Architectural coatings
Found 6 free book(s)Roof and Wall Flashing Architectural Detailing Design Guide
www.stramit.com.auARCHITECTURAL DETAILING This Design Guide has been prepared to assist architects and architectural draftspersons with the design and installation intricacies of detailing roof and wall flashing for metal cladding. Quality of a ... coatings of ZINCALUME ...
Louver Finishes &Colors Use the reference chart below to ...
content.greenheck.comLouvers and architectural products shall be cleaned, pre-treated and receive a prime coat finish suitable for field painting. Products must be thoroughly cleaned and prepared prior to field application of epoxy, urethane or other heavy-duty coatings. Greenheck does not recommend prime coat or field painting of louvers and architectural products.
Surface Treatment of Metals and Plastics
eippcb.jrc.ec.europa.euof other treatments such as painting or photosensitive coatings for printing. Plastics, which are cheaply available and easily moulded or formed, retain their own properties such as insulation ... about 10.5 million tonnes and about 640000 tonnes of architectural components were anodised. Another measure of the industry size and importance is ...
Guide to Stainless Steel Finishes
www.worldstainless.orgdemanding architectural requirements. Four particular surface designations are im-portant for architectural and building appli-cations. These are: 1D, 2D, 2B and 2R. Mill Finishes GUIDE TO STAINLESS STEEL FINISHES 3 1D Hot rolled and annealed, and with the mill scale removed, this surface condition is classified as a 1D finish.
SPECIAL INSPECTIONS PROGRAM - 2015 Edition
www.fairfaxcounty.govspecify architectural construction in accordance with the Virginia Construction Code and the Code of the County of Fairfax, and whose signature and seal appear on the county- approved architectural construction documents. Building. Construction with a roof (a "roofed structureā€¯), for use or occupancy. Building core and shell.
American - Milgard
www.milgard.comAAMA 2410-13 Page 1 1.0 SCOPE . 1.1 This practice covers the installation of retrofit windows in detached one- and two-family dwellings and townhouses not more than three stories above-grade in height with a separate means of egress. 1.2 This practice applies to retrofit windows with an exterior flush fin installed over a pre-existing window frame into a