Transcription of MaxiPass Maximum Free Passage Full Cone Whirl …
1 MaxiPass MaxiPass Flow Rates and DimensionsFull cone , Extra Narrow 30 (NN), Narrow 60 (N), Medium 90 (M) and Wide 120 (W) Spray Angles, 3/8 " to 4" Pipe SizesMale Dimensions (in.)FemaleGALLONS PER MINUTE @ PSIFreeOverall lengthWt.**PipeNozzleK35710152030406080 Passage30 60 90 120 (lbs.)SizeNumberFactorPSIPSIPSIPSIPSIPSI PSIPSIPSIPSIDia. (in.)AAAAB Metal3/8* * 1 1 Rate (GPM ) = K (PSI ) ** Weights given are for 60 , 90 , and 120 Standard Materials: Brass, 316 Stainless Steel, PVC, Polypropylene, and PTFE.
2 (PTFE not available in 3/8" and 1/2" sizes. Cobalt A6 not available in 3/8 .) 8/20/93f (MAX)- Maximum free PassageDESIGN FEATURES Ultimate clog-resistant design withlargest free Passage available in a fullcone nozzle Two unique S-shaped internal vanesallow free Passage of particles High energy efficiency Easily handles dirty, lumpy liquids Male and female connections Flanged connection available PatentSPRAY CHARACTERISTICS High reliability spray performanceunder the most difficult conditionsSpray pattern: full cone (Square patterns to special order)Spray angles.
3 30 , 60 , 90 , and 120 Flow rates: to 978 gpm(Flow rates up to 4500 gpm available;call BETE Applications Engineering fordetails.) full cone 30 (NN) full cone 60 (N) full cone 120 (W) full cone 90 (M)Wide Angle MetalThe spray angle of wide and medium angle Whirl nozzles is affected by increasing pressure. Contact BETE Applications Engineering when using the MaxiPass above 40 PSI. Dimensions are approximate. Check with BETE for critical dimension angle and pattern vary with pressure. Contact BETE for specific data on critical ORDER:specify pipe size, connection type, nozzlenumber, spray angle, and cone *3/8 and 1/2 sizes: 30 not available, 60 not available in plasticMaxiPass Flow Rates and DimensionsFull cone , Extra Narrow 30 (NN), Narrow 60 (N), Medium 90 (M) and Wide 120 (W) Spray Angles, 3/8" to 4" Pipe SizesApprox.
4 Dimensions (in.)Male PER MINUTE @ PSIFreeOverall LengthWt.**PipeNozzleK35710152030406080 Passage30 60 90 120 (lbs.)SizeNumberFactorPSIPSIPSIPSIPSIPSI PSIPSIPSIPSIDia. (in.)AAAAC* 1 Rate (GPM) = K (PSI ) * C dimension for 30 (NN) is larger ** Weights given are for 60 , 90 , and 120 Standard Materials: Brass, 316 Stainless Steel, PVC, Polypropylene, and PTFE. (MAX) spray angle of wide and medium angle Whirl nozzles is affected by increasing pressure.
5 Contact BETE Applications Engineering when using the MaxiPass above 40 are approximate. Check with BETE for critical dimension cutaway view ofthe MaxiPassnozzle showing theS-shaped vanesthat enable thenozzle tosuccessfully handlelarge particleswithout free PassageTraditional full ConeFree PassageA comparison of the free Passage available with the BETEMaxiPass nozzle compared to the free Passage of a traditionalfull cone nozzle. The BETE MaxiPass is designed to pass solidparticles that are 2-3 times larger in diameter than particles thatwill pass through a traditional full cone plastic dimensions, please call BETE Customer 413-772-0846 Call for the name of your nearest BETE angle and pattern vary with pressure.
6 Contact BETE for specific data on critical cone
