Clevis Pipe Hangers, Supports and Accessories

1 158 Product overview 2017We reserve the right to change designs and technical specifications of our pipe Hangers, Supports and AccessoriesA comprehensive range of pipe hangers, Supports and Accessories , many of which are UL Listed and have FM approval. Most products in this range comply with MSS SP-58 and SP-69 and A-A-1192 A. Please enquire about items that are not specifi cally shown in this HangersProduct overview 2017We reserve the right to change designs and technical specifications of our pipe Hangers, Supports and AccessoriesA comprehensive range of pipe hangers, Supports and Accessories , many of which are UL Listed and have FM approval. Most products in this range comply with MSS SP-58 and SP-69 and A-A-1192 A.

2 Please enquire about items that are not specifi cally shown in this overview 2017We reserve the right to change designs and technical specifications of our Coating Electroplated Zinc (ASTM B633) This type of coating is recommended for indoor use in relatively dry areas. This process deposits a coating of zinc on the steel or iron by electrolysis from a bath of zinc salts. This coating is pure zinc and adheres to the steel or iron with a molecular bond. A maximum of 12 m of zinc can be applied using this method. Pre-Galvanized Zinc (ASTM A653)This type of coating is suitable for extended exposure in dry or mildly corrosive atmospheres, but not generally recommended for outdoor use, or in industrial environments.

3 This coating is also referred to as mill galvanized or hot dip mill galvanized . This process continuously rolls steel coils or sheets through molten zinc. The steel is then cut or slit to size. Coating thickness of .90 ounces per square foot of steel surface (referred to as G90) is used on Flamco s Figures 310G and 310 NFPA. Cut edges are not zinc coated, however, zinc near the uncoated steel becomes a sacrificial anode, which protects the bare areas after a short period of time. Hot Dip Galvanized (ASTM 123)This type of coating provides extended corrosion protection for steel and iron products exposed to extreme humidity commonly evident in outdoor exposure or in uncontrolled atmospheric conditions.

4 This coating provides superior corrosion resistance to that of electroplating. The process calls for the steel or iron product to be completely immersed into a bath of molten zinc, which creates a metallurgical bond. The minimum coating thickness is ounces per square foot per side (3 ounces per square foot of steel or iron). Caution should be taken when specifying Hot Dip Galvanizing on certain products. Products with threaded components should either have the threads protected from the galvanizing process or chase the threads subsequent to hot dipping. Products with critical size tolerances should account for the thickness of the FinishesPrimer Flamco offers Red Primer and Yellow Primer.

5 Both offer a degree of protection from the elements. These coatings are also used in applications where painting of the metal is desired. EPA is restricting the use of certain primers. Consult Flamco for specific primer chemical components, as well as corrosive capabilities of specific CoatingVinyl coating of the metal prevents galvanic reaction between dissimilar metals, provides corrosion resistance, reduces noise, and can be used where glass or plastic pipe contact with metal is not CoatingFlamco offers various epoxy finish es in both commercial and military grades. These finishes offer a high degree of corrosion resistance. Flamco provides COPPER-GARD finish for copper tubing installations.

6 The finish provides superior corrosion protection and insulates against dissimilar metal contact, thus preventing electrolysis. The process applies a baked-on epoxy paint to steel stampings and iron castings. In the three step process, the parts are zinc plated to .0002 thick, an epoxy copper colored powder is then applied by an electrostatic method, and finally, the coated parts are baked at 180 for 20 PlatingThis coating is designed for copper tubing installations. The coating is intended to identify the product size only. This finish is not intended for corrosion PlatingThis coating is intended to support chrome plated pipe and provides corrosion resistance for commercial installations such as hospitals, schools and can offer alternative coatings for all products detailed in this chapter such as plastic, red and yellow oxide primer, epoxy, hot dip galvanized, electro zinc, copper, COPPER-GARD, chrome and colour coordinated finishes.

7 Specialized finishes may be available upon HangersProduct overview 2017We reserve the right to change designs and technical specifications of our HANGERSCH - G Clevis HangersType 11 Standard, adjustable Clevis hangers. Material: Carbon steel *. Finish: Electro-galvanized *. Service: Designed for the suspension of non-insulated, stationary pipe lines. Approvals: - listed (sizes 21/2" - 8") FM approved (3/4" - 8"). Complies with: Federal Specification WW-H-171-E (Type# 1), A-A-1192 A (Type# 1) Manufacturers Standardization Society MSS SP-58 and SP-69 (Type# 1). Notes: Upper locknut must be tightened securely to assure proper hanger performance.

8 Stainless steel hangers are recommended for applications where protection from corrosive environments is PipeMaterial sizeDimensionsMax. rec. working load[lbs]Weight[lbs]OrderCodeNom.["]OD[" ]To p["]Bottom["]Bolt["]A["]B["]C["]E **["]F["]CH-G 1/21 x 7/813ga x 7/81/43/8 1 11/16 2 1/1615/167/16 3/43 x 7/813ga x 7/81/43/8 1 11/16 2 9/1615/167/16 x 7/813ga x 7/81/43/8 2 1/16 2 11/161 1/45/8 1 1/41 1 x 7/813ga x 7/81/43/8 2 1/2 3 3/161 11/167/8 1 1/21 1 x 7/812ga x 7/81/43/8 2 7/8 3 11/162 1/161 1/16 x 7/812ga x 7/81/43/8 3 5/16 4 7/162 1/21 1/4 2 1/22 1 x 1 3/1610ga x 1 3/165/161/2 4 1/2 5 7/83 3/81 15 x 1 3/1610ga x 1 3/165/161/2 4 3/4 6 1/23 11/161 3 3 1/23 1 x 1 3/1610ga x 1 3/165/161/2 5 7/8 7 15/164 13/162 9 4 x 1 3/1610ga x 1 3/163/85/8 5 15/16 8 3/164 9/162 1 5 x 1 1/48ga x 1 1/41/25/8 5

9 11/16 8 7/164 5/161 7 6 x 1 1/28ga x 1 1/21/23/4 6 13/16 10 1/85 3/161 3 7 x 1 1/28ga x 1 1/21/23/4 7 13/16 11 5/86 3 8 x 1 3/48ga x 1 3/45/83/4 8 1/16 12 7/166 1/41 7 x 1 3/43ga x 1 3/43/47/8 10 15 7/1682 1 x 23ga x 23/47/8 11 9/16 189 9/162 13 1414 x 2 1/21/4 x 27/81 12 9/16 19 9/1610 9/162 9 x 2 1/21/4 x 2 1/211 13 15/16 21 15/1611 15/162 13 x 31/4 x 2 1/211 16 2513 7/83 3 x 33/8 x 31 1/41 1/4 17 1/2 27 1/215 1/83 3 2424 x 33/8 x 31 1/41 1/4 19 3/4 31 3/417 3 x 33/8 x 31 1/41 1/4 24 1/8 39 1/821 1/24 3 * Material 304 and 316 stainless steel and finishes such as plain, painted or hot dip galvanized are available upon request.

10 ** E dimension includes exposed rod threads beyond bottom of the hex nut. Exposed rod thread dimension is equal to the diameter of the rod overview 2017We reserve the right to change designs and technical specifications of our - E Clevis HangersType 11xClevis hangers with extended bottom. Material: Carbon steel. Finish: Electro-galvanized *. Service: Designed for the suspension of non-insulated, stationary pipe lines. The bottom section of the hanger is elongated to allow for easier installation of insulation. Complies with: Federal Specifications WW-H-171-E (Type# 1), A-A-1192 A (Type# 1) Manufacturers Standardization Society MSS SP-58 and SP-69 (Type# 1).