THE WIDEST RANGE IN MINIATURE SWITCHES A - Atakel

1 SeriesToggle switchesDistinctive featuresTHE WIDEST RANGE IN MINIATURE SWITCHES 17 actuators including toggles , paddle levers and locking levers in different lengths. Various contact materials for low and high currents. 8 functions including maintained and momentary versions. 1 to 4 pole configurations. 12 terminal types including 9 for PC board types include quick-connect and wire-wrap. 6 bushing styles from 6 (.236) plain to 11,9 (15/32) threaded. 3 types of finish including military black. 3 approvals (UL - CSA - CECC). 4 types of sealing for terminal or front panel requirements. Numerous accessories available for actuator and bushing options. 05-Serie 5000-A-structure_05-Serie 5000-A-structure 21/11/12 12:05 Page215 SERIEST erminals and bushing0 Straight PC terminals, 5,08 (.200) terminal spacing, with 6,35 (1/4)threaded bushing1 Straight PC or quick-connect terminals, 4,70 (.)

2 185) terminal spacing, with 6(.236) threaded PC terminals, 4,70 (.185) terminalspacing, right angle, quick-connect or wire wrap terminals, with 6,35 (1/4)threaded bushing3 Straight PC terminals, 4 (.157) terminal spacing, with 6(.236) threaded bushing4 Straight PC terminals, 4 (.157) terminal spacing or right angle terminals , with 6,35 (1/4)threaded bushing5 Solder lug terminals, with 6 (.236)threaded lug terminals, with 6,35 (1/4) or 11,9 (15/32)threaded lug terminals, with 6,35 (1/4) PC or quick-connect terminals,with 6,35 (1/4) flattedbushing, 4,70 (.185) terminal of poles3 Single pole4 Double pole5 Three pole6 Four poleElectrical functions6ON-ON9 ONOFFON7 MOM OFFMOM8 ONOFFMOM2ON-MOM4 ONONONONON MOM MOM ON MOM Function 4 Must not have blank in"connections" Must not have blank in"momentary" forfunction 4 THStandardCTReversedSee wiring diagrams end For functions 4, 4-1R, 4-2R(leave blank for all otherfunctions).

3 Momentary forfunction 41 RONON MOM2 RMOM ON MOML eave blank for lugs or straight PC depending on modelMSolder lugs with 11,9 (15/32) bushing (5600 SWITCHES )MIWRWire wrap (for 5200 SWITCHES only)WRight angle, horizontal mounting (5200 - 5400 SWITCHES )WWRight angle, vertical mounting (5200 - 5400 SWITCHES )Y]Y4] Bracket mounting (5200 SWITCHES )Y6]Y7]ZQuick connect (5200 - 5100 - 5900 SWITCHES )ABOUT THIS SERIESOn the following pages, you will find successively :- model structure of SWITCHES with threaded bushing - model structure of SWITCHES with plain bushing- options in the same order as in above chartDimensions: first dimensions are in mm while inches are shown as bracketed : please note that not all combinations of above numbers are to the following pages for further seriesToggle switchesOverview05-Serie 5000-A-structure_05-Serie 5000-A-structure 18/12/12 14:55 seriesToggle switchesOverviewSealing bootsare available.

4 They are presented in section accessories : standard hardware supplied with all models with 6,35 (1/4) or 6 (.236) threaded bushing :2 hex nuts 8 mm (.314) across flats, 1 locking ring and 1 and special hardware available are presented in section unit: 25 pieces or 50 pieces depending on chrome finishGBlack finish on bushing, actuator tipBlankNone038 White fluorescent tip to leverAvailable with matt blackfinish (G) optionsBlank No special requirementX408 Front panel sealing by two O-ringsX404 Horizontal right angle with reduced overall dimensionsOther : specific bushingheight, PC terminal length,finish, ratings, Seefollowing and paddlesCapsLengthU27011 (.433)U17107,3 (.287)PaddlesU240N12,4 (.488)U290N20 (.787)U390N21,5 (.846)Contact materialsASilverADSilver, gold platedCDBrass, gold platedFor peak currents, see X814,under Special sealing except where standardBEpoxy sealed terminalsKFront panel sealing by one O-ring and sealing washerSealing by two O-rings, seeX408 under "Specialoptions".

