0859 Solid State Relays data sheet - Farnell element14

1 Solid - State RelaysOpto 22 43044 Business Park Drive Temecula, CA 92590-3614 800-321-6786 951-695-3000 FAX 951-695-3095 SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 2006 2007 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or G E1 DATA SHEETForm 0859-070316 Solid - State Relays * UL recognition is pending for Power Series SSRs with LED Opto 22 Product Support for current UL 22 Power Series SSRF eaturesRugged, epoxy encapsulation construction4,000 volts of optical isolationSubjected to full load test and six times the rated current surge before and after encapsulationUnique heat-spreader technologyUL and CSA recognized*OverviewIn 1974, Opto 22 introduced the first liquid epoxy-filled line of power Solid - State Relays (SSR).

2 This innovation in SSR design greatly improved the reliability and reduced the cost of manufacturing. At that time, we also incorporated into our manufacturing process 100% testing under full load conditions of every relay we 1978, Opto 22 had gained such a reputation for reliability that we were recognized as the world s leading manufacturer of Solid - State Relays . Through continuous manufacturing improvements and the same 100% testing policy established over 30 years ago, Opto 22 is still recognized today for the very high quality and reliability of all our Solid - State 22 offers a complete line of SSRs, from the rugged 120/240/380-volt AC Series to the small footprint MP Series, designed for mounting on printed circuit boards.

3 All Opto 22 SSRs feature 4,000 volts of optical isolation and are UL and CSA recognized.* The innovative use of room-temperature liquid epoxy encapsulation, coupled with Opto 22 s unique heat-spreader technology, are key to mass producing the world s most reliable Solid State Relays . Every Opto 22 Solid State relay is subjected to full load test and six times the rated current surge both before and after encapsulation. This double testing of every part before it leaves the factory means you can rely on Opto 22 Solid State Relays . All Opto 22 SSRs are guaranteed for NumbersPartDescription120A10120 VAC, 10 Amp, AC Control120A25120 VAC, 25 Amp, AC Control240A10240 VAC, 10 Amp, AC Control240A25240 VAC, 25 Amp, AC Control240A45240 VAC, 45 Amp, AC Control120D3120 VAC, 3 Amp, DC Control120D10120 VAC, 10 Amp, DC Control120D25120 VAC, 25 Amp, DC Control120D45120 VAC, 45 Amp, DC Control240D3240 VAC, 3 Amp, DC Control240D10240 VAC, 10 Amp, DC Control240Di10240 VAC, 10 Amp, DC Control, with LED Indicators240D25240 VAC, 25 Amp, DC Control240Di25240 VAC, 25 Amp, DC Control, with LED Indicators240D45240 VAC, 45 Amp, DC Control240Di45240 VAC, 45 Amp, DC Control, with LED Indicators380D25380 VAC, 25 Amp, DC Control380D45380 VAC, 45 Amp.

4 DC ControlPartDescription480D10-12480 VAC, 10 Amp, DC Control, Transient Proof480D15-12480 VAC, 15 Amp, DC Control, Transient Proof480D25-12480 VAC, 25 Amp, DC Control, Transient Proof480D45-12480 VAC, 45 Amp, DC Control, Transient Proof575D15-12575 VAC, 15 Amp, DC Control, Transient Proof575D45-12575 VAC, 45 Amp, DC Control, Transient Proof575Di45-12575 VAC, 45 Amp, DC Control, Transient Proof, with LED IndicatorsZ120D10Z Model, 120 VAC, 10 Amp, DC ControlZ240D10Z Model, 240 VAC, 10 Amp, DC ControlMP120D2 or P120D2120 VAC, 2 Amp, DC model is low or P120D4120 VAC, 4 Amp, DC Control. P model is low or P240D2240 VAC, 2 Amp, DC. P model is low or P240D4240 VAC, 4 Amp, DC. P model is low VAC, 4 Amp, DCSolid- State RelaysOpto 22 43044 Business Park Drive Temecula, CA 92590-3614 800-321-6786 951-695-3000 FAX 951-695-3095 SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 2006 2007 Opto 22.

5 All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or RelaysPA G E2 DATA SHEETForm 0859-070316 Power Series SSRsOpto 22 provides a full range of Power Series Relays with a wide variety of voltage (120 575 volts) and current options (3 45 amps). All Power Series Relays feature 4,000 volts of optical isolation and have a high PRV rating. Some Power Series Relays include built-in LEDs to indicate SeriesThe DC Series delivers isolated DC control to large OEM customers SeriesThe AC Series offers the ultimate in Solid State reliability. All AC Power Series Relays feature a built-in snubber and zero voltage turn on.

