Submittal ML-1.0 10-16-17 - Titus HVAC | …

1 SSSSS ubmittalLinear Slot Ceiling DiffusersAluminum are in = ML-38S = ML-39S = 1"ML-40 S= 1- ModelSupplyMLR-37 S = MLR-38 S = MLR-39 S = 1"MLR-40 S= 1- ModelReturnBorder Type 1 Awith Flange Border Screw MountingBorder Type 1 Bwith Flange Border Duct MountingBorder Type 2 ABorder Type 2 Bboth with Flanged Border Concealed Mountingfor #8 SMS (5/16" from Edge)D'=Duct Size O'= D' plus 7/8"3/4"1 1/8"1/8"1 3/4"SCountersunk Screw HolesD'=Duct Size 1 1/8"S3/4"O'= D' plus 7/8"1/8"1 3/4"1/8"AS1 3/4"D'=Duct Size 3 5/16"1/8" to 1/2"3/4"O'TypeA0'2A2B1 1/87/8D + D + MLR-37 Slot ReturnMLR-38 Slot ReturnMLR-39 1" Slot ReturnMLR-40 1- " Slot ReturnBorder Type 22with Tape & Spackle Border H9 Hard Ceiling ClipNote: ML/MLR-37 is not available for border 22 Models: ML-37 Slot Supply ML-38 Slot Supply ML-39 1" Slot Supply ML-40 1- " Slot 10-16-17 Frame & Border Types, Dimensions (cont d)Check if provided.

2 Frame and Border Type 3with Flush Border Concealed M ountingFrame & Border Type 6with Plaster & Tile Mounting Frame Flush Border Concealed MountingFrame & Border Type 4with Flange Border Concealed M ountingFrame & Border Type 7 AFrame & Border Type 7 Bboth with Plaster & Tile Mounting Frame Flange Border Concealed M ountingBorder Type 12with Spline Border Ceiling HangersML-38 Border Type 16 with Curved Flange Border Concealed M ounting Equalizing GridBorder Type 15with Flush Border Ceiling Hangers1 7/8"S3/4"O'=D'minus1/8"3/4"D'=Duct Size 3 5/16"1 15/16"S1 1/8"3/4"O'=D' plus 3/4"1/8"D'=Duct Size 3 5/16"1/2"S3/4"O'=D' minus 1/8"3/4"D' plus 1/2"D' plus 1 1/4"D'=Duct Size 1 7/8"1"3 5/16"D'=Duct Size D' plus 1/2"D' plus 1 1/4"3/4"O'9/16"1 1/16"AS1/8"3 5/16"1 15/16"TypeA0'7A7B1 1/87/8D + D + Border Type 9 ABorder Type 9 Bboth with Flange Border Ceiling HangersTypeA0'9A9B 1 1/8D + 5/8D + 1 3/8 Border Type 11with Perimeter Plaster & Tile Mounting Frame Flush Border Concealed M ounting1/16"SAO'Hanger1 3/4"3 1/8"D'=Duct Size 3/4"D'=Duct Size O'=D' minus 1/8"S3/4"3/4"1 7/8"1/2"1"3/4"3 5/16"1 3/16"7/16"O'=D' minus 1/16"Hanger1 3/4"7/16"S3/4"D' = Duct Size 3 1/8"O'=D' minus 1/16"1 1/16"3/4"7/16"S3 1/8"Hanger1 3/4"D'=Duct Size 1/2 X 1/2 X 1/2 ALUMINUMEQUALIZING GRIDDUCT BY OTHERS3/41 1/8 Standard selections: ML-38 only1 slot: duct diameters 10, 12, 14, 16, 18, 20, 22, 24 2 slot: duct diameters 12, 14, 16, 18, 20, 22, 24 3 slot: duct diameters 14, 16, 18, 20, 22, 24, 26, 28, 30"4 slot.

3 Duct diameters 20, 22, 24, 26, 28, 30, 32 COCOCOCOCOCO1A, 1B, 9BD -1 3/8D +3/4D -11/16D +3/8D -5/8D +7/16 DDD +1/16D +1/16D +1/8D +1/82A, 4, 7A, 16D -1 3/8D +3/4D -11/16D +3/8D -5/8D +7/16 DDD +1/16D +1/16D +1/8D +1/83, 6, 11D -1 3/8DD -11/16DD -5/8D +1/16 DDD +1/16D +1/16D +1/8D +1/82B, 7BD -1 3/8D +1/4D -11/16D +1/8D -5/8D +3/16 DDD +1/16D +1/16D +1/8D +1/89AD -1 3/8DD -11/16DD -5/8D +1/16 DDD +1/16D +1/16D +1/8D +1/812, 15D -11/16DD -5/16DD -1/4D +1/16 DDD +1/16D +1/16D +1/8D +1/822D -1 3/16D +1 1/16D -19/32D +17/32N/AN/ADDN/AN/AN/AN/AY-YY-ZZ-ZFrame and/or Border 10-16-17 End FabricationX End BorderY Open EndZ End CapCD = Duct SizeOOCD = Duct SizeOD = Duct SizeCOverall Length for Various End FabricationsDuct Dimensions D (Width) for Various Frame & Border TypesML/MLR37ML/MLR38ML/MLR39ML/MLR40ML/ MLR37ML/MLR38ML/MLR39ML/MLR40S = 1/2S = 3/4S = 1S = 1 1/2S = 1/2S = 3/4S = 1S = 1 1/211 7/82 1/82 3/82 7/822 1/42 1/2323 1/83 5/84 1/85 1/83 1/43 3/44 1/45 1/434 3/85 1/85 7/87 3/84 1/25 1/467 1/245 5/86 5/87 5/89 5/85 3/46 3/47 3/49 3/456 7/88 1/89 3/8N/A78 1/49 1/2N/A68 1/89 5/811 1/8N/A8 1/49 3/411 1/4N/A79 3/811 1/812 7/8N/A9 1/211 1/413N/A810 5/812 5/814 5/8N/A10 3/412 3/414 3/4N/ANo.

