PRODUCT DATA SHEET Polymed Limited Western …

1 PRODUCT data SHEETP olymed Limited1 & 2 Clos MenterWestern Avenue Cardiff CF14 3 AYTel029 2052 1234 Fax 029 2052 1221_____MACWAX Aerosol Wax Release Agent1 INTRODUCTIONMACWAX is a blend of waxes dispersed in rapid drying solvents andpacked in aerosol form. This PRODUCT does not contain CFCs,111-trichloroethane or any other kind of halogenated is suitable for use with many casting materials and a varietyof mould types. Typical casting materials are polyurethane epoxyacrylic and is also used extensively for moulding flexible semi-rigid andrigid polyurethane has been formulated for high quality general purpose mouldingat temperatures from ambient to may be used where a silicone release agent is undesirable suchas when the moulded part needs to be painted or may also be used as a sealant for wood stone cement and otherporous surfaces prior to moulding. Very porous substrates may requirethe application of a specialised sealant such as DS302 prior toapplication of by Weight% PROPERTIESS olids by Limited Issued: 19061997 Page 1 of 3 PRODUCT data SHEETNon- chlorinated MACWAX Aerosol_____5 PREPARATION OF MATERIALThe material is in a ready to use aerosol.

2 It should be shaken wellbefore OF USEThe aerosol can should be held 250 mm - 350mm away from the mouldsurface. The can should be kept moving during the spraying otherwisepatches of excess material will form. If possible the spray should bekept perpendicular to the area being application of a number of light coats is preferable to one heavycoat. Light coats allow the solvent to dry more rapidly and improvesthe surface application technique used will depend upon mould geometry. Deepsections undercuts and recesses often lead to incomplete coverage byshadowing parts of the mould surface from the release agent may lead to difficulty in releasing the moulded thin sprayed coat should dry within 2 minutes at 20C. Higher mouldtemperatures and a current of air over the mould will lead to shorterdrying times. Casting onto release agent which has not fully dried maycause softening of the surface of the moulded & STORAGEThis PRODUCT is flammable.

3 Refer to the relevant Safety data SHEET fordetails regarding the safe handling of this not handle or store near open flames, or sources of heat orignition. Store in a cool well ventilated flame or sources of heat or the material from direct sunlight to avoid a build up ofheat inside the not puncture or incinerate aerosol cans even when in well ventillated mask, eye protection and gloves as a minimum level of health and safety data SHEET for full Limited Issued: 19061997 Page 2 of 3 PRODUCT data SHEETNon- chlorinated MACWAX Aerosol_____This PRODUCT has a shelf life of 24 months from the original date ofmanufacture when stored as described above in the original & SAFETYThe Safety data SHEET provides details of the Health and Safetyaspects of this PRODUCT . This should be read carefully before thecontainers are opened and before storage or use.

4 Please contact usimmediately if you are not in possession of a Safety data SHEET forthis PRODUCT is available in 400ml material is available in bulk in 1l, 5l, and 25l containers FOR USEI nformation is given to the best of our knowledge and belief but withoutwarranty or liability. Materials must be tested for suitability ofapplication by the user. Finished products produced from any batch ofour materials must be subjected to comprehensive standards of qualitycontrol by the Limited Issued: 19061997 Page 3 of 3