Transcription of DIN Rail Mounting - Altech Corp
1 TypePerforatedSteel UnperforatedSteelPerforatedStainless Steel UnperforatedStainless SteelPerforatedAluminumUnperforatedAlumi numCat. 2m 202511120/1M 1m 402511110 2m 202511110/1M 1m 402511125 2m 202511125/1M 1m 402511115 2m 202511115/1M 1m 402511121 2m 202511121/1M 1m 402511111 2m 202511111/1M 1m 40 TypePerforatedSteel UnperforatedSteelCat. 2m 10CA701-15/S 1m 20CA701-15-2M 2m 10CA701-15 1m 2035 mm mm deep35 mm x15 mm deep48mm( )M618mm(.71in) 7mm (.28in)60mm ( )74mm ( )74mm( in.)52mm( in.) M618mm(.71in.)HSlot 6x15mm(. in.) 6mm(.24 in.)DIN35 DIN35 Altech DIN Rails comply with EN60715 and DIN 50045, 50022 and50035 standards.
2 DIN Rails have beenaccepted throughout the world,allowing the equipment or panelbuilder to mount a wide variety ofcontrol components, devices, termi-nal blocks, power supplies, etc. on thesame rail . The use of DIN Railsenhances design capabilities, savesspace and reduces rails are made of regularsteel with galvanic zinc plating andpassivation and are available in vari-ous configurations. Aluminum andstainless steel rails are also availablebut only in 35 mm size and mmdeep. Standard DIN Rails are available in35mm ( and 15mm deep), 32mmand 15mm widths and are supplied in1 m (3'3") and 2 m (6 6 ) request they can be cut to cus-tom lengths and punched with cus-tom holes or perforations.
3 35mm, 32mm, 15mm Perforated or un-perforated Standard rail is steel with galvanic zinc plating and passivation Aluminum rail is made of Aluminum Stainless steel rail is made of AISI 304 type stainless steelCA603 TSTWS upport BracketsSupport Brackets elevate DIN Railsaway from the panel to facilitatecomponent Mounting and toincrease wiring access. Angled brack-ets tilt the rail by 35 to improve visi-bility. Straight brackets are availablein three heights for optimum posi-tioning of the rail . Brackets mount with 2 screws to anypanel or flat surface and have tappedcenter holes for rail material is steel, zinc platedyellow 2 3 Cat. Pk.
4 CA60325 Suitable for all Mounting rails Cat. with rail Mounting hardware:including one screw & one locknutAltech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 Aluminum DimensionsUnpreforated DimensionsPreforated Steel and Stainless Dimensions18 din rail MountingAltech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 UnperforatedSteelCat. 2m 102511160/1M 1m 202511150 2m 102511150/1M 1m 20 TypePerforatedSteelCat. 1m 5032 mm x15 mm deep15 mm mm deep18 din rail Mounting
![CHART IV Height [m] Tightening torque for cable …](/cache/preview/6/a/f/4/7/b/b/c/thumb-6af47bbcb6409fcc2e4905d446934219.jpg)
