Selection Of Refrigerants On A Per Application

Solenoid Valves - Parker Hannifin Corporation

refrigerants because of high MOPD ratings. Consult Sporlan, Washington, MO for refrigerants not listed. n Synthetic coated metal gaskets minimize external leaks. ⚠WARNING – USER RESPONSIBILITY Failure or improper selection or improper use of the products described herein or related items can cause death, per-sonal injury and property damage.

  Selection, Refrigerant

ZoomLock - Parker Hannifin Corporation

The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow

  Applications, Selection

OPERATING INSTRUCTIONS - BITZER

using BITZER selection software to provide the correct selection for you specific application. Refer to KT102 Varispeed compressors; KT104 Ecoline compressors. Configuration Options: • Compressors all the same model/size for uniformity. Note: The 1st Compressor can be operated by a remote VSD drive system and the additional

  Applications, Selection

Heat Rejection Options - CED Engineering

It is important to understand “what heat of rejection is” before discussing the selection of ... constant pressure or nearly constant pressure when blended refrigerants are used. The THR of the condenser is defined by line J-H, which is the sum of the refrigeration ... A heat rejection factor of 1.25 results in 15000 Btuh heat rejection per ...

  Selection, Refrigerant

LG Refrigeration Compressors

Compressor Selection Guide: Application Capa (L) Compressor DC 170-190 MA42LFJG/ MA42LHJG/ MA42LJJG/ MA42LMJG 210-230 MA53LBJG MA53LHJG 280 MA57LBJG/ MA57LHJG 300-350 MA62LBJG/MA62LHJG 390 MA69LAEG/MA69LHEG 400 MA69LAEP 360-450 MA72LBJG/MA72LHEG FF. Refrigerator: Capa (L) Compressor 70-80 MA42LFJG / …

  Applications, Selection

ASHRAE Standards 15 and 34 for VRV/VRF Systems

application of refrigerant systems by limiting the maximum charge so that a complete discharge due to a leak into a small, occupied, and enclosed room can never exceed the allowable limit. As with most standards, ASHRAE Standard 15 is an application based standard, not an equipment design guide, so substantial

  Applications

Refrigeration Cycle - SFU

greater the refrigerating effect per kg of refrigerant 3- the specific volume of the refrigerant should be low to minimize the work required per kg of refrigerant circulated since evaporation and condenser temperatures are fixed by the temperatures of the surroundings 4- selection is based on operating pressures in the evaporator and the condenser.

  Selection

Water Source Heat Pump Systems - Sigler Commercial

Oct 04, 2017 · Water for closed-loop heat pumps is usually circulated at 2.25 to 3.00 gpm per ton of unit cooling capacity. A once-thru groundwater heat pump can operate with a lower water flow, but the same range is still recommended. The WSHP refrigeration circuit consists of a refrigerant-to-water heat exchanger, compressor,

  System, Pumps, Course, Water, Heat, Water source heat pump systems

Category 11: Use of Sold Products

per product, energy efficiency per product, emissions per hour of use, emissions per kilometer driven, emissions per functional unit, etc. Source: Box 5.8 from the Scope 3 Standard. This section provides guidance of the following: • What should be included in the emissions from use of sold products • Guidance on what to include in a use profile