485 Port
Found 6 free book(s)
TARIFFS - Transnet Port Terminals
www.transnetportterminals.net“The Terminal Operator” shall mean Transnet Port Terminals, a division of Transnet SOC Limited. Ports: Area of Jurisdiction The area within which Transnet has jurisdiction at the respective ports is as appearing in The National Ports Act No. 12 of 2005 (”the Act”) and the Port Rules issued in terms of Section 80 (2) of the Act.
SLC 500 SYSTEMS - Rockwell Automation
literature.rockwellautomation.comEach processor has one or two built-in ports for either EtherNet/IP, DH+, DH-485, or RS-232 (DF1, ASCII, or DH-485 protocol) communication. In addition to the on-board ports available with SLC processors, you have the option of providing another communication port for an SLC processor by adding a communication module.
UniFi PoE Switch Datasheet
dl.ubnt.comEach 48-port model adds two SFP+ ports for high-capacity uplinks of up to 10 Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch. Internet ... Dimensions 485 x 43.7 x 374.6 mm (19.09 x 1.72 x 14.75") ...
1756 ControlLogix Communication Modules Specifications ...
literature.rockwellautomation.comDH-485 Network 20 SynchLink Communication 22 ControlNet Network 24 Legacy Modules 30. 2 Rockwell Automation Publication 1756-TD003P-EN-E - November 2021 ... The USB port is intended for temporary local programming purposes only and not intended for permanent connection. Do not use the USB port in hazardous locations.
28/40/44-Pin, Low-Power, High-Performance Microcontrollers ...
ww1.microchip.com- Supports RS-485, RS-232 and LIN - RS-232 operation using internal oscillator - Auto-Wake-up on Break - Auto-Baud Detect TABLE 1: PIC18(L)F2X/4XK22 FAMILY TYPES Device Program Memory Data Memory I/O (1) 10-bit A/D Channels (2) CCP ECCP (Full-Bridge) ECCP (Half-Bridge) MSSP EUSART Comparator CTMU BOR/LVD SR Latch 8-bit Timer 16-bit Timer
SIMATIC IOT2020, SIMATIC IOT2040 - Siemens
cache.industry.siemens.comQualified Personnel The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions.