Threads Swagelok
Found 5 free book(s)
Weld Fittings, Ultrahigh-Purity, Specially ... - Swagelok
www.swagelok.comSwagelok ® Orbital Welding ... Pipe threads are based on the requirements of ASME B1 .2 .0 .1 (NPT) and SAE AS71051 (ANPT) for tapered pipe threads . Weld Fittings—Ultrahigh-Purity, Specially Cleaned, and Industrial 3 WELD FITTINGS
FITTING ASSEMBLY GUIDELINES - stoneagetools.com
www.stoneagetools.comStoneAge proprietary threads (G9, G12, G16, K) seal with the use of an O-Ring on the male thread and a flat face at the bottom of the female thread, they do not seal on the threads. A paste type anti-seize compound such as Swagelok Blue Goop ® works most effectively with these StoneAge propriety threads. • Use anti-seize compound on male thread.
High-Flow, Springless Diaphragm Valves - Swagelok
www.swagelok.comNo springs or threads in wetted areas improves cleanliness. Fully swept flow path enhances purging and gas replacement. gas adsorption and desorption. Fully contained seat insert increases cycle life. High-flow Swagelok ® “H” Type VCR fittings, Swagelok VCR fittings, and tube butt weld end connections are available.
Swagelok Tube Fitting Catalog - Trionics
trionics.comSwagelok ® gap inspection ... Straight Threads and O-Seal Pipe Threads) and Fluorocarbon FKM (ISO/BSP Parallel Threads and SAE/MS Straight Threads), 54 Tools and Accessories Hydraulic Swaging Units, 55 Preswaging Tools, 57 Wrenches, 58 Gap Inspection
Tube Fitting Catalog
www.tubefiteng.comFor female & male pipe threads to have the same pressure rating in the same nominal pipe size, the female thread would require a heavier wall, resulting in a fitting too large & bulky to be practical. Allowable stress of 20,000 psi (137,800 kPa) between -20 F & 100 F(-29 Cand 37 C) based on ultimate tensile strength 75,000 psi (516,700kPa).