COPPER-REINFORCED EPOXY PUTTY STICK - Polymeric Systems

1 Freezebreaks Leakinghouseholdhot water lines Other plumbingproblems in15 copper gutters anddownspouts Leaks in pipes Elbows Joints Sleeves To damp, wet,slow-leaking surfacesCOPPER-REINFORCED EPOXY PUTTY STICKQuikCopper Repair and rebuild anything made of copper The ultimate solution for small oremer gency repairs Easy-to-use and mistake-proof Bonds instantly with superior str ength Saves hundreds of dollars in repairs Belongs in every toolboxJoins and sealscopper downspouts!Fixes fr eeze br eaksMade in fr eeze br eaksin minutes!Stops leaks quicklyand easily!QuikCopperCopper-Reinforced EPOXY PUTTY StickProduct DescriptionQuikCopper is a hand-mixable, fast-setting, COPPER-REINFORCED EPOXY puttythat quickly repairs pipes, tanks and vessels made of copper , brass, bronzeand other non-ferrous metals.

2 After mixing, it forms a polymer compoundthat is extremely tough and durable and offers exceptional adhesion. Eachhandy STICK contains pre-measured portions of activator and base throughout no measuring or mixing tools are necessary. The consistency (like modelingclay) eliminates drips and runs, facilitates adhesion to the substrate, andallows the material to be shaped as needed before curing begins. After60 minutes the application can be drilled, sawed, sanded, and hot water pipes and vessels can be restored to service after1 hour. Cured QuikCopper has the same appearance and texture of for interior or exterior use, it is resistant to water, chemicals, andtemperature extremes.

3 It contains no VOCs or solvents. It's non-flammableand releases no noxious fumes. It won't shrink or pull away. The unusedportion stays fresh for future use when saved in its original Data*SHELF LIFE AT 75 F (24 C)24 months minimumSHORE D HARDNESS AT FULL CURE (24 hrs)80 LAP SHEAR TENSILE STRENGTHOn steel (1" x 1" x 1/16")650 lbs ( MPa)On copper (1" x 1" x 1/16")700 lbs ( MPa)COMPRESSIVE STRENGTH8,000 psi (55 MPa) lb/gal, gm/cm3 SHRINKAGE<1%NON-VOLATILE CONTENT100%ELECTRICAL RESISTANCE30,000 megohms-cmDIELECTRIC STRENGTH300 volts/milTEMPERATURE LIMITSC ontinuous-40 to 250 F (-40 to 121 C)Intermittent-40 to 300 F (-40 to 149 C)CHEMICAL RESISTANCER esistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and INTENDED FOR STRUCTURAL APPLICATIONS*Not to be used for specification To UseBefore applying, roughen and clean the area to be impervious gloves when mixing or handling uncuredQuikCopper.

4 Then follow these easy Cutor twist off required Mixby kneading with gloved fingers toa uniform color. If mixing is difficult, warm QuikCopper toroom temperature or slightly Applyto surface to be repaired within 2 minutes of into any cracks or holes, and extend the patch at leastone-half inch beyond the area being applying to a damp, wet or slowly leaking area, work themixed material forcefully into the surface and apply pressure untiladhesion begins to take best results:Use damp fingers for easier mixing, application,and a smooth appearance of the cured compound. Remove excessmaterial before hardening :QuikCopper has a 3- to 5-minute work life. Functional cureoccurs within 60 minutes.

5 Contains EPOXY Resin and Tri (dimethylaminomethyl) phenol. Skin and eyeirritant/sensitizer. Direct product contact may cause allergic reaction in someindividuals. Wear impervious gloves when mixing or handling uncured contact with eyes. Inhalation of dust may be harmful; wear dust maskand protective eyewear when sanding cured product. Ingestion of productmay be harmful. KEEP OUT OF REACH OF CHILDREN. See product i nsertor SDS for additional information. WARNING1. Cut2. Mix3. Apply3 MINUTEWORKLIFEM ixed ColorCOPPERA vailabilityQuikCopper is one in a family of Specialty EPOXY Putties originated and manufactured byPolymeric Systems , Inc. Also look for QuikAluminum, QuikPlastik, RepairitQuik, FastSteel, AquaMend, InstaCrete, QuikWood, andQuikTitanium.

6 Our EPOXY putties give you the abilityto fix just about OptionsQuikCopper is available in " (2 oz) and 7" (4 oz)lengths. Individually packaged in a reusable clearplastic tube with trilingual (English, Spanish, French)instructions and plastic friction top. The display cartonholds 12 or 24 - sticks or 12 - 7 sticks (packed 2 display cartonsper master carton), or bulk-packed 24 sticks per shipper carton. Displaycartons are also sold separately for refillable, point-of-purchasedisplay. " sticks are also available in blister packs (12 per carton);printer minimum applies. Contact Sales for acrylic display rack CardboardDisplay CartonAcrylicDisplay Racks4022--0213 Polymeric Systems , Inc.

7 , is a part of WhitfordWorldwide. For more information, pleasecontact Polymeric Systems or Whitford Ltd. at: Polymeric Systems , Park AvenueElverson, PA 19520888- EPOXY FIX (888-376-9934)Tel: +[1] (610) 286-2500 Email: the EU contact:Whitford Stuart Road, Manor ParkRuncorn, Cheshire, UK WA7 1 THTel: +[44] (0) 1928 571000 Email: Polymeric Systems , Inc. 2013 NON-WARRANTY: ALL RECOMMENDATIONS, STATEMENTS AND TECHNICAL DATA CONTAINED HEREIN ARE BASED ON TESTS WE BELIEVE TO BERELIABLE AND CORRECT, BUT ACCURACY AND COMPLETENESS OF SAID TESTS ARE NOT GUARANTEED AND ARE NOT TO BE CONSTRUED ASA WARRANTY, EITHER EXPRESS OR IMPLIED. USER SHALL RELY ON HIS OWN INFORMATION AND TESTS TO DETERMINE SUITABILITY OF THE PRODUCTFOR THE INTENDED USE, AND USER ASSUMES ALL RISK AND LIABILITY RESULTING FROM THIS USE OF THE PRODUCT.

8 MANUFACTURER S SOLERESPONSIBILITY SHALL BE TO REPLACE THAT PORTION OF THE PRODUCT OF THE MANUFACTURER THAT PROVES TO BE SHALL NOT BE LIABLE TO THE BUYER OR ANY THIRD PARTY FOR INJURY, LOSS OR DAMAGE DIRECTLY OR INDIRECTLY RESULTINGFROM USE OF, OR INABILITY TO USE, THE PRODUCT. RECOMMENDATIONS OR STATEMENTS OTHER THAN THOSE CONTAINED IN A WRITTENAGREEMENT SIGNED BY AN OFFICER OF THE MANUFACTURER SHALL NOT BE BINDING UPON THE StandardsCertified by NSF International to NSF/ANSI Standard 61 fordrinking water conforms to ASTM D-4236.