MATERIAL SAFETY SHEET - Southland Med

1 Page 1 of 3 MATERIAL SAFETY DATA SHEETS ection 1 Chemical Product and Company IdentificationALBERTO VO5 CONDITIONER EXTRA BODYCATALOG NUMBER: IC-2 Manufacturer: ALBERTO CULVER COMPANYE mergency Phone: (708) 450-3175 Business Phone: (708) 450-3135 Name of Preparer: ALBERTO CULVER COMPANY 2525 Armitage AvenueDate Prepared: May 10,2001 Melrose Park, Illinois 60160 Date Revised: January 8, 2002 (ANSI Format)MSDS ID#: 95416 Section 2 Composition, Information on IngredientsThis product contains ingredients that are not hazardous at the concentrations and combinations used. Thefinished product is not 3- Hazard IdentificationRoute(s) of EntryInhalation: ___Skin: ___Ingestion: _X_Health Hazards: Possible eye 4- First Aid MeasuresEye Contact: Rinse well with plenty of running water for at least 15 minutes.

2 Seek medical attention ifirritation Contact: Product is used to condition hair. Soap and water can be used to remove the product fromthe skin, if : If ingestion occurs seek medical 5- Fire-Fighting MeasuresPage 2 of 3 Flash Point: N/AMethod used: N/AAuto Ignition Temperature: N/AExtinguishing Media: _X_ Water Spray _X_ Foam _X_ Carbon Dioxide _X_ Dry ChemicalSpecial Fire Fighting Procedures: NoneUnusual Fire and Explosion Hazards: NoneSection 6 Accidental Release MeasuresSmall spills can be cleaned up with rags, paper towels or a mop. Large spills can be picked up with aninert absorbent. Contaminated absorbent should be disposed of properly. Rinse area with water to removeresidual product. Beware of slippery 7- Handling and StorageCool dry storage. Protect from freezing. Keep out of reach of 8 Exposure Controls and Personal ProtectionSpecified Respiratory Protection: None required for normal usage Protective Gloves: None requiredVentilation required: None required for normal usage Eye Protection: Keep out of eyesOther Protective Equipment: N/A Work/Hygienic Practices: N/ASection 9 Physical and Chemical PropertiesPhysical Form: Viscous LiquidBoiling Point: N/AMelting Point: N/ASpecific Gravity: : 4-5 Water Solubility: Water dispersibleVapor Density (air=1): Greater than 1 Appearance: Opaque liquidEvaporation Rate (Water=1): >1 Odor: Characteristic perfumeSection 10 Stability and ReactivityProduct is stableIncompatibility (materials to avoid): None knownHazardous Decomposition or Byproducts.

3 Carbon Monoxide, Nitrogen compounds, Carbon Dioxide,Hydrogen Chloride and unidentified organic compounds may be formed during polymerization cannot occur. Conditions to Avoid: Protect from extreme heat and 11- Toxicological InformationMedical Conditions Generally Aggravated by Exposure: None 3 of 3 Section 12 Ecological InformationLarge quantities should not be discharged into waterways to prevent pollution of the 13 Disposal ConsiderationsEmpty containers can be disposed of in the trash or recycled if facilities exist. Contact a licensed wastemanagement company for disposal of a large number of filled 14- Transport InformationThe following information is presented only as a guideline as shipping regulations frequently shipper is responsible for checking the current US AND INTERNATIONAL SHIPPINGH azardous materials description and proper shipping name: NoneHazard class: N/AIdentification number: NoneLabels required: NoneFor shipping to any destination, appropriate packaging materials and labels must be used.

4 If classified ashazardous, see UPS Guide for Shipping Ground and Air Hazardous Materials, IATA Dangerous GoodsRegulations (38th Edition), US Dept. of Transportation Regulations in 49 CFR 172. et seq., IMO andICAO guidelines. If applicable, Parcel to be packed with closures upward and to be marked with packageorientation arrows on two opposite vertical sides of the package. The arrows must point in the correctUPRIGHT 15 Regulatory InformationThis product has been classified according to the hazard criteria of the CPR and the MSDS contains all ofthe information required by the 16 - Other InformationNotice: The information presented herein is based on experimental data submitted by the manufacturers ofthe raw materials and is considered scientifically correct, however, no warranty, expressly implied orotherwise, is made to the accuracy or suitability of this information to the purchaser's intended purpose orfor consequences of its use.

5 Use these materials only as directed. For further information concerningproduct SAFETY and use, call the number listed on the front of the MSDS.