NAV/COMM Test Set IFR 4000 - AvionTEq

1 EXPORT CONTROL WARNING: This document contains controlled technology or technical data under the jurisdiction of the Export Administration Regulations (EAR), 15 CFR 730-774. It cannot be transferred to any foreign third party without the specific prior approval of the Department of Commerce, Bureau of Industry and Security (BIS). Violations of these regulations are punishable by fine, imprisonment, or Test SetIFR 4000 Operation ManualIssue-2 Subject to Export Control, see Cover Page for details. OPERATION MANUAL NAV/COMM TEST SET IFR 4000 PUBLISHED BY Aeroflex COPYRIGHT Aeroflex 2010 All rights reserved.

2 No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior permission of the publisher. Reissued Jan 2010 Issue-2 Mar 2010 10200 West York / Wichita, Kansas 67215 / (316) 522-4981 / FAX (316) 524-2623 OPERATION MANUAL IFR 4000 Subject to Export Control, see Cover Page for details.

3 Electromagnetic Compatibility: For continued EMC compliance, all external cables must be shielded and three meters or less in length. Nomenclature Statement: In this manual IFR 4000 , 4000 , Test Set or Unit refers to the IFR 4000 NAV/COMM Test Set. OPERATION MANUAL IFR 4000 Subject to Export Control, see Cover Page for details. THIS PAGE INTENTIONALLY LEFT BLANK. OPERATION MANUAL IFR 4000 Subject to Export Control, see Cover Page for details. SAFETY FIRST: TO ALL operations PERSONNEL REFER ALL SERVICING OF UNIT TO QUALIFIED TECHNICAL PERSONNEL.

4 THIS UNIT CONTAINS NO OPERATOR SERVICEABLE PARTS. WARNING: USING THIS EQUIPMENT IN A MANNER NOT SPECIFIED BY THE ACCOMPANYING DOCUMENTATION MAY IMPAIR THE SAFETY PROTECTION PROVIDED BY THE EQUIPMENT. CASE, COVER OR PANEL REMOVAL Opening the Case Assembly exposes the operator to electrical hazards that can result in electrical shock or equipment damage. Do not operate this Test Set with the Case Assembly open. SAFETY IDENTIFICATION IN TECHNICAL MANUAL This manual uses the following terms to draw attention to possible safety hazards, that may exist when operating or servicing this equipment.

5 CAUTION: THIS TERM IDENTIFIES CONDITIONS OR ACTIVITIES THAT, IF IGNORED, CAN RESULT IN EQUIPMENT OR PROPERTY DAMAGE ( , FIRE). WARNING: THIS TERM IDENTIFIES CONDITIONS OR ACTIVITIES THAT, IF IGNORED, CAN RESULT IN PERSONAL INJURY OR DEATH. SAFETY SYMBOLS IN MANUALS AND ON UNITS CAUTION: Refer to accompanying documents. (This symbol refers to specific CAUTIONS represented on the unit and clarified in the text.) AC OR DC TERMINAL: Terminal that may supply or be supplied with AC or DC voltage. DC TERMINAL: Terminal that may supply or be supplied with DC voltage.

6 AC TERMINAL: Terminal that may supply or be supplied with AC or alternating voltage. EQUIPMENT GROUNDING PRECAUTION Improper grounding of equipment can result in electrical shock. USE OF PROBES Check the specifications for the maximum voltage, current and power ratings of any connector on the Test Set before connecting it with a probe from a terminal device. Be sure the terminal device performs within these specifications before using it for measurement, to prevent electrical shock or damage to the equipment. POWER CORDS Power cords must not be frayed, broken nor expose bare wiring when operating this equipment.

7 USE RECOMMENDED FUSES ONLY Use only fuses specifically recommended for the equipment at the specified current and voltage ratings. INTERNAL BATTERY This unit contains a Lithium Ion Battery, serviceable only by a qualified technician. CAUTION: SIGNAL GENERATORS CAN BE A SOURCE OF ELECTROMAGNETIC INTERFERENCE (EMI) TO COMMUNICATION RECEIVERS. SOME TRANSMITTED SIGNALS CAN CAUSE DISRUPTION AND INTERFERENCE TO COMMUNICATION SERVICES OUT TO A DISTANCE OF SEVERAL MILES. USERS OF THIS EQUIPMENT SHOULD SCRUTINIZE ANY OPERATION THAT RESULTS IN RADIATION OF A SIGNAL (DIRECTLY OR INDIRECTLY) AND SHOULD TAKE NECESSARY PRECAUTIONS TO AVOID POTENTIAL COMMUNICATION INTERFERENCE PROBLEMS.

8 OPERATION MANUAL IFR 4000 Subject to Export Control, see Cover Page for details. THIS PAGE INTENTIONALLY LEFT BLANK. OPERATION MANUAL IFR 4000 Subject to Export Control, see Cover Page for details. DECLARATION OF CONFORMITY The Declaration of Conformity Certificate included with the unit should remain with the unit. Aeroflex recommends the operator reproduce a copy of the Declaration of Conformity Certificate to be stored with the Operation Manual for future reference. OPERATION MANUAL IFR 4000 Subject to Export Control, see Cover Page for details.

9 THIS PAGE INTENTIONALLY LEFT BLANK. OPERATION MANUAL IFR 4000 TABLE OF CONTENTS Subject to Export Control, see Cover Page for details. Page 1 Mar 1/10 TABLE OF CONTENTS Title Chapter/Section Title / Copyright Page Statements Safety Page Declaration of Conformity Table of Contents Introduction Service Upon Receipt of Material Chapter 1 Section 1 - Description 1-1 Section 2 - Operation 1-2 Section 3 - Specifications 1-3 Section 4 - Shipping 1-4 Section 5 - Storage 1-5 Appendix A - Connector Pin-Out Tables Appendix B - Metric/British Imperial Conversion Table with Nautical Distance Conversions Appendix C - Factory Presets Appendix D.

10 Abbreviations Appendix E - Serial Interface Cable Appendix F - 406 Beacon Applications and Protocols Index Battery/Voltage Instructions OPERATION MANUAL IFR 4000 TABLE OF CONTENTS Subject to Export Control, see Cover Page for details. Page 2 Mar 1/10 THIS PAGE INTENTIONALLY LEFT BLANK. OPERATION MANUAL IFR 4000 INTRODUCTION Page 1 Mar 1/10 INTRODUCTION This manual contains operating instructions for the IFR 4000 . It is strongly recommended that personnel be thoroughly familiar with the contents of this manual before attempting to operate this equipment.