Gas Pressure Regulator RMG 361 - E-Gaz Malzemeleri ...

1 Gas Pressure Regulator RMG 361serving the Gas industryworldwideproduct information2 Gas Pressure Regulator rmG 361 Application, characteristics, technical dataapplication Gas Pressure regulators (GDR) for commercial and industrial gas installations as well as local supply installa-tions can be used for natural gas and all non-corrosive gasescharacteristics GDR with integrated SAV safety shutt-off valve and optional SBV safety relief valve for gas leakages max. valve diameter= nominal size = DN SAV safety shut-off valve with axial flow; Pressure compensation valve (internal by pass) integrated in shut-off valvetechnical datamax. allowable Pressure PS10 barsetting rangespring in bar* RE 0* RE 1 / RE2* RE 30 / blue0,020 .. 0,0301 / grey0,025 .. 0,0500,020 .. 0,0302 / yellow0,045 .. 0,1000,020 .. 0,0503 / brown0,090 .. 0,2000,045 .. 0,1004 / bright red0,150 .. 0,3000,075 .. 0,1505 / dark red0,250 .. 0,4000,125.

2 0,2006 / light blue0,350 .. 0,5000,175 .. 0,2507 / white1,0 .. 2,50,450 .. 0,6008 / green2,0 .. 4,00,550 .. 0,8009 / black0,650 .. 1,000* RE = regulating assembly< 0,020 bar - special feature at optionaccuracy class AC andlock-up Pressure class SGpa-range in barACSG **0,020 .. 0,0301030/50> 0,030 .. 0,1001020/30> 0,100 .. 0,500510/20> 0,500 .. 1,0002,510> 1,000 .. 4,000 5 10pipe sizes connectionDN 25, DN 50, DN 80, DN 100:DIN flanges PN 16DN 50, DN 80:ANSI 150materialsmain valve body and SAVactuator diaphragmdiaphragms, sealingsinternal partsductile ironsteel, aluminium alloyrubberaluminium alloy, steel, brasstemperature range, class 2-20 C to +60 Cfunction and strengthacc. to DIN EN 334 and DIN EN 14382 DIN-DVGW registration 1 AS 00943 Gas Pressure Regulator rmG 361 Application, characteristics, technical datadevice sizesDNvalve seatdiameter[mm]KG value in m3/h (for natural gas, n=0,83 kg/m3)max inlet Pressure pumax (bar)*regulating assembly REwithout noise reductionwith noise reductionRE 0RE 1RE 2RE 3DN 2525370approximately10 % loss ofcapacity1010314601010DN 5031800101010501400106 (10)10DN 8060220010105802700106 (10)5DN 10060290010105803700106 (10)51004200104 (8)5*) The limitation of the inlet Pressure range pumax for a diaphragm assembly RE 1 and RE 2 is not given for reasons of material strength but in the interest of maintaining the regulating accuracy.

3 The inlet Pressure deviations though may not exceed the limit of the valve s nominal Pressure rating. The accuracy classes AC and lock-up Pressure classes SG are fixed by the DVGW type tests. The maximum value that is within the allowed exceeding limits is the value indicated in ranGes of sav safety shut-off valve rmG 673, K 1 and K2 acontrol devicesetpoint springupper response Pressure *lower response Pressure *responsepressuregroupAG** in mmadjustablerangeWao (bar)smallest differencebetween responsepressure and normaloperating Pressure p (bar)adjustablerangeWau (bar)smallest differencebetween responsepressure and normaloperating Pressure p (bar)K1a1yellow2,500,050 .. 0,1000,03010 / 5,02bright red3,200,080 .. 0,2500,05010 / 5,03dark red3,600,200 .. 0,5000,1005 / 2,54white4,750,500 .. 1,5000,2505 / 2,55yellow1,000,010 .. 0,0150,012156white1,200,014 .. 0,0400,03015 / 5,07black1,400,035 .. 0,1200,0605K2a2bright red3,200,400.

