P721301-100 PEPDM722321-100P722301-100 PFKM723321-100P723301-100P12 Buna-N721321-120P721301-120 PEPDM722321-120P722301-120 PFKM723321-120P723301-120P14 Buna-N 100 psi Non-Shock Water@ 73 FEPDM722321-140P722301-140 PFKM723321-140P723301-140P16 Buna-N 85 psi Non-Shock Water@ 73 FEPDM722321-160P722301-160 PFKM723321-160P723301-160P18 Buna-N 70 psi Non-Shock Water@ 73 FEPDM722321-180P722301-180 PFKM723321-180P723301-180P20 Buna-N 50 psi Non-Shock Water@ 73 FEPDM722321-200P722301-200 PFKM723321-200P723301-200P24 Buna-N EPDM722321-240P722301-240 PFKM723321-240P723301-240 PNote: 30" - 60" Polypropylene Butterfl y valves produced to order72 butterfly VALVESS ample Engineering SpecificationAll thermoplastic butterfly valves shall be constructed from CPVC Type IV Cell Classification 23447 with TFM liner and ECTFE disc. Disc and liner interface shall isolate valve components and elastomeric seals from process media.