Transcription of AkzoNobel 10P20-44 High Solids Epoxy Primer
1 10P20-44 High Solids Epoxy PrimerBase:10P20-443 partsCuring Solution:EC-265 orEC-2731 partAt 75 to 80 F & 50% RHDry to Topcoat:2 hoursDry to handle:8 12 hoursDry to tape:2 hoursFullCure:7 daysClean Up:UseMEKP rimercan betopcoatedin 2 to 2 hours at 77 F (25 C).(see Technical data sheet for details)One coat needed:Apply one full wet closed coat. Avoid runs and sags. The high solidscontent causes a rapid film film to mils (15 23 microns)At77 F (24 C):Mix Viscosity:13 19 secondsZahn-ISO #215 21 seconds ISO-Cup #4 Pot life:4 hours w/ Thinner1 Hour w/ No ThinnerInduction Time:None requiredThinner/Reducer:TR-114*orTR-102* *1 part(optional but recommended)Type equipmentTip SizeGun Air Air ,Sata, BinksMach 1 Low Pres.
2 MmPRO3500, 4500 SCAir Assisted .33 mmPRO4000AA*TR-114is a VOC exempt andHAPS free thinner**TR-102is a non-exempt thinnerthat raises the total VOCAkzoNobelAerospace CoatingsIssue date: September 2014-FOR PROFESSIONAL USE ONLYWe have taken reasonable care in preparing the Mixing Guide and in collecting and preparing material for inclusion in it butdonot represent or warrant that it is free from error or that the information content iscomplete or accurate. The information is advisory only and the use of the Material is solely at your own risk.
