Closed Tray (Indirect) Procedure - Dental Services …

1 Closed tray ( indirect ) Procedure1:Screw indirect Transfers onto implants withthe Hex :For a Closed tray ( indirect ) impression, retaining screws are used that match the heightof the : Record the impression. Place light to mediumbody impression material around transfer andrecord a full-arch impression with medium :Unscrew each transfer from the implantbodies using the Hex Tool and attachthe appropriate implant replica with the sameretaining : Place the transfers back into the impressionmaterial with the replicas attached. The impression is now ready to send to the laboratory for fabrication of a stone :Use a custom tray and prepare holes that willline up with the transfers when the impressionis taken.

2 Block out holes on top of the screwswith wax or other suitable :Place light to medium body impression material around transfers and record a full-archimpression with medium body material. The screws will protrude through the :With the tray still in place, unscrew andremove all the retaining screws. Then removetray, capturing the transfers in the :After removing the impression tray , connectthe implant replicas to the transfers which arestill in place in the impression :Screw transfers and replicas together with the Hex Tool. Hold replica in place to prevent rotation of the transfer. The impressioncan now be sent to the tray (Direct) Procedure1:For an open tray (direct) impression technique,use the Direct Transfers with the long retainingscrews that are included.

3 Attach the transfers tothe implants with the Hex and Open tray ImpressionsNote: This guide is for educational use to the Zimmer Dental Prosthetics Instructions for Use (part #4894), and Tapered Screw-Vent and AdVent Implant Systems Restorative Manual (part #4941) for complete instructions for : Block out holes on top of the screws with waxor other suitable material to prevent impressionmaterialfrom Closed Rest Guide 2/14/06 9:16 AM Page 110/28 (800)-248-9943 Page 1 of 2 Tapered Screw-Vent ProstheticsTransfer ComponentsToolsTa pered Screw-Vent and Screw-Vent Implant Systems Prosthetics Order FormTapered Screw-VentImplants feature a patented fixture mount/transfer that can be used for impressions at the time of surgery or prepped asa temporary abutment.

4 2006 Zimmer Dental Inc. All rights reserved. 4917, Rev. 1 AccountShip To:Dr. NamePhone ( )AddressCityStateZipOrder DateOrdered ByShip Via Federal ExpressMust Arrive ByPayment OptionsSignature2-DayInvoiceOvernight (5:30 pm)P1 (10:30 am)CODVisaFor questions or to fax orders:In the 800 854 7019 Fax888 225 2483 Outside the +1 760 929 4300 Fax+1 760 431 7811 Australia +61 (0)2 9950 5444 Fax+61 (0)2 9975 3594 Canada +1 905 567 2073 or 1 800 265 0968 Fax+1 905 567 2076 France +33 (0)1 45 12 35 35 Fax+33 (0)1 45 60 04 88 Germany+49 (0)761 4584 722 / 723 Fax+49 (0)761 4584 729 Israel+972 (0)3 6124242 Fax+972 (0)3 6124243 Spain +34 93 846 05 43 Fax+34 93 845 43 Card #Exp.

5 DateMastercardAmExThis technique can also be performed withAdVent and SwissPlus Implant a complete list of products and tooling,please refer to the current product Cover CollarsPlatformEPLengthTHC3 3mmTHC3 3mmTHC3 3mmTHC5 5mmTHC5 5mmTHC5 5mmTHC7 7mmTHCW3/4 3mmTHCW3/5 3mmTHCW3/6 3mmTHCW5/4 5mmTHCW5/5 5mmTHCW5/6 5mmTHCW7/4 7mmTH5C3/6 3mmTH5C5/6 TransfersEmergencePlatformProfileDHT3 TransfersEmergencePlatformProfileHLT3 Tool, Hex Tool, FrictionalHex Tool, Long Tapered Frictional Hex Tool, TorqueWrench, Wrench HexDriver, Long Torque WrenchHex Driver, Closed Rest Guide 2/14/06 9:16 AM Page 210/28 (800)-248-9943 Page 2 of 2