6 Transient-proof models offer self protection for noisy electrical Series SSRsThe Z Series employs a unique heat transfer system that makes it possible for Opto 22 to deliver a low-cost, 10-amp, Solid State relay in an all-plastic case. The push-on, tool-free quick-connect terminals make the Z Series ideal for high-volume OEM Circuit Series SSRsOpto 22 s Printed Circuit Series allows OEMs to easily deploy Solid State Relays on printed circuit boards. Two unique packages are available, both of which will switch loads up to four SeriesThe MP Series packaging is designed with a minimum footprint to allow maximum relay density on the printed circuit SeriesThe P Series power Relays provide low-profile [ in.]

7 ( mm)] center mounting on printed circuit (all Power Series models) 4,000 V optical isolation, input to output Zero voltage turn-on Turn-on time: cycle maximum Turn-off time: cycle maximum Operating frequency: 25 to 65 Hz (operates at 400 Hz with six times off- State leakage) Coupling capacitance, input to output: 8 pF maximum Hermetically sealed DV/DT Off- State : 200 volts per microsecond DV/DT commutating: snubbed for rated current at power factor UL recognized* CSA certified CE componentSee Opto 22 form #986 for torque Cover for Power Series SSRsA plastic safety cover (Opto 22 part number SAFETY COVER) is optionally available for Opto 22 Power Series SSRs. The safety cover reduces the chance of accidental contact with relay terminals, while providing access holes for test instrumentation.

8 * UL recognition is pending for Power Series SSRs with LED Opto 22 Product Support for current UL optional plastic safety cover can be installed on a Power Series RelaysOpto 22 43044 Business Park Drive Temecula, CA 92590-3614 800-321-6786 951-695-3000 FAX 951-695-3095 SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 2006 2007 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or RelaysDATA SHEETForm 0859-070316PA G E3AC Power Series Specifications Opto 22 provides a full range of Power Series Relays with a wide variety of voltage (120 575) and current options (3 45 amps).

9 All Power Series Relays feature 4,000 volts of optical isolation and have a high PRV VoltModelNumberNominalAC LineVo l t ag eNominalCurrentRating(Amps)1 cycleSurge(Amps)PeakNominalSignal InputResistance(Ohms)SignalPick-upVo l t a g eSignalDrop-outVo l t a g ePeakRepetitiveVo l t ag eMaximumMaximumOutputVo l t ag eDropOff- State Leakage(mA)Maximum**OperatingVo l t ag eRange(Volts AC)I2tRatingt= (ms)IsolationVo l t ag e jc*( C/Watt)Dissipation(Watts/Amp)120D3120385 10003 VDC(32V allowed)1 140304, (32V allowed)1 volts7 mA12 140504, (32V allowed)1 volts7 mA12 1402504, (32V allowed)1 volts7 mA12 14017504, (32V allowed)1 volts5 mA24 280304, (32V allowed)1 volts14 mA24 280504, (32V allowed)1 volts14 mA24 280504, (32V allowed)1 volts14 mA24 2802504, (32V allowed)1 volts14 mA24 2802504, (32V allowed)1 volts14 mA24 28017504, (32V allowed)1 volts14 mA24 28017504, (32V allowed)1 volts12 mA24 4202504, (32V allowed)1 volts12 mA24 42017504, (280V allowed)10 volts7 mA12 140504, (280V allowed)10 volts7 mA12 1402504, (280V allowed)10 volts14 mA24 280504, (280V allowed)10 volts14 mA24 2802504, (280V allowed)10 volts14 mA24 28017504, : jc* = Thermal resistance junction to base.

10 Maximum junction temperature is 110 C.** Operating Frequency: 25 to 65 Hz (operates at 400 Hz with 6 times the offstate leakage) Solid - State RelaysOpto 22 43044 Business Park Drive Temecula, CA 92590-3614 800-321-6786 951-695-3000 FAX 951-695-3095 SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 2006 2007 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or RelaysPA G E4 DATA SHEETForm 0859-070316AC Power Series Specifications 120/240/380 Volt (cont.)Surge Current DataThermal RatingsDimensional DrawingsTime(Seconds)Time*(Cycles) : *60 RelaysOpto 22 43044 Business Park Drive Temecula, CA 92590-3614 800-321-6786 951-695-3000 FAX 951-695-3095 SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 2006 2007 Opto 22.