Novafast

1 Novafast is a global company o ering cutting-edge technology in composite pipes and materials. It is estimated that the world demand for composite pipes is approxi-mately $17 billion and rising, not including other necessities such as installation, logistics and consultancy. Novafast is already preparing for the present and future demands of the market. Novafast is an Australian company supplying composite pipes, epoxy based treatments, waterproof chemicals, membranes to joint and grouts, coatings and related products o ers complete design systems for structures, plant and equipment, where on-going costs of corrosion are not only counted in downtime, but also in the increasing costs attributed to environmental and safety s expertise is the blueprint for our company to operate e ectively and consistently across our businesses directly or through licensed contractors, our capabilities extend across a broad range of service solutions already succesfully delivered on-shore and o -shore, always o ering innovative technologies to diverse industries, such as.

2 Globally, Novafast s composite technology can provide design and construction solutions to meet your application /WastewaterIndustry /EnergyOil &GasResources& MiningDefence &MarineMaintenanceAbout usInnovative Pipe Systems for Critical ProcessesNovaFlo GRE High Pressure Pipes Anti Corrosion and Waterproo ng Products199 Franklin StreetAdelaide,SA 5000 AustraliaPhone: 1300 715 463 and SupplyNovafast is a global company o ering cutting-edge technology in composite pipes and materials. It is estimated that the world demand for composite pipes is approxi-mately $17 billion and rising, not including other necessities such as installation, logistics and consultancy. Novafast is already preparing for the present and future demands of the market. Novafast is an Australian company supplying composite pipes, epoxy based treatments, waterproof chemicals, membranes to joint and grouts, coatings and related products o ers complete design systems for structures, plant and equipment, where on-going costs of corrosion are not only counted in downtime, but also in the increasing costs attributed to environmental and safety s expertise is the blueprint for our company to operate e ectively and consistently across our businesses directly or through licensed contractors, our capabilities extend across a broad range of service solutions already succesfully delivered on-shore and o -shore, always o ering innovative technologies to diverse industries, such as.

3 Globally, Novafast s composite technology can provide design and construction solutions to meet your application /WastewaterIndustry /EnergyOil &GasResources& MiningDefence &MarineMaintenanceAbout usInnovative Pipe Systems for Critical ProcessesNovaFlo GRE High Pressure Pipes Anti Corrosion and Waterproo ng Products199 Franklin StreetAdelaide,SA 5000 AustraliaPhone: 1300 715 463 and SupplyInnovative Pipe Systems for Critical ProcessesNovaFlo GRE High Pressure Pipes Anti Corrosion and Waterproo ng Products199 Franklin StreetAdelaide,SA 5000 AustraliaPhone: 1300 715 463 pipes are made by high-strength continuous breglass lament winding process, with exclusively self-retained manufacturing techniques. Our self-developed internal heating curing technique and computer controlled winding allows quality control during the whole course of production. We are always pursuing new techniques to improve our products, with continuous innovation as a focus to providing the best solutions for the ProcessSelection and Inspection of Raw MaterialBefore selecting raw materials, we make an overall evaluation for production, checking through our quality control material inspection standards are stablished according to the pipe quality requirements and each item is examined and inspection procedures are performed Windingby Microcomputer Automatic ControlPipe Curingby PLC Automatic ControlProduct Inspection100% Product Appearance Inspection, 100% Hydrostatic Pressure Test, TG Test, Short-Time Hydraulic Failure Pressure Test, Thread Parametric Test.

4 Certi cate of Analysis and ControlGRE/GRP TechnologyInnovative Pipe Systems for Critical ProcessesNovaFlo GRE High Pressure Pipes Anti Corrosion and Waterproo ng Products199 Franklin StreetAdelaide,SA 5000 AustraliaPhone: 1300 715 463 pipes are made by high-strength continuous breglass lament winding process, with exclusively self-retained manufacturing techniques. Our self-developed internal heating curing technique and computer controlled winding allows quality control during the whole course of production. We are always pursuing new techniques to improve our products, with continuous innovation as a focus to providing the best solutions for the ProcessSelection and Inspection of Raw MaterialBefore selecting raw materials, we make an overall evaluation for production, checking through our quality control material inspection standards are stablished according to the pipe quality requirements and each item is examined and inspection procedures are performed Windingby Microcomputer Automatic ControlPipe Curingby PLC Automatic ControlProduct Inspection100% Product Appearance Inspection, 100% Hydrostatic Pressure Test, TG Test, Short-Time Hydraulic Failure Pressure Test, Thread Parametric Test.

5 Certi cate of Analysis and ControlGRE/GRP TechnologyInnovative Pipe Systems for Critical ProcessesNovaFlo GRE High Pressure Pipes Anti Corrosion and Waterproo ng Products199 Franklin StreetAdelaide,SA 5000 AustraliaPhone: 1300 715 463 centre works closely with universities and educational organisations to enhance our design standards for piping in Oil and Gas, Marine and Defence industries. We count on with specialized professionals to develop and test our products to guarantee superior of Excellence forComposites Researchand Development Resin analysis and testing: Degree of Curing (%) Heat Distortion Temperature (HDT) Glass Transition Temperature (TG) Gel-Time Spectroscopic Analysis (FTIR GC/MS) Microwave Scanning AnalysisMore details about the tests:Fully Accredited Pipe andComposites Training Course At Novafast we know when composite materials are installed correctly, end users get maximum operating bene ts from their NovaFlo or NovaLine piping systems.

