Lighting And Occupancy Sensors
Found 7 free book(s)Dual Technology Ceiling Mount Sensor
www.lutron.comSensors LOS-CDT Series Occupancy Sensors 369653c 3 02.07.13 ower packs may be required when interfaced to LutronP R lighting control systems. If more than 1 occupancy sensor is connected to the same input, a power pack is required. A maximum of 3 occupancy sensors can be connected to the same input.
Energi Savr Node T - Dimmers And Lighting Controls
www.lutron.comOccupancy Sensors (continued) • Occupancy sensor must provide a dry contact clo-sure or solid-state output. • Additional occupancy sensors can be used with the Energi Savr NodeT unit. Refer to the “Programming Options and Features” table for system rules. Infrared (IR) Receivers • Use Lutron IR receivers and compatible transmitters
Parking Structure Lighting Guide - Energy
www.energy.govramp and entrance lighting levels to save additional energy at night. If considering adding occupancy sensors to turn lights down or off during low activity periods, consider whether to turn off individual luminaires or reduce output for a group of luminaires. Turning off luminaires may result in poorer lighting uniformity on the pave-
AN ASSESSMENT OF ENERGY TECHNOLOGIES AND …
www.energy.govof lighting devices) and improving the way they are controlled as a part of integrated building systems (e.g., sensors that adjust light levels to occupancy and daylight). Key research opportunities include the following: High-efficiency heat pumps that reduce or eliminate the use of refrigerants that can lead to GHG emissions
EXTERIOR LIGHTING GUIDE
cltc.ucdavis.eduWhen combined with the right sensors to maximize efficiency without compromising safety, exterior lighting can be vastly improved, typically saving more than 50% in retrofit applications. Exterior lighting comprises a large portion of energy use at …
WASP OCCUPANCY SENSOR
hubbellcdn.comupward looking daylight sensors (Direction selectable via dip switch) • Surface mount sensor: Downward looking daylight sensor only CATALOG #: RELATED PRODUCTS OCCUPANCY SENSING IP65 DAYLIGHT HARVESTING SMART CYCLING *When used with program start ballast, a 1-2 second delay from occupancy detection to lamp turn-on may be experienced
Decora Wall Switch PIR Occupancy Sensor - Leviton
www.leviton.comOccupancy Sensor BASIC OPERATION The Leviton Decora® Wall Switch Passive Infrared (PIR) Occupancy Sensor (ODS10-ID) uses Passive Infrared (PIR) detection technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor