Technical sheet page 1
Found 6 free book(s)3M Fire Barrier Sealant FD-150 Technical Data Sheet
multimedia.3m.comPage 1 of 4 Technical Data Sheet October / 2019 Product Description 3M™ Fire Barrier Sealant FD 150+ is an economical, ready to use, gun-grade, elastomeric sealant that dries to form a monolithic flexible firestop seal. 3M™ Fire Barrier Sealant FD 150+ firestops joints and through penetrations through floor
Quad, 14-Bit, 80 MSPS/105 MSPS/125 MSPS Serial LVDS 1.8 V ...
www.analog.comTechnical Support www.analog.com FEATURES 1.8 V supply operation Low power: 110 mW per channel at 125 MSPS with scalable power options ... AD9253 Data Sheet Rev. C | Page 4 of 40 . AC SPECIFICATIONS AVDD = 1.8 V, DRVDD = 1.8 V, 2 V p-p differential input, 1.0 V internal reference, AIN = −1.0 dBFS, unless otherwise noted. ...
UltraPly™ Bonding Adhesive - firestonebpco.com
www.firestonebpco.comPage 1 of 3 Description: ... Please contact Firestone Technical Services Department at 1-800-428-4511 for further information. This sheet is meant to highlight Firestone products and specifications and is subject to change without notice. Firestone takes responsibility for
Technical Data Sheet - Jotun
www.jotun.comPeak temperature duration max. 1 hour. Date of issue:22 March 2021 Page: 3/5 This Technical Data Sheet supersedes those previously issued. The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the Application Guide (AG) for this product.
PIC10(L)F320/322 Data Sheet
www.farnell.comJan 13, 2014 · DS40001585D-page 6 2011-2015 Microchip Technology Inc. 1.0 DEVICE OVERVIEW The PIC10(L)F320/322 are described within this data sheet. They are available in 6/8-pin packages. Figure 1-1 shows a block diagram of the PIC10(L)F320/322 devices. Table 1-2 shows the pinout descriptions. Reference Table 1-1 for peripherals available per device.
1.6 GHz Clock Distribution IC, Dividers, Delay Adjust, Two ...
www.analog.comAD9515 Data Sheet Rev. B | Page 4 of 28 TIMING CHARACTERISTICS CLK input slew rate = 1 V/ns or greater. Table 3. Parameter Min Typ Max Unit Test Conditions/Comments LVPECL Termination = 50 Ω to V S − 2 V Output Rise Time, t RP 60 100 ps 20% to 80%, measured differentially Output Fall Time, t ...