Page 1/6 Safety data sheet according to 1907/2006/EC ...

1 Page 1/7 Safety data sheetaccording to 1907/2006/EC , Article 31 / ISO 11014 Printing date : number 1: Identification of the substance/mixture and of the company/undertaking Product identifier Trade name:Hilti HIT-HY 150 MAX Container size330 ml, 500 ml, 1400 ml Relevant identified uses of the substance or mixture and uses advised against Sector of UseBuilding and construction work Application of the substance / the mixtureAdhesive mortar for anchor fastenings in concrete Details of the supplier of the Safety data sheet Manufacturer/Supplier:Hilti Austria 165, Postfach 316AT-1231 WienTel +43 1 66101 Fax +43 1 66101 257 Customer Service:Tel: 0800 818100 Fax: 0800 201990 Email: Informing section 16 Emergency telephone number :Schweizerisches Toxikologisches Informationszentrum - 24 h ServiceTel.

2 : 0041 / 44 251 51 51 (international). VergiftungsInformationsZentrale - 24 h Service014 06 43 43* SECTION 2: Hazards identification Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Aquatic Acute 1 H400 Very toxic to aquatic Irrit. 2H319 Causes serious eye Sens. 1H317 May cause an allergic skin reaction. Label elements Labelling according to Regulation (EC) No 1272/2008 The product is classified and labelled according to the CLP regulation. Hazard pictogramsGHS07 GHS09 Signal wordWarning Hazard-determining components of labelling:Hydroxypropyl methacrylatedibenzoyl peroxide Hazard statementsH319 Causes serious eye May cause an allergic skin Very toxic to aquatic life.

3 Precautionary statementsP280 Wear protective gloves/protective clothing/eye protection/face not get in eyes, on skin, or on +P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present andeasy to do. Continue +P313If skin irritation or rash occurs: Get medical +P313If eye irritation persists: Get medical +P352IF ON SKIN: Wash with plenty of soap and water.(Contd. on page 2) AT EN Page 2/7 Safety data sheetaccording to 1907/2006/EC , Article 31 / ISO 11014 Printing date : number 7 Trade name:Hilti HIT-HY 150 MAX(Contd. of page 1) Other hazards Results of PBT and vPvB assessment PBT:Not applicable. vPvB:Not applicable. Additional information:Hilti HIT Information pertaining to particular dangers for man and environment: AH317 May cause an allergic skin Causes serious eye irritation.

4 Information pertaining to particular dangers for man and environment: BH317 May cause an allergic skin Very toxic to aquatic life.* SECTION 3: Composition/information on ingredients Chemical characterisation: Mixtures Description:2-Component-foilpack, contains:Component A: Urethane methacrylate resin, inorganic fillerComponent B: Dibenzoyl peroxide, phlegmatizedMixture of the substances listed below with harmless additions. Dangerous components:. Dangerous components A:CAS: 27813-02-1 EINECS: : 01-2119490226-37 Hydroxypropyl methacrylateEye Irrit. 2, H319; Skin Sens. 1, H3175-15%CAS: 2082-81-7 EINECS: : 01-2119967415-30tetramethylene dimethacrylateSkin Sens. 1B, H3175-10%CAS: 3290-92-4 EINECS: 221-950-4 Trimethylolpropane trimethacrylateAquatic Chronic 2, H411<2,5%CAS: 10043-35-3 EINECS: 233-139-2 Boric acidRepr.

5 1B, H360FD<0,5%. Dangerous components B:CAS: 94-36-0 EINECS: : 01-2119511472-50dibenzoyl peroxideOrg. Perox. B, H241; Aquatic Acute 1, H400 (M=10); Eye Irrit. 2, H319; Skin , H3175-10% SVHC10043-35-3 Boric acid Additional informationFor the wording of the listed risk phrases refer to section 4: First aid measures Description of first aid measures General informationInstantly remove any clothing soiled by the product. After inhalationTake affected persons into the open air and position comfortably After skin contactInstantly wash with water and soap and rinse thoroughly. If skin irritation persist, call a physician. After eye contactRinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

6 After swallowingSeek immediate medical advice. Most important symptoms and effects, both acute and delayedNo further relevant information available. Indication of any immediate medical attention and special treatment neededNo further relevant information available. AT EN (Contd. on page 3)Page 3/7 Safety data sheetaccording to 1907/2006/EC , Article 31 / ISO 11014 Printing date : number 7 Trade name:Hilti HIT-HY 150 MAX(Contd. of page 2) 5: Firefighting measures Extinguishing media Suitable extinguishing agentsWater spray, carbon dioxide (CO2), carbon dioxide blanket, foam, or dry powder. For Safety reasons unsuitable extinguishing agentsWater with full jet. Special hazards arising from the substance or mixtureCan be released in case of fireCarbon monoxide (CO)Nitrogen oxides (NOx)Under certain fire conditions, traces of other toxic gases cannot be excluded.

7 Advice for firefighters Protective equipment:In the event of fire, wear self contained breathing apparatusSECTION 6: Accidental release measures Personal precautions, protective equipment and emergency proceduresWear protective clothing. Environmental precautions:Do not allow to enter the ground/soil. Methods and material for containment and cleaning up:Collect of the material collected according to regulations. Reference to other sectionsSee Section 7 for information on safe handlingSee Section 8 for information on personal protection Section 13 for information on 7: Handling and storage Precautions for safe handlingCheck the expiry date: see imprint on manifold (month/year). Do not use expired mortar!

8 Information about protection against explosions and fires:No special measures ignition sources away - Do not smoke. Conditions for safe storage, including any incompatibilities Storage Requirements to be met by storerooms and containers:Keep in a cool, dry and dark place; +5 C to +25 C. Information about storage in one common storage facility:Store away from foodstuffs. Further information about storage conditions:Protect from heat and direct in a cool place. Storage classAs per VCI (1991) storage classification Specific end use(s)Adhesive mortar for anchor fastenings in concrete* SECTION 8: Exposure controls/personal protection Additional information about design of technical systems:No further data; see item 7.

9 Control parameters Components with limit values that require monitoring at the workplace:The product does not contain any relevant quantities of materials with critical values that have to be monitored at product has a pasty consistency. Exposure limit values for respirable dusts ar not relevant for this product. Additional information:The lists that were valid during the compilation were used as basis. Exposure controls Personal protective equipment General protective and hygienic measuresThe usual precautionary measures should be adhered to general rules for handling contact with the eyes and not eat, drink or smoke while away from foodstuffs, beverages and sure to clean skin thoroughly after work and before breaks.

10 (Contd. on page 4) AT EN Page 4/7 Safety data sheetaccording to 1907/2006/EC , Article 31 / ISO 11014 Printing date : number 7 Trade name:Hilti HIT-HY 150 MAX(Contd. of page 3) Breathing equipment:Not required. Protection of hands:Protective glovesEN 374 / EN 388 The glove material has to be impermeable and resistant to the product/ the substance/ the direct contact with the chemical/ the product/ the preparation by organisational measures. Material of glovesNitrile rubber, NBRThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality and variesfrom manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glovematerial can not be calculated in advance and has therefore to be checked prior to the application.