4 0,8000,10010 / 5,03dark red3,600,600 .. 1,6000,20010 / 5,04white4,751,500 .. 5,0000,3005 / 2,55light blue1,100,060 .. 0,1500,05015 / 5,06black1,400,120 .. 0,4000,1005*) Note: If the control device is set for both the upper and lower response Pressure value, the difference between the setpoints of the upper and lower response Pressure (pso and psu) must be at least 10 % greater than the sum of the values specified for po and pu .pso - psu ( po + pu)**) The higher AG group is for the first half, the lower AG group is for the second half of the setting relief valve (sBv for Gas leaKaGes)setpoint springregulatingassemblyactuating Pressure ** in mmadjusting via pas (mbar)13,5RE 115+5 - 90+1513,5RE 215+523,630+1534,560+1523,6RE 315+1034,530+10** optional fixed setpoint value4 Gas Pressure Regulator rmG 361 Application, characteristics, technical data / Design and operationsafety relief valve (sBv for Gas leaKaGes)setpoint springregulating assemblyactuating Pressure ** diameter in mmadjusting via pas (mbar)13,5RE 115+5.

5 90+1513,5RE 215+523,630+1534,560+1523,6RE 315+1034,530+10** optional fixed setpoint valueversions (at option)- with leagage SBV for regulating assembly 1, 2, 3 (pa - regulating assembly 1 + 2 with safety diaphragm up to bar) - with respirator valve Type RMG 915 (SAV/RE)- with SAV maunal release - with noise reduction- with SAV electro-magnetic remote release - without SAV- with electric position indicator SAV closed by an inductive proximity switchdesign and operation (figure 1)The RMG 361 gas Pressure Regulator is designed to keep the outlet Pressure constant, irrespective of changes in the inlet Pressure and volumetric flowrate of the regulating line. It consists of the regulating device (1), valve (2), SAV safety shut-off valve (3), switching device (4), control device (5) and valve housing (6).The valve of the regulating device is Pressure compensated by means of a compensation diaphragm (7).

6 Diffe-rent valve sizes can be used for each nominal width. An optional SBV safety relief valve (9) can be fitted in the regulating outlet Pressure is fed via the measuring line to the measuring unit. This compares the actual value with the setpoint specified by the force applied by the setpoint spring (10). Any deviation from the setpoint will cause an adjustment in the valve (2) via the valve stem (11) so that the actual value is adjusted to the setpoint. The valve closes tight if there is zero with a safety diaphragm (13) have this positioned over the diaphragm (8). If this diaphragm (8) breaks, the safety diaphragm (13) presses against the diaphragm cover and prevents gas leaking into the foam metal cylinder (12) can be used in the actuator in order to reduce safety shut-off valve arranged on the inlet side shuts off the gas flow if the outlet Pressure deviates above or below the specified limit values.

7 In this case the measuring diaphragm (20) of the control device (5) is moved in such way that the balls (21) of the latch mechanism release the actuator stem (22). The spring force causes this to strike the release socket of the switching device (4), as a result of which the shaft (23) of the SAV shut-off val-ve (3) disengages and causes the SAV shut-off valve to close. The SAV shut-off valve can only be opened manu-ally. For this the outlet Pressure at the measuring point must be reduced below the upper response Pressure or increased above the lower response Pressure by at least the value of the re-engagement differential ( p).mounting, operation and maintenanceFor mounting and maintenance the DVGW worksheets G 490, G 491, G 495 and G 600 have to be considered as well as the general operating General Operating Instructions, Spare Parts gives full information about mounting, operation, maintenance and important spare gas Pressure Regulator should preferably be mounted in a horizontal position in the Pressure Regulator rmG 361 Design and operationwith safety diaphragmoutlet pressureinlet pressureatmospherewithout safety diaphragmbreathing linemeasuring line1381019711126243232120225measuring linebreathing line6 Gas Pressure Regulator rmG 361 Dimensions, weights, connectionsdimensionsDNABCDEFG weightregulating assemblyregulating assemblyregulating assemblyRE0RE1RE2RE3RE0RE1RE2RE3RE0RE1RE 2RE3(mm)(kg)