4 OfSlotsTypes 1A, 1 BTypes 2A, 2B, 4, 7A, 7B, 16ML/MLR37ML/MLR38ML/MLR39ML/MLR40ML/MLR 37ML/MLR38ML/MLR39ML/MLR40S = 1/2S = 3/4S = 1S = 1 1/2S = 1/2S = 3/4S = 1S = 1 1/212 1/82 3/82 5/83 1/81 3/81 5/81 7/82 3/823 3/83 7/84 3/85 3/82 5/83 1/83 5/84 5/834 5/85 3/86 1/87 5/83 7/84 5/85 3/86 7/845 7/86 7/87 7/89 7/85 1/86 1/87 1/89 1/857 1/88 3/89 5/8N/A6 3/87 5/88 7/8N/A68 3/89 7/811 3/8N/A7 5/89 1/810 5/8N/A79 5/811 3/813 1/8N/A8 7/810 5/812 3/8N/A810 7/812 7/814 7/8N/A10 1/812 1/814 1/8N/A` = Not Available in Type 22 Types 9A, 9B, 12, 15, 22No. ofSlotsTypes 3, 6, 11X End Border (Type 22 Only) 10-16-17 Accessories (optional)Check if provided. This Submittal is meant to demonstrate general dimensions of this product. The drawings are not meant to detail every aspect of the product. Drawings are not to scale. Titus reserves the right to make changes without written rights r eser ved. No part of this work may be reproduced or transmitted in any for m or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system without permission in writing from Air Distribution Description Standard lengths of diffuser sections are 12 , 24 , 36 , 48 , 60 and 72.

5 Lengths greater than 72 are furnished in multiple sections, the number and size determined by the factory. Pattern controllers change direction and volume of air flow. Maximum length is 36 . Pattern controllers are furnished in multiple sections for diffuser longer than 36 .Standard Finish: #26 White border Black pattern controllers. Mounting frames are cut to length and assembled in the field. Material is extruded aluminum with steel pattern Slot ReturnMLRF-38 Slot ReturnMLRF-39 1 Slot ReturnMLRF-40 1- Slot ReturnMLF-37 Slot SupplyMLF-38 Slot SupplyMLF-39 1 Slot SupplyMLF-40 1- Slot SupplyIdeal when the exact length of an M L or MLR diffuser is not known until it is being factory cut diffusers can be trimmed as much as 6 inches. If more than 6 is to be removed, use the optional field cut field cut ML or MLR diffuser is 72 long, with the sides pre-punched to assure the proper alignm ent of field installed spacers.

6 These field installed spacers provide additional rigidity during and after spacer kits available at extra Degree (minimum)Larger than 90 Degree. Specify_____MC-37 Slot SupplyMC-38 Slot SupplyMC-39 1 Slot SupplyMC-40 1- Slot SupplyOptional Field Cut Diffuser (Unit includes one field spacer kit)Optional Mitered CornerODODODODODODODOD1, 2 12 7/161212 3/81212 1/81211 7/81212 5/161212 11/1612121213 3/16123-8 24 7/162424 3/82424 1/82423 7/82424 5/162424 11/1624242425 3/1624229A9BN o . o f Slo t s12, 151A, 1B2A, 4, 7A2B, 7B3, 6, 11 Dimensions for 90 Degree Mitered CornersAll dimensions are in = Duct SizeOD = Duct SizeANGLESPECIFYMPI-37 Slot InsulatedMPI-38 Slot InsulatedMPI-39 1 Slot InsulatedMPI-40 1- Slot InsulatedNote: endcaps are not insulatedMP-37 Slot UninsulatedMP-38 Slot UninsulatedMP-39 1 Slot UninsulatedMP-40 1- Slot UninsulatedOptional PlenumOptional Blank-OffsNote: MP and MPI are available for all frames and border types.

7 Standard nominal lengths are 2, 3, 4 and 5 feet. Request Submittal D-MP for details. Option MP-SP available with maximum spread DesignOptionalBLKS - Cold Rolled Steel - Fits over NeckBLKV - Vinyl - Fits in Slot