GPS Tracker Command list - GPS Nyomkövető autóba ...

1 GPS Tracker Command list 123456=Default password. Represents a space Set success equipment reply OK . Command spell wrong will no reply. All the Command not case sensitive Adapt to the mode ls TK102 TK103-2 TK102-2 TK106 Anywhere TK103-2 TK102-2 Anywhere After authorized, the authorized mobile phone not need input password Note the Space, anytime please send Command correctly Function For example Explain 01 Change password password123456 ** * is the new password 02 Authorization admin123456 ** ** *is phone number can set 5 authorized phone number.

2 If set space, means relieve authorized 03 Monitor monitor123456 Monitor the target tracker123456 Cancel monitor, Restore positioning mode 04 Successive positioning t030s005n123456 Every 30s positioning 5 times t020h**n123456 Every 20h positioning countless times; S=second, m=minute h=hour n=time t030s000n123456 Parameter 0 is for closing successive post ioning 05 Geo-fence stockade123456 , ; , Rectangle fence, the longitude & latitude in top left corner and buttom right corner, pay attention distinguish .parameter blank space is for cancel. 06 Movement alert move123456 200 radius 200M circle with the center of equipment set means cancel 07 Over speed alert speed123456 080 080 means 80km/h set means cancel 08 SMS replying mode smslink123456 Google link Recover the data format: begin 09 one time positioning smslinkone123456 Reply one time positioning data 10 Low battery alert low123456 battery low to ,30 minutes once to alert until power off 11 Time sitting time123456 zone 8 UTC time 8=+8 hours -6.

3 30 12 APN sitting apn123456 cmnet User name password such as China Mobile apn123456cmnet Needn t to fill in if there isn t user and password APN set means cancel 13 IP PO RT sitting adminip123456 00 2337 Fill in standard IP PORT 7070=PORT set means cancel 14 UDP/TCP gprsmode123456 0 0=TCP 1=UDP default 0 When setting ,restart , it will executive 15 Check Parameter status123456 imei=861785004780965,speed=0,bat=100%,ch arging=1,gps=L,csq=17,ip= :2337,apn=cmnet,T(s)=30,TL(m)=0,time=8,s hake=0,mode= Tracker 16 Factory reset begin123456 Delet all the parameter 17 Check the version Version123456 JEO-108 version 18 Super Command Format Don t need password format system Adapt to the model TK103-2 TK102-2 TK106 Anywhere 19 GPRS uploading format 123456gprsdata 0 0=have base station and mileage data 1=don t have it 20 Distance limit sending 123456 Tlimit 100 GPRS data uploading, less than 100m it not uploading data to platform 21 Traffic model 123456traffic 5 1 stand for lowest sensibility level.

4 10 is the highest sensibility lever 0 is for closing this function 22 Shake sensor 123456shake 5 1 stand for lowest sensibility level ,10 is the highest sensibility lever 0 is for closing this function 23 the format of Reply message 123456smslink hook up to Google 123456smstext Data format 24 upgrade Remote (TK106 do not support it) 123456ldu,server= ,en=72 Upgrade Command of the on-board equipment system above version can be used 123456ldu,server= ,en=72 upgrade Command of Hand-held devices system above version can be used 25 Set alerts receiving number when it is low electricity 123456batt 13800138000 Set alarm receiving number, when it is low electricity.

5 It will send a message to the authorization number without this setting. 26 Mileage calculation 123456km0 begin to calculate 123456km? Inquires the calculation results A) if there are breakpoints data saved in SD card , they will be automatic first upload without setting when GPRS is recovery. B) the Tracker must be installed with the SD card and be set APN if you want to remote upgrade. The adapting model: TK103-2 27 Cut off oil 123456powercar 11 When the parameters "11"is changed to "00" ,it mean to oil recovery. 28 Fortify/No fortify. Call the Tracker : fortify. Call again: no fortify. When in fortify model, ACC line connected, will alarm. 29 Check fortified model 123456fortified ortifying or no fortify Include position date.

6 A) A/B sim car can switch automatically, not need to set. b) When in fortify model, all the alarm will send to authorized mobile phone and platform. c) The white line need to connect the speakers positive wires of the car alarm system. When car alarm more than 10 seconds, the authorized mobile will received the alarm sms. d) Low power alarm will automatically send to authorized mobile phone, do not need to set. e) Connect ACC line, when in fortify model, if the ACC line be connected, will send alarm to authorized mobile phone. f) All the model trackers need set below Command if want transfer date to online platform. A set APN B: set IP PORT C: set Successive positioning Command Chinese Platform English Platform The steps of first time set up by mobile phone A.

7 The GPS Tracker which installed the SIM cardput it in the then call it,will receive the positioning information by message about a minute storage the IMEI number which appeared in the message. B. According to message numbers in the form, send the messages ( Tracker ;16/ Tracker ;12/ Tracker ;13/tracke r;04) one by one, when recevied the reply "ok", then go next. C. open the server website, please input user name and password (retailer offers) ,and then can vehicle monitoring.