PMA Transmitter P40/P41 - phu-wega.pl

1 PROFILET hese transmitters are intended for quali-fied applications in the area of industrialpressure. Thelowest measuring rangefor the P40 is mbar, respectivelyfor P41 it is bar. Both types(P40/41) are available for gauge as alsofor absolut pressure highest measuring range for bothversions is overload is four times thenominal span (max 600 bar).DESCRIPTIONThe linear characteristic with a conformityof typical 0,3 % provides precise measuringresults. The sensors low mass ennablesfast of very fast respectivly very highpressure peaks caused by rapid actingshut off valves etc. can be suppressed byselecting a built-in mechanical sensing element consists of a siliconpressure sensor with an isolated thin-filmstrain gauge.

2 This mesuring principlefeatures a wide temperature range, lowthermal effects and excellent long termstability. Furthermore, the small dimen-sions ensure good response to pulsatingpressures and vibrating medias and isimmune to local P40 Transmitter has a process couplingwith an internal sealing diaphragm made ofSS . The version P41 features aflush-mounted sealing oil is used for the pressure transferto the sensing element. For Oxygen useand for the automotive industry also inertoil can be selected as filling P41 with mechanicaldamping do have a mechanical bafflefitted to all ranges 40 bar as anadditional amplifier electronics are avalable intwo versions.

3 Two wire technique mA and three-wire technique , V or V required the transmitters can besupplied also with conformity certificatefor use in explosion hazarded transmitters are suitable ifsupplied with a certified power supplyfor use in group II category 1respectively 2 to ATEX 100a to EC 94 DATAINPUTM easuring spansTypeGaugeAbsoluteSpanminimummaximum barOverload limit4 x nominal span, max. 600 bar(static overload)Overload effect 0,1 % of spanWetted partsDiaphragm: SS 316L(X2 CrNiMo 1810) ( )Coupling: SS 304 (X5 CrNi 189) ( )With P41/ Elastomer-gasket: Viton (FKM)Process mediaGases, vapours and liquidsProcess couplingTypeP40P41G AEN 837 (DIN 16288)-G AEN 837(DIN 3852) FormDM12x1,5 Gaskets/ seals required Delivery does not include , gasket type B to DIN 16258,P41, Metal: gasket A21 x 26 mm Select material to application Delivery comprisesP41, Elastomere seal: VITON (FKM)Filling liquidTransmitter P40 and P41 commonly arefilled with Silicon SIGNALTwo-wire technology: mAThree-wire technology.

4 5 6 VCharacteristic:linearTransmitter P40/P41 Pressure transmitterAbsolute- and gauge pressureRanges from 250 mbar up to 400 barConformity 0,3 % (typical)Two- and three-wire technologyLocal zero- and span adjustmentFlush mounted diaphragm- as manometer couplingHigh overload capacityATEX approval II G 1 / 2; EEx ib IIC T6 PMAC onformity errorTypical 0,3% of spanMaximum 0,5 % of span(Fixed point adjustment) mARL[ ]=US- 12[V] / 0,02 [A] VRL[ ]?5k ; VRL[ ]?2k Hysterisis: 0,1 % of spanSettling time*)approx. 5 ms current signalapprox. 12 ms voltage signalZero- and span adjustmentBy means of potentiometer 5%(onlyconnector type A and circular connector )POWER SUPPLYTypeSupply voltage USEffect USTwo 30 VDCfor Ex VDC**) 0,1 %Three V VDC 0,1 %Three VDC 0,1 %Permissible rippleNo effect at 0,5 % with 24 VDCEXPLOSION PROTECTIONP rotection according RL 94/9 CEeII 1/2 Gresp.

5 II 2 G; EEx ib IIC T6CE type test certificatePTB {03 ATEX 2203}to EN 50 014; EN 50 028; EN 50 284 MountingWithin hazardous zone 1 respectivelyattached to zone 0 (P41)AMBIENT CONDITIONSP ermissible ambient +70 C, +65 C for Ex versionPermissible process +70 CStorage temperature-40 +85 CTemperature effectSpan startSpantypical0,2%/10K0,2%/10 Kmaximum0,4%/10K0,4%/10 KSpan 0,6 barplus 0,1 %/10 Kplus 0,1 %/10K2 Transmitter P40/41*) other settling times on request, minimumapprox. 1,5 ms without mechanical, respectively5 ms with mechanical damping device.**) certified power supply electrical connections 25 bar 15125 bar 156 25 bar 14225 bar 147IP 40 = 70IP 65 = 65() 25 bar 11625 bar 120() 25 bar 14225 bar 147() 25 bar 16825 bar 172() 25 bar 10725 bar 111() 25 bar 13325 bar 138() 25 bar 15925 bar 1633138179543952079377037() G AG AM20 x 1,565~52~4226 26 26 17,7 / IP 40SW 27l = 1,5 m 24 / IP 65PG 11PG 7 Fig.

