Stand Test
Found 3 free book(s)Conducting an N95 Respirator Fit Test
www.bu.eduAfter fitting their respirator, subjects should stand and once again don their hood enclosures. Remind subject not to take hood off during fit test and also to keep mouth open slightly as this is a taste test. Begin filling the enclosure with 10, 20 or 30 bursts from the test solution nebulizer.
AN3353 Application note - STMicroelectronics
www.st.comSTMicroelectronics test bench is described in Figure 2. All the dimensions (height, materials, insulator thickness etc.) and ground connections are in accordance with the standard (Figure 1). The ESD gun is mounted on a stand with a slide arm in order to move it up to the device under test especially during air discharge conditions. Figure 2.
Tube Fitting Performance Product Test Reports PTRs
www.swagelok.com1. Each sample was attached to a hydraulic test stand. 2. The tubing was restricted from burst by clamping blocks thereby forcing a failure at the fitting-to-tubing engagement. 3. The pressurewas gradually increased and pressurewas recorded when loss of tube grip,