5 Flow

Study on Drag Coefficient for the Flow Past a Cylinder

calculated from data obtained by performing tests in an air flow bench (AF12) with varying flow velocities and diameters as 12.5mm, 15 mm, 20 mm, and 25 mm. To obtain the values of co-efficient of drag, two methods: (i) direct weighing method, and (ii) pressure distribution around the cylinder, has been used.

  Flows

Example 5 Consider steady, incompressible, parallel ...

Example 5 Consider steady, incompressible, parallel, laminar flow of a viscous fluid falling between two infinite vertical walls (Fig. 5). The distance between the walls is h, and gravity acts in the negative z-direction (downward in the figure). There is no applied (forced) pressure driving the flow— the fluid falls by gravity alone.

  Flows

Small Block Chevy LS Cylinder Heads by Casting Number ...

933 97 aluminum perimeter bolt 5.7 806 97-98 aluminum perimeter bolt 5.7 853 99-00 aluminum center bolt 5.7 241 01-03 aluminum center bolt 5.7 (some late MY00 cars got 241 castings) 243 04 up LS6 aluminum center bolt 5.7 ***These castings were also used around 05 in truck applications*** 862 99 and up 4.8-5.3 Truck heads