6 2 dimensions P40135*IP40=70IP65=65127*168*100*7270543 9314*70376237G AM20x1,5~52~4226 26 26 17,7/IP40SW 27 26l = 1,5 m 24/IP65PG 11PG 7*+4mm/ mech- D mpfungmech. damping/ P 40 bar Fig. 3 dimensions P41 Connector to DIN 43650 Cylindrical connector / fixed cable1 Two-wireOutput+red Output+2 Output-black (not connected)3not connectedwhite Output-4-----------------blue (not connected)KMeasuring ground=S green1 Three-wireOutput+red Output+2 Supply & Output-black Supply+3 Supply+white Supply & Output -4----------------blue (not connected)KMeasuring ground=S greenClimatic category4Z (with Z=+70 C)ELEKTROMAGNETICCOMPATIBILITYTo EN 50 082 Effect < 1 %CE labelledGENERALH ousingStainless steel, SS 304 ( )Plug PolyamideHousing protectionVersion with connector: IP 65 / Nema 4 With fixed cable.

7 IP68 / Nema 6P (1m WC)Electrical connection Angled connector to DIN 43650/AAngled connector to DIN 43650 type Binder, Series 680 Fixed cable, 4 x 0,22 mm ,screened, with reference capillaryMounting position:not critical**)Mounting Via process coupling according to must be assured that during mounting inliquid filled pipes/containers the displacedvolume freely can escape. For processtemperatures above + 70 C the use of asyphone is torque effectBy means of recommended gaskets: 0,2 %Torque: 40 Nm (29,5 lbf ft)Weight:approximately 0,25 kgAccessoryOperations 9499-040-50001 Safety instructions foreapproved devices 9499-047-10901 ORDERING STRUCTURET ransmitter P40/413**)Effect with span 250 mbar and 90 0,3 %BCA90 Fig.

8 4 bore to DIN 3852 (P41)ThreadA [mm]B [mm]C [mm]M 20 x 1,518,5262G A -in272,59440127012G AEN837M 20 x 1,5 EN 837G AEN837 Process coupling P41, flush diaphragmProcess-coupling P40(DIN 16 288 Form B)Angled connector to DIN 43650/AAngled connector to DIN 43650/CCylindrical connector (Binder, see accessories)Fixed cable, 1,5 m lengthFixed cable, length to specificationElectrical connection04259 Output mA, mA, 6 V 5 20 mA,II1/2G,zone 0eII 2 G, zone 0,25 0,4 1,0 1,6 2,5 4 6 10 16 25 40 60 barSpecial 1,0 1,6 2,5 4 6 10 16 25 40 60 barSpecial range02030405060708091011121314151617181 9232728293031323334353637383940414243444 8555657585960616263646566676869738081828 3848586878889909192939498 Coupling withbuilt-inmechanicaldamping device /flame trap1)1)2)2)4)2), 5)

9 G A EN 837; metal sealM 20 x 1,5 EN 837; metal sealG A EN 837; FKM sealM 20 x 1,5 EN 837; FKM seal56786)3)3)7)Explanation for footnotes see next pageCYL. CONNECTORACCESSORIESD escriptionOrder- IP 40 With 1,5 m screened cable,4 x 0,14 mm 4012-151-62841 Socket IP 65 With 1,5 m screened cable,4 x 0,14 mm 4012-151-62851 ACCESSORIESPLUG-ON DISPLAY FORPRESSURE TRANSMITTERS Loop powered. Free scalable via push buttons Polarity independent connectionTECHNICAL DATAI nput mAVoltage drop:approx. 3 VAccuracy: 0,2 % measuring :LCD, 10 mmDisplay span:-1999 bis + 9999 Scaling:free scalable via three internalpush buttonsDecimal point:free settableFilterin 3 steps addibleTemperature effect:approx.

10 100 ppmElectrical connection:adaptor plug forconnector type A, DIN 43650 Dimensions:with adapterLxWxD50,5 x 90 x 39,5 [mm]DescriptionOrder noPlug-on display9404 799 816511)Other spans and span starts on request Span start: - +50%ofcorresponding nominal span Span: 50 % ..150 % ofcorresponding nominal span measuring limit with vacuum:10 mbar absExample 1:Nominal range ,6 bar gauge, smallestpossible span start -0,6 bar (-100%)Largest span start 0,3 bar (+50 %)Smallest span: 0,3 bar (50 %)Largest span: 0,9 bar (150 %).Thus a measuring range -0,6 up to +0,3 barg can be 2:Nominal range ,6 bar absoluteSmallest span start 0 bar abs (10 mbar)Largest span start 0,8 bar abs (+50 %)Smallest span 0,8 bar abs (50 %)Largest span 2,4 bar abs (150 %)Thus a measuring range of0,8 bar abs up to 1,6 bar abs can be )No access to potentiometers for span andspan startDeutschlandPMA Proze - und Maschinen- Automation GmbHMiramstrasse 87, D-34123 : (0561) 505 - 1307/-1710E-mail.