5 LeversLength with threadedplainbushingbushingBlank (std)10,5 (.413)13,5 (.531)-216 (.629)19 (.748)-7-6,6 (.259)-8 (flat)21,3 (.838)--9 (flat)11,4 (.448)--12 (flat)6,3 (.248)--165,5 (.216)8,5 (.334)-177 (.275)10 (.393)-21 (+ U640)21,3 (.838)-insulated-2221,3 (.838)--2314 (.551)-Blank(large) 17,5 (.688) --2516,30 (.642)-27(large)11,7 (.460) --4N9 (.354)12 (.472)4N for use with paddle actuators :Consult factory for details ofapproved levers-1V1 locked position-2V2 locked positions-3V3 locked positionsOther, consult models with 6,35 (1/4) 5000-A-structure_05-Serie 5000-A-structure 18/12/12 14:55 Page23A-24 APEM seriesToggle switchesSpecificationsMATERIALS Case : diallylphthalate (DAP) or high temperature plastic material(UL94-V0) Actuator : brass, nickel plated Paddles : UL94HB polyamide Lever caps : vinyl Bushing : brass, nickel plated Housing : stainless steel or steel tin plated ContactsA: silverAD: silver, gold platedCD: brass, gold platedX814: for peak currrents, see Special options.

6 Terminal seal : epoxyELECTRICAL SPECIFICATIONS Current/voltage rating with resistive load :ContactMaximumMinimumLevel*Silver (A)4A 30 VDC50mA 10 VDCIII and IVSilver,4A 30 VDC10mA 50mVI to IVgold plated (AD)Gold plating withstands up to 100mA 30 VDC10 A 5 VBrass,0,4 VA at 20 VAC or DC10mA 50mVI and IIgold plated (CD) 10 A 5V For inductive, lamp or capacitive load, consult factory. * For details, see Technical Information, end of catalogue. Initial contact resistance : 10 m max. Insulation resistance : M min. at 500 VDC Dielectric strength Vrms 50 Hz min. between Vrms 50 Hz min. between Vrms 50 Hz min. between terminals and frame Contact bounce : 2 ms max. Electrical life at full load cycles for single and double cycles for 3 cycles for 4 pole Low level or mechanical life : cyclesGENERAL SPECIFICATIONS Torque : 1,25 Nm (.922 ) max. applied to nut Panel thickness : 2,5 mm (.)

7 098) with 2 nuts - 4 mm (.157) with 1 nut Operating temperature : -40 C to +85 CAGENCY APPROVALS/PREFERENTIAL LIST3A 250 VAC, 6A 125 VACFor VDE, refer to 55000 : consult factory for details of approved : to order SWITCHES marked UL, CSA or CECC, complete appropriatebox of ordering format. The preferential list does not appear on the 96201-00705-Serie 5000-A-structure_05-Serie 5000-A-structure 18/12/12 14:55 seriesToggle SWITCHES - solder lug terminalsThreaded bushing 6,35 (1/4) : 5600 Single poleDouble poleThree poleMODELSTRUCTUREIIIIII2-31-25636ON-ON5 639 ONOFFON5637 MOM OFF MOM5638 ONOFF MOM5632ON- MOMIIIIII2-31-25-64-55646ON-ON5649 ONOFFON5647 MOM OFF MOM5648 ONOFF MOM5642ON- MOM5644*ONONON5644 1R*ONON MOM5644 2R*MOM ON MOMIIIIII2-31-25-64-58-97-85656ON-ON5659 ONOFFON5657 MOM OFF MOM5658 ONOFF MOM5652ON- MOM 1, 2, 3 and 4 pole configurationsShown with standard lever Keyway Keyway Keyway* Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.

