Example: tourism industry
Spicer Yoke & U-Joint Measuring
and include 5-153X (Spicer service kit – greaseable), 5-1310-1X (Spicer Life/SPL greaseable), and 5-1310X Spicer Life/SPL non-greaseable). For multiple series measurements, refer to the K350 catalog. With a Half-Round Driveshaft Yoke 1. Measure from the inside of the tab, as shown 2. The correct driveshaft/u-joint series will be
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
Illustrated Parts List
d3qx1uccksbb2n.cloudfront.net• This parts book is organized in sections according to parts servicing requirements. Use the Contents or page headings and colored tabs to find information. • Use this book to order parts for your Dana® Spicer® Axle. • For convenience, part numbers have been included for all pieces of the carrier assembly. Some of these parts, such as
Illustrated Parts List
d3qx1uccksbb2n.cloudfront.net3. Locate the desired part in the exploded illustration and note Item No. This Item No. will lead you to the part name and num-ber. 4. Refer to the related Parts Listing and locate the same Item No. and the name. If more than one part number is listed, refer to the axle model listings at top of list and select the part number
Service Manual - d3qx1uccksbb2n.cloudfront.net
d3qx1uccksbb2n.cloudfront.netCheck Input Shaft End-play (Forward Axle) ..... 7 Check Output Shaft End-play (Forward Axle).....7 Remove Differential Carrier ... OEM requirements such as yokes or flanges. 4 - OEM part number assigned to the axle build 5 - Carrier assembly serial number assigned by the manufac-turing plant
Related documents
MERITOR BRAKE SHOE IDENTIFICATION CHART
graphicvillage.org4692 12.25” x 7.5” Dana Spicer “Fast Change II” C4692FC2 4 4692 12.25” x 7.5” Dana Spicer “U” C4692U 4 4693 15” x 4” Bendix 6 4701 16.5” x 7” Spicer XL C4701 11 4702 15” x 4” Meritor Q Plus Front C4702QP 8 4703 15” x 5” Meritor Q Plus Front C4703QP 8 4704 15” x 6” Meritor Q Plus Front C4704QP 8
Illustrated Parts List - Dana
www.dana.com.auSpicer® Drive Axles Illustrated Parts List April 2013 D170, D170D, R170, R170D - Single Reduction - Tandem Axles D190, D190D, R190, R190D - Single Reduction - Tandem Axles
Service Manual - Dana Incorporated
www.dana.comDana reserves the right to discontinue or to modify its models and/or procedures and to change specifications at any time without notice. Always use genuine Spicer replacement parts. Welding or machining on any axle component is prohibited unless noted otherwise in this document or other Spicer service literature.
Specifications Guide - Dana Incorporated
www.dana.comThis guide is periodically updated throughout the year. The most current information can be found on dana.com/cv 5 Spicer® Single Reduction Single Drive Axles BLUE ...
King Pin Kits - Stemco
www.stemco.comking pin kits spindle bore and axle eye beam sizes make axle code oe kit number oe pin specs lip seal installation tool spicer / dana / eaton 02-aed; 02-aeg; e1200i/w; e1201i/w; e1320i/w 328342; 328344; 823079 1.794 x 9.05 st70-7
Dana Spicer Heavy Tandem Drive Axles - Drivetrain
www.redramgear.ca• Use this book to order parts for your Dana® Spicer® Axle. • For convenience, part numbers ha ve been included for all pieces of the carrier assembly. Some of these parts, such as the carr ier and caps, are serviced only in kits or assemblies. Part numbers are for your reference only. Those parts not serviced separately are identified ...
Dana Spicer Tandem Drive Axles - Supermiller
www.supermiller.com2. The specification number assigned to the axle build by Spicer. The spec number will identify all the component parts of the axle as built by Spicer, including special OEM requirements such as yokes or flanges. 3. The axle model identification. 4. The production or service part number of the carrier assembly. 5. The gear ratio of the axle. 6.
Mystik JT-6 Hi-Temp Greases
docs.mystiklubes.com• Approved for use in Rockwell and Spicer universal joints. • JT-6 Hi-Temp No. 1 developed for applications where service conditions dictate a grease of softer consistency. • Both grades meet the highest performance categories of ASTM D4950 Automotive Grease Classification System, GC for wheel bearing service and LB for chassis service.
Illustrated Parts List - Canada-Wide Parts
www.canadawideparts.comSpicer® Tandem Axles Illustrated Parts List AXIP0085a January 1994 Single Reduction, Dual Range, & Double Reduction Addendum 461, 462, 463, 521, 581 46,000 - 65,000 lbs
SKF Bearings and Seals
www.skf.com2015 Catalog 457601 Supercedes 457601, Dated 2008 SKF Bearings and Seals Heavy duty truck wheel end components Includes applications, specifications and interchanges