Typical Installations
Found 4 free book(s)
CHAPTER 4 GAS PIPING INSTALLATIONS
ecodes.bizmeter installations shall be marked with an approved perma-nent identification by the installer so that the piping system supplied by each meter is readily identifiable. 401.8 Minimum sizes. All pipe utilized for the installation, extension and alteration of any piping system shall be sized to
Product Catalog - Aircraft Spruce
www.aircraftspruce.comOct 15, 2018 · Consult the Airframe maintenance manual, parts catalog, or equipment list (for optional installations), to confirm the approved part number for a particular application. It is the responsibility of the installer to assure that only approved parts have been used. Prior to installing replacement parts, please verify that the
4: Drainage (Below Ground Stormwater)
www.vba.vic.gov.auHousing installations are “Deemed to Satisfy” documents listed in Part B3 of the PCA and both contain sections on “Surface and Roof Drainage Systems - design”. The Plumbing Regulations 2008 also specify that roofing (stormwater) work must comply with SAA/SNZ HB114 Guidelines for the design of eaves and box gutters.
Advisory - Federal Aviation Administration
www.faa.govDate: 3/3/08 Initiated by: AFS-300 AC No: 43.13-2B . 1. PURPOSE. This advisory circular (AC) contains methods, techniques, and practices acceptable to the Administrator for the inspection and alteration on non-pressurized areas of civil