6 It is proven that most composite pipeline failures occur at the commissioning phase of a project; it is our vision to ensure this does not happen. We implement this by enrolling Pipe Installers and Supervisors through to Engineers and Quality Inspectors in our specialised courses. Each course has both a practical and theory component. The participant is then required to demonstrate their understanding of NovaFlo or NovaLine piping systems by completing a closed book examination. On completion of the nominated course, the student is issued a certi cate in accordance with: RIICRC208D Lay Pipes ISO 14692-4 D4 GRE Jointer ISO 14692-4 D5 GRE Supervisor ISO 14692-4 D6 GRE Inspector Our courses are the rst of its kind, as we simulate live worksite with in eld experiences. The course can also be set up on site for a nominated that the construction industry is the most challenging and potencially dangerous of industries, we believe in educating the work force before they undertake the Description Composite materials testing Tensile, flexure, compression, shear, marine survey packages Load testing Static and dynamic load capacity for large scale structures, compression loading facilities Adhesives Lap shear, tensile, peel and bond testing Sandwich panel constructions Tensile, bending, density and impact resistance Neat resin testing Tensile, compression, flexural, water absorption, Barcol hardness Instrumentation and data acquisition Data acquisition capabilities including strain gauging, load measurements for laboratory.

7 In-house and on site measurements Material characterisation Third party verified certification testing Customised test packages Specialised testing Fire t esting of Composite products Establishing a composite material that can handle fire resistance of up to 1500 C Stress AnalysisInnovative Pipe Systems for Critical ProcessesNovaFlo GRE High Pressure Pipes Anti Corrosion and Waterproo ng Products199 Franklin StreetAdelaide,SA 5000 AustraliaPhone: 1300 715 463 centre works closely with universities and educational organisations to enhance our design standards for piping in Oil and Gas, Marine and Defence industries. We count on with specialized professionals to develop and test our products to guarantee superior of Excellence forComposites Researchand Development Resin analysis and testing: Degree of Curing (%) Heat Distortion Temperature (HDT) Glass Transition Temperature (TG) Gel-Time Spectroscopic Analysis (FTIR GC/MS) Microwave Scanning AnalysisMore details about the tests:Fully Accredited Pipe andComposites Training Course At Novafast we know when composite materials are installed correctly, end users get maximum operating bene ts from their NovaFlo or NovaLine piping systems.

8 It is proven that most composite pipeline failures occur at the commissioning phase of a project; it is our vision to ensure this does not happen. We implement this by enrolling Pipe Installers and Supervisors through to Engineers and Quality Inspectors in our specialised courses. Each course has both a practical and theory component. The participant is then required to demonstrate their understanding of NovaFlo or NovaLine piping systems by completing a closed book examination. On completion of the nominated course, the student is issued a certi cate in accordance with: RIICRC208D Lay Pipes ISO 14692-4 D4 GRE Jointer ISO 14692-4 D5 GRE Supervisor ISO 14692-4 D6 GRE Inspector Our courses are the rst of its kind, as we simulate live worksite with in eld experiences. The course can also be set up on site for a nominated that the construction industry is the most challenging and potencially dangerous of industries, we believe in educating the work force before they undertake the Description Composite materials testing Tensile, flexure, compression, shear, marine survey packages Load testing Static and dynamic load capacity for large scale structures, compression loading facilities Adhesives Lap shear, tensile, peel and bond testing Sandwich panel constructions Tensile, bending, density and impact resistance Neat resin testing Tensile, compression, flexural, water absorption, Barcol hardness Instrumentation and data acquisition Data acquisition capabilities including strain gauging, load measurements for laboratory.

9 In-house and on site measurements Material characterisation Third party verified certification testing Customised test packages Specialised testing Fire t esting of Composite products Establishing a composite material that can handle fire resistance of up to 1500 C Stress AnalysisHigh Technology inGRE/GRPP ipes & FittingsProduction Range: Diameter: DN 40 ~ 1000mm, Pressure Rating: 25 Mpa Implemented Standards: API15 HR API15 LR ISO14692 Temperature-resisting Grade: Fire testing of Composite products - Long-term working temperature range of anhydride cured epoxy system 65 , to 80 C Long-term working temperature range of amine cured epoxy system C, to 135 C Minimum working temperature of epoxy GRE pipe -35 CProduct Properties: 1. High corrosion resistance durability against fatigue 3. Service life can be designed to meet client requirements 5.

10 Light weight, easy installation 6. Seanless connection to steel pipe7. Multiple pressure options to comply with design and construction8. No electrical conductivity9. Smooth internal surface - no scaling High Pressure GRE/GRP Pipes - Anhydride CuredEpoxy and Aromatic Amine Cured EpoxyType of Connections - GRE/GRP PipesNovaFlo Key Lock ConnectionBell and Spigot Adhesive ConnectionFlange ConnectionButt & Strap Joint ConnectionMat Corrosion Barrier and SealantTrapezoidal Thread ConnectionCoupling ConnectionThreaded ConnectionNovaFlo High Technology inGRE/GRPP ipes & FittingsNovaFloProduction Range: Diameter: DN 40 ~ 1000mm, Pressure Rating: 25 Mpa Implemented Standards: API15 HR API15 LR ISO14692 Temperature-resisting Grade: Fire testing of Composite products - Long-term working temperature range of anhydride cured epoxy system 65 , to 80 C Long-term working temperature range of amine cured epoxy system C, to 135 C Minimum working temperature of epoxy GRE pipe -35 CProduct Properties: 1.