4 Hardware Settings

NI Serial Hardware Specifications and Features Guide ...

NI Serial Hardware Specifications and Features Guide Serial Hardware Features To determine which features your product supports, refer to the following table. Table 7. Serial Hardware Features Hardware Adjustable FIFO Settings Get Interface Type RS-485 Transceiver Control RS-485 Socketed Bias Resistors RS-485 Program-matically Controlled Bias ...

  Guide, Feature, Hardware, Specification, Testing, Hardware specifications and features guide

BROADCAST SPREADER APPLICATION CHART 3854

The following settings can be used to apply products not found in the application chart. These are general information settings intended to be used as references. Fertilizer Pounds Per 1000 sq. Ft. 2.5 3 3.5 4 Setting Broadcast Spreaders 4 5 5.5 6 Insecticide (Diazinon) 2 Setting Broadcast 3.5 Grass Seed Blue Grass Bent Grass Fine Mixture ...

  Testing

USB AUDIO INTERFACE - Steinberg

settings of the device. 1Sample Rate Lets you select the sample rate of the device. Options: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz NOTE The available sample rates may differ depending on the particular DAW you're using. 2Enable Loopback Use the check box to turn Loopback on/off. ASIO Window For selecting the ASIO driver ...

  Testing

User’s Guide

4. Select your printer from the list, then follow the instructions on the screen. 5. When the installation is complete, see page 15 to install the Reference Guide and the EPSON Remote Configuration Utility. For Windows 98, 95, or NT 4.0 1. Make sure Windows is running and the printer is turned off. 2.

  Epson

USB AUDIO INTERFACE - Steinberg

4[POWER] indicator The indicator lights when the power is turned on. The indicator flashes continuously when the computer or iPad does not recognize the device. 5[INPUT 1/2 GAIN] knob Adjusts the input signal level of the [MIC/HI-Z 1/2] jack. 6[INPUT 3/4 GAIN] knob Adjusts the input signal level of the [MIC/LINE 3/4] jack. HINT