8 Keyway1 2 3(.070)(.043)(.145)(.074) (.039) (.413)(.314) (.031) (.019) (.118 DIA) (.070) (.519) (.275)(.185) (.472) (.145) (1/4-40 UNS) (.519)24 (.118 DIA) (.070)(.187) (.185) (.031) (.314)(.413) (.145) (.019) (.472) (.039) (1/4-40 UNS)(.472) (.519) (.118 DIA) (.070) (.413)(.314) (.039) (.019) (.031) (.145) (.516) (1/4-40 UNS) (.649) (.187) (.185) 5000-A-structure_05-Serie 5000-A-structure 21/11/12 12:06 Page25A-26 APEM seriesToggle SWITCHES - solder lug terminalsThreaded bushing 6,35 (1/4) : 5600 Four poleIIIIII2-31-25-64-58-97-811-1210-1156 66ON-ON5669 ONOFFON5667 MOM OFF MOM5668 ONOFF MOM5662ON- MOM5664*ONONON5664 1R*ONON MOM5664 2R*MOM ON MOM*Function 4 : DP in 4P case - specify CT or TH connections, see end of CUT-OUTWith KWith X408 Standardsealing optionsealing option (.519)(.070)(.118 DIA) (.145) (.031) (.019) (.516) (.039) (.314)(.413) (1/4-40 UNS) (.)

9 834) (.187) (.185)121110789(.204)(.255 DIA)(.086 DIA)(.043)(.106) (.255 DIA) (.255 DIA) (.106)05-Serie 5000-A-structure_05-Serie 5000-A-structure 21/11/12 12:06 seriesToggle SWITCHES - solder lug terminals5700 models Flatted bushing 6,35 mm (1/4) 1, 2, 3 and 4 pole configurationsFor model structure numbers, refer to5600models and replace 6 with CUT-OUTS tandard or with Ksealing optionDiagram as per 5600 modelMODELSTRUCTURE5500 models Threaded bushing 6 mm x SI (.236 x IS) 1, 2, 3 and 4 pole configurationsDiagram as per 5600 modelPANEL CUT-OUTS tandardWith X408sealing optionFor model structure numbers, refer to5600models and replace 6 with (.106) (.255 DIA) (.244 DIA)(.100)(.244) (.086 DIA) (.244 DIA)05-Serie 5000-A-structure_05-Serie 5000-A-structure 21/11/12 12:06 Page27A-28 APEM seriesToggle SWITCHES - solder lug terminalsThreaded bushing 11,9 (15/32) : 5600 MSingle poleDouble poleThree pole 1, 2, 3 and 4 pole configurations Supplied with 2 hex nuts and 1 locking ring Panel thickness up to 6 mm (.

10 236)IIIIII2-31-25636 MON-ON5639 MONOFFON5637 MMOM OFF MOM5638 MONOFF MOM5632 MON- MOMIIIIII2-31-25-64-55646 MON-ON5649 MONOFFON5647 MMOM OFF MOM5648 MONOFF MOM5642 MON- MOM5644M*ONONON5644M 1R*ONON MOM5644M 2R*MOM ON MOMIIIIII2-31-25-64-58-97-85656 MON-ON5659 MONOFFON5657 MMOM OFF MOM5658 MONOFF MOM5652 MON- MOMMODELSTRUCTURES hown with standard lever* Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue. Keyway Keyway Keyway Keyway1 2 3(.070)(.043)(.145)(.074) (.031) (.019) (.070) (.185) (.145) (.433)(.468)(.688)(.196 DIA)(15/32-32 UNS) (.519)(.275) (.070)(.187) (.185) (.688)(.468)(.433)24 (.145) (.019) (.031)(.519) (.472) (15/32-32 UNS)(.196 DIA)IIIIII123654(.070) (.019) (.031) (.145) (.187) (.468)(.688) (.476) (.649) (15/32-32 UNS)(.196 DIA) (.519)789(.185) 5000-A-structure_05-Serie 5000-A-structure 21/11/12 12:06 seriesToggle SWITCHES - solder lug terminalsThreaded bushing 11,9 (15/32) : 5600 MFour poleIIIIII2-31-25-64-58-97-811-1210-1156 66 MON-ON5669 MONOFFON5667 MMOM OFF MOM5668 MONOFF MOM5662 MON- MOM5664M*ONONON5664M 1R*ONON MOM5664M 2R*MOM ON MOMPANEL CUT-OUTS tandardWith Ksealing option*Function 4 : DP in 4P case - specify CT or TH connections, see end of catalogue.