83 Tees 6061-T6 Aluminum Association AMS QQ-A-200/16, ASTM B308, ASTM B221, AMS 4150 25' Lengths A (Inches) B (Inches) T (Inches) Approx WT. Per FT. Approx WT.
Beam Clamps Beam Clamps Material: Steel Function: Recommended for the suspending of hanger rod from the center of an I-beam, equally distributing the load on both sides of the beam. Use with B3210 eye rod, B3211 welded eye rod
Limited Warranty Products manufactured by TFBP are warranted solely to the original Buyer for ten (10) years against defects in material and workmanship when paid for and properly installed and maintained under normal use and service.
Introduction This section includes an introduction to documents for this product and other document-related instructions. About documentation This document contains instructions for a trained installer to properly install, configure, and
FABRICATED SLIDE GATES 7 Specifications for Aluminum Slide Gates General Slide and weir gates including lifts, stems and accessories, shall be of the size and type shown on the drawings and specified