Type WMF Polyester Film Capacitors - CDE

1 Type WMF Polyester film CapacitorsFilm/Foil, Axial Leads - Commercial, Industrial ApplicationsSpecificationsType WMF axial-leaded, Polyester film /foil Capacitors , available in a wide range of capacitance and voltage ratings, offer excellent moisture resistance capability with extended foil, non-inductive wound sections, epoxy sealed ends and a sealed outer wrapper. Like the Type DMT, Type WMF is an ideal choice for most applications, especially those with high peak currents.

2 ( )( )L to 5 FCapacitance Tolerance @ 1 kHz/25 C 10% (K) Standard Tolerance, 5% (J)/ 20% (M) (Optional)Rated Voltage50 to 630 Vdc Operating Temperature Range 55 C to 125 C**Full rated voltage at 85 C - derated linearly to 50% rated at 125 CInsulation Resistance30,000 M x F, 100,000 M Max. (25 C, 1 kHz)Dielectric Strength250% Life Test500 Hours at 85 C at 125% Rated VoltageRoHS CompliantDimensionsConstruction DetailsCase MaterialUL510 Polyester Tape WrapResin MaterialUL94V-0 Epoxy FillTerminal MaterialTin Plated Copper - Clad SteelCDE Cornell Dubilier 1605 E.

3 Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 Highlights- Very high dV/dt- Very high peak current- Low WMF Polyester film CapacitorsFilm/Foil, Axial FPart NumbermmmmmmV/ s FPart NumbermmmmmmV/ s50 Vdc100 Vdc : Other ratings, sizes and performance specifications are available. Contact Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 WMF6P22K - FCapacitance RoHS Compliant IndicatorCapacitanceSignificantTolerance SeriesVoltage CodeDecimal PointFigures FCodeWMF 05 = 50 Vdc4 = 400 Vdc S = = 10 1 = 100 Vdc6 = 630 Vdc P = 0.

4 2 = 250 Vdc W = No decimal point Part Numbering SystemType WMF Polyester film CapacitorsFilm/Foil, Axial FPart NumbermmmmmmV/ s FPart NumbermmmmmmV/ s100 Vdc Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 Type WMF Polyester film CapacitorsFilm/Foil, Axial FPart NumbermmmmmmV/ s FPart NumbermmmmmmV/ Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the Information ) in this datasheet or other publication are subject to change.

5 The customer is responsible for checking, confirming and verifying the extent to which the Information con-tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran-tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements ( Cornell Dubilier )

6 Has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-tion regarding any such matter and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application.

7 Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur.

8 Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi-cated in such warnings, cautions and notes, or that other safety measures may not be required.