Technical guide for cold formed steel framing products
Found 6 free book(s)A Beginner’s Guide to Cold-Formed Steel Framing
www.buildsteel.org“Code of Standard Practice for Cold-Formed Steel Structural Framing, 2015 Edition,” which is available for free download at www.aisistandards.org. AISI S202-15 addresses trade practices for the design, fabrication, and installation of cold-formed steel structural framing products. You do not need an engineer to design a two-story
AREA SEPARATION WALL SYSTEMS - Cold Formed Metal …
www.clarkdietrich.comA1003 "Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members" C645 ®"Standard Specification for Nonstructural Steel Framing Members" C754 "Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products"
FBC Advanced Residential - Florida Building
www.floridabuilding.org4. American Iron and Steel Institute (AISI), Standard for Cold-Formed Steel Framing—Prescriptive Method for One- and Two-family Dwellings (AISI 230) 5. Concrete construction shall be designed in accordance with this code 6. The MAF Guide to Concrete Masonry Residential Construction in High
Stramit Purlins Girts and Bridging Product Technical Manual
www.stramit.com.auOther Products 29 Patents/Design 29 Introduction This revised Strami t®Purlins, Girts and Bridging product technical manualincorporates limit state design capacities based on the latest software specifically developed for purlins and girts at Sydney University. This software is based on the limit state AS/NZS4600:1996 ‘Cold-formed steel’.
888.565.9181 • www.TrusSteel.com Truss Design Manual
www.cascade-mfg-co.comor construction. Please refer to the TrusSteel Standard Details for technical information on connection design, product use and safety. 1 2345678 1.01 Unmatched strength and stiffness in a cold-formed steel truss. TrusSteel is the most accepted, most specified cold-formed steel (CFS) truss system on the market today. No
Purlins & Girts - Stratco
www.stratco.com.auNew Zealand Standard AS/NZS 4600:2005 Cold-formed steel structures. They have been generated using the latest version of the purlin and girt software developed by the Centre for Advanced Structural Engineering at the University of Sydney and cover the full range of Stratco Z and C sections from 75mm through to 400mm depth.