8 25184805240280355365------195296------27 20------50254*11475503603705103943326418 02981408365330570---595590225---52565--- 6090100352160100727570100*) face to face dimension 250 mm at optionconnections of measurinG lines and vent linesactuatorsav-Kontrollger tmeasuring linevent linemeasuring line and vent lineconnection** for:connection** for:connection** for:RE 0DN 25/50pipe 12 x 1,5 (thread M16 x 1,5)pipe 12 x 1,5DN 80/100pipe 16 x 2 (thread M22 x 1,5)(thread M16 x 1,5)RE 1pipe 12 x 1,5 (thread M16 x 1,5)pipe 12 x 1,5 (thread M16 x 1,5)RE 2DN 25/50pipe 12 x 1,5 (thread M12 x 2)pipe 12 x 1,5 (thread R 1/2 )DN 80/100pipe 16 x 2 (thread 16 x 2)RE 3pipe 16 x 2 (thread M22 x 1,5)** screw connection without brazing with compression joint according to DIN 2353 connecting elements: DN 25: screw bolt M 12 x 50 DIN ; nut M12 DIN 934-5 DN 50 bis 100: screw bolt M16 x 60 DIN ; nut M16 DIN 934-57 Gas Pressure Regulator rmG 361 Type descriptionexample:RMG 361 - 50 - K1a / E1 / HA / F - 31 / 1L / 3 - SosizeDN 2525DN 5050DN 8080DN 100100ssv control devicesetting range in barWhoWhuK1a0,05.

9 1,500,01 .. 0,12K1aK2a0,04 .. 5,000,06 .. 0,40K2aelectr. maGnet. remote actuationelectromagneticremote actuationactuation withenergizationE1 / E2manual releasemanual actuation with push button valve RMG 912 HAremote transmissionelectrical remote transmission of valve position closed FreGulator deviceDNdiaphragm assemblyvalveSBV blockedwith SBVwith safety diaphragmvalve 02531------25310RE 03150------31500RE 06080------60800RE 06080100------60801000RE sprinGsetpoint springadjustment range in 0RE 1/RE 2RE 30black/blue0,020 .. 0,03001grey0,025 .. 0,0500,020 .. 0,03012yellow0,045 .. 0,1000,020 .. 0,05023brown0,090 .. 0,2000,045 .. 0,10034bright red0,150 .. 0,3000,075 .. 0,10045dark red0,250 .. 0,4000,075 .. 0,15056light blue0,350 .. 0,5000,125 .. 0,20067white1,0 .. 2,50,450 .. 0,6000,175 .. 0,25078green2,0 .. 4,00,550 .. 0,80089black0,650 .. 1,0009typesize DNSSV control deviceelectromagnetic remote actuationmanual releaseelectrical remote transmission of valve position valve seat diameterregulator devicesetpoint springspecial version (to be specified in detail)For More informationTo learn more about RMG s Advanced GasSolutions, contact your RMGaccount manager or Process solutionsRMG Regel + Messtechnik GmbHOsterholzstrasse 4534123 Kassel, GermanyTel: +49 (0)561 5007-0 Fax: +49 (0)561 5007-107 Honeywell Process solutionsRMG Messtechnik GmbHOtto-Hahn-Strasse 535510 Butzbach, GermanyTel: +49 (0)6033 897-0 Fax: +49 (0)6033 897-130 Honeywell Process solutionsRMG Gaselan Regel + Messtechnik GmbHJulius-Pintsch-Ring 315517 F rstenwalde, GermanyTel: +49 (0)3361 356-60 Fax: +49 (0)3361 356-836 Honeywell Process solutionsW GA W rme-Gastechnik GmbHOsterholzstrasse 4534123 Kassel, GermanyTel: +49 (0)561 5007-0 Fax.

10 +49 (0)561 5007-207 POLANDH oneywell Process solutionsGazomet Sp. z Sarnowska 263-900 Rawicz, PolandTel: +48 (0)65 5462401 Fax: +48 (0)65 5462408 ENGLANDH oneywell Process solutionsBryan Donkin RMG Gas Controls Drive, HolmewoodChesterfield S42 5UZ, EnglandTel: +44 (0)1246 501-501 Fax: +44 (0)1246 501-500 CANADAH oneywell Process solutionsBryan Donkin RMG Canada Clarke Street South, WoodstockOntario N4S 0A8, CanadaTel: +1 (0)519 5398531 Fax: +1 (0)519 5373339 UsAHoneywell Process solutionsMercury Instruments LLC3940 Virginia AvenueCincinnati, Ohio 45227, USATel: +1 (0)513 272-1111 Fax: +1 (0)513 272-0211 TURKEYH oneywell Process solutionsRMG GAZ KONT. SIS. ITH. IHR. LTD. Sanayi Sitesi, 62. Sokak No: 7-8-9-10TR - Sasmaz / Ankara, TurkeyTel: +90 (0)312 27810-80 Fax: +90 (0)312 27828-23 RMG 2010 Honeywell International Inc.