05 13 Medium Voltage Cables
Found 4 free book(s)
LED High Bay I-BEAM IBE
pdmassets.azureedge.net10 Cord sets are voltage specific. Specify voltage. Other configurations available. Consult factory. Battery not available on cord sets with plugs. 11 Other configurations available, see page four for additional options. 12 Additional support cables required when used with L48. 13 For use in applications with ambient temperatures up to 35°C for
Levelflex FMP51, FMP52, FMP54
portal.endress.comFeb 01, 2003 · •The DC of the upper medium may not be greater than 10. •The DC difference between the upper medium and lower medium must be >10. •The upper medium must have a minimum thickness of 80 mm. •Conductivity of the upper medium: < 1 mS/cm •Conductivity of the lower medium: > 100 mS/cm
Soliphant M FTM50, FTM51, FTM52
portal.endress.comThe connecting cables must withstand the ambient temperature +5 K. Connecting cables • Electronic inserts: cross-section max. 2.5 mm (13 AWG); strand in ferrule to DIN 46228 • Protective ground in housing: cross-section max. 2.5 mm (13 AWG) • Equipotential bonding connection on housing: cross-section max. 4 mm (11 AWG)
M22759 (SAE AS22759)
www.cabletool.net36 Eastern USA: (888) 761-7800 • Western USA: (800) 423-5873 www.thermaxcdt.com Asia: (818) 701-0565 • Other International: (203) 284-9610 M22759 wire M22759 (SAE AS22759)wires are high-performance, medium and high-temperature hookup wires with extruded PTFE or ETFE, or PTFE/polyimide tape insulators, and stranded conductors.