Dulux Professional DryErase Gloss NZ DD02419

1 NZ_DD02530 Dulux Professional DryErase White Coat GlossPart A56W-D0095 Part B56W-D0100 DescriptionDulux Professional DryErase is a two part water based polyurethane formula that turns an interior painted surface into an erasable canvas for odour, low VOC water based paintDurable polyurethane finishBenefitsTurn any painted surface into a creative spaceFast recoat and dry timeUsesDulux Professional DryErase White is designed to turn a painted surface into a creative space. With exceptional dry erase properties, this product is ideal foruse at home, at work and at school. Create a write-on surface of any size or shape by simply applying this product over a properly prepared GuideWeatherDesigned for interior use only. Not recommended for exterioruseWaterSuitable for use in wet resistance to alcohol (Iso Propyl alcohol ) andharsh cleaning agentsAlkaliExcellent resistance to alkaline cleaning chemicalsVersion of Dulux datasheet NZ_DD02530 approved on Wednesday, 20 March 2019 7:56:42 PM (UTC)Page 1 of 5 VIVID Volatile Organic Content (TVOC) values arecalculated in accordance to the stated methodology withinGreen Star Technical Manuals.

2 The TVOC content istheoretically calculated as the sum total of the known VOCvalues of the product s raw material components. Thesematerials include the base paint plus additional low VOCtinter required for non-factory packaged PropertiesGloss Level65-75 at 60 degreesThinnerWaterColourWhiteDulux ColourBaseComponents2 Number OfCoats2 ToxicityLead free. Dry film is Level< 2 g/LShelf Life12 months from date of manufacture (Part A & Part B).Meets GBCAVOCR equirement?Mixing RatioEnsure all of Part A is mixed with all of Part BPot Life2 hours at 25 C (650mL mixed volume)Touch Dry4 hour (at 25 C & 50% Relative Humidity). Paint will be touch dry but may feel UpClean UpDescriptionClean all equipment with waterApplicationMethodOther:This product is NOT to be (Personal Protective Equipment) should always be worn when using this includes safety glasses, impervious gloves and overalls as a By Volume44 MinMaxRecommendedWet Film Per Coat (microns)54 Dry Film Per Coat (microns)24 Recoat Time (min)30 Theoretical Spread Rate (m2/L)18 TypicalPropertiesNotesWhen full kit is applied to 5 SQM area, the dry film thickness will be approximately 50 micronsApplication GuideSurfacePreparationNEW SURFACEWipe with a clean dry cloth to remove any dust.

3 Apply one coat of Dulux Professional Total Prep , according to product set plaster apply Dulux Sealer Binder followed by Dulux Professional Total Professional DryErase White can be applied directly to a properly primed surface. Do not apply Dulux Professional DryErase directlyover an oil based SURFACEIf surface is in sound condition wipe with a clean dry cloth to remove any dust. No primer required except when applying DuluxProfessional DryErase White over dark colours. For best coverage over dark colours apply one coat of Dulux Professional Total Prepbefore applying Dulux Professional DryErase surfaces that require preparation: Repair any divots, scratches, or bumps on the wall by filling them. If the wall is textured, sand it smooth or, for heavy texture use a level 5 finish. Next apply one coat of Dulux Professional Total Prep, according to product Professional DryErase will only be as smooth as the surface you apply it COAT Dulux Professional DryErase White performs best over a semi- Gloss , or Gloss finish.

4 For the best performance of DuluxProfessional DryErase do not paint over a flat or matt not apply an oil based topcoat or of Dulux datasheet NZ_DD02530 approved on Wednesday, 20 March 2019 7:56:42 PM (UTC)Page 2 of 5 Apply all prepcoats and topcoats with a 5-8mm nap roller sleeve for the least amount of roller stipple. Allow all coatings to fully dry for 24hours prior to applying Dulux Professional Professional DryEraseWARNING: DO NOT SPRAY , Part B contains polyisocyanate, a chemical that is considered a respiratory and skin sensitizer, therefore thisproduct should NOT be spray applied and must only be applied in a well ventilated area. Read SDS carefully for proper by roller and : Open doors and windows to ensure good ventilationProtect: Follow all safety precautions outlined on the PART A and PART B further product or application advice or a Safety Data Sheet contact Dulux Customer Service AUST 13 23 77, NZ 0800 800 424 MIX DO NOT SHAKE CANS1 Pour contents of Part B into Part Stir thoroughly with broad flat stirrer (provided) for 1 Loosely place the lid back on the can and wait for 2 mins before mixed you have 2 hours to YOU HAVE 2 HOURS TO APPLY1 Dulux Professional DryErase dries quickly.

