PDF4PRO

WINCH LEAD ROTATION - KFI Products

WINCH LEAD ROTATIONA1. Remove bolts (A) on motor end cap as shown in Figure 1&2. Figure 1 2012 Copyright Kappers Fabricating, Inc. All rights reservedA Figure 4 ADBC Figure 2 2. Remove motor end cap (B) and rotate 90 degrees. Make sure that the brushes (C) are seated properly be for reinstalling end cap. Note: On some winches you many need to rotate the motor housing (D) as the magnets are not always spaced the Reinstall bolts (A) and tighten down. Figure 3 Threaded ROTATION Holes

Fullscreen Download

Tags:

Deal, Winch, Rotation, Winch lead rotation

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of WINCH LEAD ROTATION - KFI Products

1 WINCH LEAD ROTATIONA1. Remove bolts (A) on motor end cap as shown in Figure 1&2. Figure 1 2012 Copyright Kappers Fabricating, Inc. All rights reservedA Figure 4 ADBC Figure 2 2. Remove motor end cap (B) and rotate 90 degrees. Make sure that the brushes (C) are seated properly be for reinstalling end cap. Note: On some winches you many need to rotate the motor housing (D) as the magnets are not always spaced the Reinstall bolts (A) and tighten down. Figure 3 Threaded ROTATION Holes