Transcription of 7 DAY ELECTRONIC TIMER OPERATING INSTRUCTIONS
1 Please read the following INSTRUCTIONS carefully before connecting this TIMER to electrical : 250 VAC, 50 HzMax Load: 13A, ,3120 WMin. Setting Time: 1 MinuteBattery backup: NiMH > 100hoursOperating temperature: -10 C to +40 C Accuracy: +/- 1 minute per month7 DAY ELECTRONIC TIMER OPERATING INSTRUCTIONSIMPORTANTDon't plug in an appliance where the load exceeds 13 Amp. Always ensure the plug of any appliance is fully inserted into the TIMER outlet . If cleaning of the TIMER is required, remove from mains power and wipe TIMER with a dry cloth. DO NOT IMMERSE TIMER IN water OR ANY OTHER and similar appliances should never be left unattended during operation. The manufacturer recommends such appliances not be connected to DEFINITION1. RESET: Clear all data in memory including current time and all UP: Set current time combined with buttons SET, DOWN; Set programs combined with buttons SET, DOWN ;3.
2 DOWN: Set current time combined with buttons SET, UP; Set programs combined with buttons SET, UP;4. SET: Set current time combined with buttons UP, DOWN; Set programs combined with buttons UP, DOWN ;5. MANUAL: Select OPERATING modes (ON,AUTO,OFF)of TIMER ; Override programs or recall the overridden programs in setting OPERATION1. Plug the TIMER into a regular 250 Volts power outlet and turn the power on. Leave for approximately 14 hours to charge the Memory Back-up Clear all current information by pressing RESET button with a sharp object such as a pen or pencil after The TIMER is now ready to be set up for CURRENT TIME1. Press UP button or DOWN button until the CLOCK displays in Press SET button 2 seconds at least,the SET will display in HOUR will flash at same time.
3 The time change to SET can set the current time now. 3. Press UP button or DOWN button to set the HOUR .4. Press SET button once time and release, The MINUTE will flash. the HOUR will stop flashing and keep disp Press UP button or DOWN button to set the MINUTE .6. Press SET button once time and release,The WEEK DAY will flash. the MINUTE will stop flashing and keep Press UP button or DOWN button to set the WEEK DAY .8. Press SET button once time and release,the time change to CLOCK mode. 9. To reset incorrect time, repeat above PROGRAMSTIP: When verifying your programs ensure that the settings do not overlap, especially when using the block option. If there are program settings overlapping, the TIMER ON or OFF will be executed according to program time, not by program number.
4 Program OFF has the priority over program ON. Please verify thetimer s operation mode, if you want to arm the programs, the TIMER must be in AUTO Press UP button or DOWN button untill LCD shows ON_1. The first ON setting can be made Press SET button once and release,the SET will display in HOUR will flash at same time. 3. Press UP button or DOWN button to set the HOUR .4. Press SET button once time and release, The MINUTE will flash. the HOUR will stop flashing and keep Press UP button or DOWN button to set the MINUTE .6. Press SET button once time and release. The WEEK DAY will flash. the MINUTE will stop flashing and keep Press UP button or DOWN button to set the WEEK DAY . EXAMPLE: TIMER ON at 5:15PM and OFF at 10:30PM Press UP button or DOWN button untill LCD shows Press SET button once time and release, The HOUR will flash at same Press UP button or DOWN button till LCD displays 5 Press SET button once time and release.
5 The MINUTE will flash. the HOUR will stop flashing and keep Press UP button or DOWN button till LCD displays 5 Press SET button once time and release. The WEEK DAY will flash. the MINUTE will stop flashing and keep Press UP button or DOWN button till the LCD displays MO, TU, WE,TH, FR, SA, SU .h. Press SET button once time and WEEK DAY will stop flashing and keep Press UP button once and release. LCD displays Repeat the above b,c,d,e,f, g and h till LCD displays 10 Press MANUAL button till LCD displays DAY ELECTRONIC TIMER OPERATING INSTRUCTIONSMANUAL ON/AUTO/MANUAL OFF SETTINGO perating modes can t be changed during program settings. 1. Press MANUAL button to revert the three modes in The programs can only be executed in AUTO mode. When AUTO is selected, the TIMER operates as the programs.
6 In MANUAL ON or MANUAL OFF mode all programs are ignored and the TIMER doesn't operate. When MANUAL ON mode is selected, power output is always ON. When MANUAL OFF mode is selected, power output is permanently off. 3. When the mode is turned from MANUAL ON to AUTO, the TIMER will keep the setting of MANUAL ON until to the next TIMER FUNCTION1. Press MANUAL button and SET button simultaneously. LCD shows S(Summer time). Clock advances 1 To revert to winter setting, press the two buttons again. Clock moves backward 1 hour. S disappears in GRADATIONP lease notice the operation gradation when you set the TIMER , it will operate as follows gradation:1. MANUAL ON OR MANUAL OFF ------> 2. PROGRAM It executes the MANUAL ON OR MANUAL OFF setting first, PROGRAM setting second, Please set the right operation FEATURES1.
7 10 ON/OFF programs with 1 minute MANUAL ON/AUTO/MANUAL OFF 12 hour(AM,PM) mode LCD display with Summer time function 16 combinations of day or blocks of days available as follows:MOTUWETHFRSASUMO, TU, WE, TH, FR, SA, SUMO, TU, WE, TH, FRSA, SUMO, TU, WE, TH, FR, SAMO, WE, FRTU, TH, SAMO, TU, WETH, FR, SAMO, WE, FR, SUPlease note: this item is no longer available at , however, there are many other7-day ELECTRONIC timers and time delay switches.
