Specialty Door Hardware

Introduction to Steel Doors and Frames - Steel Door Institute

The Steel Door Institute created ANSI/SDI A250.6 Recommended Practice for Hardware Reinforcing on Standard Steel Doors and Frames as a guide to door reinforcement and the installation of door hardware. It should be referenced by hollow metal door installers. The correct hardware must be selected to ensure the door and frame are properly reinforced.

  Hardware, Doors, Door hardware

CARPENTRY TRAINING MANUAL (SPECIALISED CARPENTRY)

and a double door at each end. The elevation also shows that at the end of the building with the loading platform, the door is at the level of the stage floor; all the other doors are at grade level. FLOOR PLANS A floor plan is a cross-sectional view of a building. The horizontal cut crosses all openings regardless of their height from the floor.

  Doors

A Guide to Working With Copper and Copper Alloys

are used as plumbing fixtures, decorative hardware, archi-tectural trim, low pressure valves, gears and bearings. Tin Brassesare alloys made from copper, zinc (2% to 40%) and tin (0.2% to 3%). This fami-ly of alloys includes admiralty brasses, naval brasses and free-machining tin brasses. These alloys are used to make high-strength fasten-

  Hardware

PRICE LIST - ngp.com

hÇm Þ à ªu!M u²fl 6 Phone: 800-647-7874 Fax: 800-255-7874 ordersngp.com ngp.com Threshold Fabrication Charges: Aluminum. Bronze Stainless Steel. Ripping Per Foot Per Rip (List) $ …