A Molded Rubber Product
Found 4 free book(s)
Phthalates: The Everywhere Chemical
www.niehs.nih.govrecycling symbol usually molded into the plastic on the bottom of the product. Avoid products . with the number 3 within the arrows and the letters “V” or “PVC” below the arrows. Choose. products with the numbers 1,2, 4 and 5 within the arrows. Many companies use phthalate-free substances such
Hytrel® Product and Properties Guide
www.engpolymer.co.krProduct and Properties Guide Benefits of a drive axle boot design in Hytrel® over the previously used rubber part include: • Provides threefold increase in part life on the vehicle • Superior resistance to mechanical damage • 50% reduction in weight • 90% reduction in molding cycle time Due to its excellent resiliency, colorability ...
RADIAL AND ANGULAR CONTACT BEARINGS - Timken …
www.timken.comthree Timken rubber seals separated by steel spacers and retained by steel caps in the outer ring and the other, a highly effective one-piece, molded seal design. Both designs have an exterior shroud cap to protect the seals and reinforce the exceptional sealing action of the complete unit. A patented notched seal groove design, provided on
Pigments for plastics - BASF
www.basf.comProduct Sustainability Accelerator* Full shade (FS) White reduction (WR) Applications Application performance Physical properties Available preparations General Fibers HDPE PVC-p PVC PO PS ABS PA6 PETPC PMMA Rubber PUR PP PA Migration FS 0.1% Heat FS 0.1% Heat WR 1:10 Light FS 0.1% Light WR 1:10