5 Apply in sections up to 1 metre wide by the entire Cut in edges using a small 4-5mm short nap microfibre Dulux Professional DryErase is applied in a two coat areas up to 5m2: Pour half of the mixed product into the tray and apply the first coat of Dulux Professional DryErase over the area (upto 5m2) with the roller sleeve provided. The first layer should be a thin, consistent coat over the whole area being coated. Allow aminimum of 30 minutes for this first coat to dry. During this time, wrap the roller in a cling wrap plastic or foil to keep the roller moist. Alsocover the tray with cling wrap plastic or foil to avoid it drying out or wipe the tray clean before adding remaining mixture. Pour remainingmixture into the tray and apply the second coat. The first coat may be slightly tacky after 30 minutes but can still be overcoated. The potlife will be 2 hours depending on conditions. Ensure that the 2 coats are completed within the pot life of the areas between 5m2 to 10m2: Mix one kit and use this to apply one even first coat over the entire area (up to a maximum of 10m2).

6 Allow a minimum of 30 minutes (or a max of 24 hrs) to dry prior to applying the second coat with a new fresh areas greater than 10m2: Mix one kit at a time and use this to apply one even first coat over the first 10m2 area. Use an additional kitfor every 10m2 until all of the area being painted has one even first coat. Allow a minimum of 30 minutes (or a max of 24 hrs) to dry priorto applying the second coat following the same Be sure to overlap sections 510cms and backroll the overlap for complete, consistent Ensure a new roller sleeve (supplied) and new tray liner is used for every kit mixed or applied 10m2 of product. This will avoid anypossible cross Use good lighting when applying in order to ensure even UP AFTER APPLICATIONAt the completion of your wall, any masking tape used should be removed immediately ideally while Dulux Professional DryErase is stillwet, and clean up. If you have drips on the carpet or skirting board, use water to clean those spots as soon as possible.

7 For stubbornstains use Diggers Isopropyl Alcohol. If you get it on your hands wash immediately with soap and water. If you are unable to remove tapebefore Dulux Professional DryErase dries, score the edges with safety knife before removing the 7 days to fully cure before finished Dulux Professional DryErase surface will have slight orangepeel texture; this is normal and will not affect theperformance or erasability of Dulux Professional DryErase . It is safe to use most dry erase style whiteboard markers on the DuluxProfessional DryErase not use EXPO pink whiteboard markers, red whiteboard crayons or Crayola dry erase markers. It is advisable to test noveltymarkers in an inconspicuous area first. Some novelty markers (for example fluoro markers) require wetwiperemoval. Please refer tothe specific novelty marker instructions for is a registered trade mark of Recochem Inc. EXPO is a registered trade mark of Newell Brands.

8 Crayola is a registered trademark of the Dulux Professional DryErase over a semi Gloss or Gloss acrylic coat will deliver the best holdout and maximise performanceof the top apply Dulux Professional DryErase with the supplied roller a new roller sleeve with each new kit and dispose of used Dulux Professional DryErase in rooms that are maintained at temperatures between 20 C and 30 C and below 85% relative of Dulux datasheet NZ_DD02530 approved on Wednesday, 20 March 2019 7:56:42 PM (UTC)Page 3 of 5 Health And SafetyMSDSN umberPart A: DLXNZLEN002522 Part B: DLXNZLEN002523 UsingSafetyPrecautionsKeep out of reach of children. Provide adequate windows and doors open during use and product is NOT to be sprayed. PPE (PersonalProtective Equipment) should always be worn when usingthis product. This includes safety glasses, imperviousgloves and overalls as a poisoning occurs, contact a Doctor or PoisonsInformation Centre (AUST 131 126; NZ 0800 764 766).

9 If swallowed: Rinse mouth with water. If swallowed, doNOT induce vomiting. Give a glass of contact: If in eyes, hold eyes open, flush with runningwater for at least 15 contact: If skin contact occurs, remove contaminatedclothing and wash skin inhaled: Remove from contaminated further product or application advice or a Safety DataSheet contact Dulux Customer Service AUST 13 23 77, NZ0800 800 special medical advice and emergencies call AUST1800033 111, NZ 0800 734 607 PersonalAvoid contact with skin and eyes or breathing waterproof gloves and safety glasses. Use onlyin well ventilated areas. Wash hands after involved in a fire use water fog, foam or dry breathing products of not contaminate storm water with paint or paintwashings. Do not pour left over paint down the paint containers should be left open in a wellventilated area to dry out. When dry, recycle the containervia recycling programs.

10 Disposal of empty containers viadomestic recycling programs may differ between with your local council NOT REUSE CONTAINER UNLESS THOROUGHLYDECONTAMINATEDIn the case of emergency, please call 0800 734 607 Precautions And LimitationsAll preparations and painting must conform to AS2311: The Painting of : Part B contains polyisocyanate, a chemical that is considered a respiratory and skin sensitizer, therefore this product should NOT be sprayapplied and must only be applied in a well ventilated SDS carefully for proper : This product is not - Dulux Professional DryErase White performs best over a semi- Gloss , or Gloss finish. For the best performance of Dulux Professional DryErase donot paint over a flat or matt OF Dulux Professional DryErase SURFACE - Allow 7 days to fully cure before using. Your finished Dulux Professional DryErase surface willhave slight orangepeel texture this is normal and will not affect the performance or erasability of Dulux Professional DryErase .