Alloy 22
Found 7 free book(s)
RELATIVE COST RATIO ALLOY UNS No. 304L=1.0 ... - Steel Tank
www.steeltank.comAlloy C-22 N06022 9.00 6.98 68.00 Alloy 622 N06022 8.81 6.83 68.00 Alloy 59 N06059 8.58 6.66 74.00 Alloy C-2000 N06200 9.42 7.31 74.00 Alloy 686 N06686 9.44 7.32 76.00 Alloy B-2 B-3 N10675 18.43 14.30 Relative prices are based on 30,000 pounds of 3/8" x …
HASTELLOY C-22 alloy - Haynes
www.haynes.chC-22 alloy was selected over 19 different alloys for the clamshell bellows after extensive testing. The bellows have been in service for more than 12 years. Sleeved electrogalvanizing finish-ing rolls made of HASTELLOY C-22 alloy are ready for place-ment in a steel finishing manufacturing line. C-22 alloy helps reduce defects on the rolls
THE ALLOY SPECIALISTS - Special Metals Corporation
www.specialmetals.comALLOY HANDBOOK 2 ALLOY HANDBOOK 3. LEVERAGING A NETWORK . OF Expertise The properties of our specialty metal offerings are unmatched, but as part of Precision Castparts
INCONEL alloy 625 - Special Metals Corporation
www.specialmetals.com1400 23.3 22.8 8.7 8.8 0.340 0.305 760 160.6 157.2 60.0 60.7 1600 21.4 21.5 8.0 8.3 0.336 0.289 871 147.5 148.2 55.2 57.2 aDetermined dynamically on samples from ¾ -in. hot-rolled rod. Mechanical Properties Nominal room-temperature mechanical properties of INCONEL alloy 625 are shown in Table 5.
SA-387 Steel Plate, Grades 5, 9, 11, 12, 22 and 91 Class 1 ...
wingatealloys.comresistance, SA387 Grade 22 Class 2 plates are a good option. SA387 GR 91 CLASS 2 Where resistance to high temperature and good anti-corrosion characteristics are required, ASME SA387 Grade 91 Class 2 carbon alloy steel plate is a material to consider. It is a pressure vessel grade
Bellows-Sealed Valves, B Series (MS-01-22;rev N ... - Swagelok
www.swagelok.comwww.swagelok.com B Series Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900°F (482°C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections Brass, stainless steel, and alloy 400 materials Bellows-Sealed Valves
ALLOY 4043 WELD DATA SHEET - AlcoTec
www.alcotec.com6063-t4 25 22 22 20 10 12 30 ----- 13 (1) requires sufficient dilution of base metal into weld pool for heat treat and/or age response. refer to alcotechnic concerning alloy 4643 for additional information (2) postweld aged only.