QUICK REFERENCE GUIDE

1 Mohawk Sign Systems, Inc. ~ A Sign of Quality Since 1946 ~ QUICK REFERENCE GUIDE SERIES SIZE DESCRIPTION 200A Sand Carved Any size from X 2 to 28 X 70 Made from hard phenolic plastic laminate & other materials described below. The laminate is sandblasted removing the background material and leaving the letters, symbols & Braille raised from the sign face. The raised characters remain an intrinsic, irremovable part of the sign. Meets ADA, ANSI, HEW OSHA & VA requirements. MATERIALS COLORS GRAPHIC PROCESS Melamine Plastic [M] 1/16 1/8 3/16 (white only) 1/4 (white or black only) Engraving Stock [E] 1/16 1/8 Fiberglass 1/8 1/4 Marble Slate Granite Hardwoods 51 Standard Background Colors 16 Standard Copy Colors [M] [E] **Custom color match available** Metallic & custom copy colors available for an additional charge Fiberglass available with black or white copy only Note.

2 ADA requires a 70% contrast between background and letter colors One-piece construction Tactile characters raised 1/32 inches from sign face, glued on letters are not acceptable All signs accompanied by Grade 2 Braille raised 1/32 inches from sign face, rounded Braille is also available Braille shall be separated 1/2 from corresponding raised characters or symbols Grade 2 Braille translation provided by manufacturer All letters, numbers and/or symbols shall contrast with their background the required 70% Characters must be upper case & sans serif or simple serif Characters to be a minimum height of 5/8 and a maximum of 2 Sign face to have a non-glare finish SIGN ADD-ONS ALSO AVAILABLE FRAMES Logos Radius Corners Borders Arrows Accent Lines Custom Reveals Arches Bull nosed edges Beveled edges Window plaques Window slots In/Out Sliders Lettered ES [E]

3 Or lexan inserts Marker board Corkboard Custom sign shapes Software & perforated paper for the production of paper inserts Painted blank backers for glass mount applications 1/8 Aluminum shim plates Accent Bars: Available in Polished Yellow Gold, Polished Rose Gold, Matte Black, Polished Silver and Satin Silver Natural Red Oak accent bars Note Holders: Available in Satin Aluminum & Bronze Desk mount frames Aluminum Flag & Ceiling mount brackets Aluminum Aluminum angle 1/16 thick by 1/2 deep 1/8 back plate, 3/32 reveal Available in virtually any size Available in: Clear Anodized Aluminum, Satin Gold, Black Anodized, Dark Bronze, Polished Gold, Polished Silver & Custom Painted (for an additional charge) Plastic Interior Only Available in.

4 Almond, Pearl Gray, Brown, Dark Bronze, Black, White & Custom Painted (for an additional charge) Limited sizes (please call for exact sizes available) Optional Frame & Lens Curved Series Available in Satin Aluminum or Black Accepts one-piece 1/16 ADA sign inserts MOUNTING LETTER HEIGHTS CAMERA-READY ARTWORK Vinyl Tape Mechanical Silastic Adhesive Presslock Magnetic Dimensional Also available: Countersunk holes Torx screws & drivers Painted screws to match sign background Mounted 60 from floor on latch side, 2 from door frame 1 Cap height letters can be read from 50 0 away 2 Cap height letters can be read from 100 0 away 4 Cap height letters can be read from 200 0 away 6 Cap height letters can be read from 300 0 away Good lighting conditions are presumed to exist in these cases.

5 If lighting is poor, reduce distances by approximately 50 percent. Note: ADA requires letter heights to be a min. of 5/8 and a max. of 2 For our use, files must be native EPS, AI, or DXF documents. If your native image includes text, please convert text to outlines so that we may provide an exact match. A PDF file should also be sent along with one of the above formats. Native EPS, AI, and DXF files are Created in pixel based programs such as Adobe Photoshop Files that contain pixels Files that include scanned images or text Pixel based files that have been converted to EPS, AI, or DXF formats (converting pixel based images to EPS, AI, or DXF does not provide usable vector information) Native files Original artwork created only in vector based programs such as Adobe Illustrator, Corel, or Auto Cad