1 2 SIMATIC HMI 3 4 Operator Panel OP 170B 5 6 7 …

1 preface , ContentsIntroduction1 Functionality2 Commissioning 3 Operation4TP 170A Screen Objects5TP 170B and OP 170B Screen Objects6TP 170B and OP 170B Recipes7 System Settings8 Installation9 Dimensions10TP 170B and OP 170 BMemory Cards11 Maintenance/Upkeep12 Operating System Update13 AppendicesADGlossary, IndexRelease 12/01A5E00136801 Order No.: 6AV6591-1DC11-2AB0 Touch Panel TP 170A, TP 170 BOperator Panel OP 170 BEquipment ManualSIMATIC HMI!Dangerindicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.!Warningindicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

2 !Cautionused with the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result inminor or moderate without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, mayresult in property that unwanted events or status can occur if the relevant information is not your attention to particularly important information on the product, handling the product, or to a particularpart of the PersonnelEquipment may be commissioned and operated only by qualified personnel. Qualified personnel within themeaning of the safety notices in this manual are persons who are authorized to commission, ground and iden-tify equipment, systems and circuits in accordance with safety engeneering UsagePlease note the following:!

3 WarningThe device may only be used for the application cases specified in the catalog and the technical descriptionand may only be used in combination with third-party equipment and components recommended or approvedby must not take place until it is established that the machine which is to accommodate this component isconforms with the guideline 98/37 transport, and appropriate storage, installation and assembly, as well as careful operation andmaintenance, are required to ensure that the product operates perfectly and GuidelinesThis manual contains notices which you should observe to ensure your own personal safety, as well as toprotect the product and connected equipment.

4 These notices are marked as follows according to the levelof danger:TrademarksThe registered trademarks of the Siemens AG can be found in the preface . The remaining trademarks in thispublication may be trademarks, whose use by third parties for their own purposes could violate the rights of and Publisher: A&D PT1 D1We have checked the content of this publication for compliance with thedescribed hardware and software. However, discrepancies cannot be exclu-ded, with the result that we cannot guarantee total compliance. The informa-tion in this publication is, however, checked regularly, and any necessarycorrections are included in the following editions.

5 We welcome any suggesti-ons for of LiabilityCopyright Siemens AG 2001 All rights reservedThe transmission and reproduction of this documentation and the exploitationand communication of its contents are not permitted without expressauthority. Offenders will be liable for compensation for damage. All rightsreserved, especially in the case of the granting of a patent or registration of autility model or designSiemens AGAutomation & DrivesSIMATIC Human Machine InterfacePostfach 4848, D-90327 N rnbergE Siemens AG 2001 Technical data subject to AktiengesellschaftOrder no.

6 6AV6591-1DC11-2AB0 For your notesiTouch Panel TP 170A, TP 170B, Operator Panel OP 170B Equipment Manual6AV6591-1DC11-2AB0 PrefaceThis manualThe TP 170A, TP 170B, OP 170B equipment manual is part of the SIMATIC HMIdocumentation. It provides operation, installation, configuration and maintenancepersonnel with information concerning installation, functionality, operation andtechnical design of the SIMATIC operating units TP 170A, TP 170B and OP of the manualThe manual is organized into the following chapters:ChapterContents1 - 2 Overview of the features and functional scope of the unit3 - 6 Commissioning and operation7TP 170B and OP 170B recipes8 System settings9 - 12 Mechanical and electrical installation, unit description, retrofitting ofoptions as well as maintenance and on updating the operating systemAppendixSTechnical DataSInterface AssignmentsSHMI System MessagesSESD GuidelinesPrefaceRelease 12/01iiTouch Panel TP 170A, TP 170B, Operator Panel OP 170B Equipment Manual6AV6591-1DC11-2AB0 ConventionsThe following conventions are used throughout this manual.

7 Motor offText in the operating unit display is presented in thistypewriter names representing tag values on the screen arepresented in this italic typewriter available for selection are presented in this names of keys and buttons are displayed in a various releases of this manual correspond to the following versions of theProTool CS configuration software:EditionCommentProTool Version12/99 First release of the TP 170A equipmentmanualFrom to the TP 170B and OP 170 BdevicesFrom + SP212/01 New ProTool software, more screen objectsFrom V 12/01iiiTouch Panel TP 170A, TP 170B, Operator Panel OP 170B Equipment Manual6AV6591-1DC11-2AB0 TrademarksThe following names are registered trademarks of the Siemens AG.

8 SHMI SMP 270 SMP 270B SMP 370 SProAgent SProTool SProTool/Lite SProTool/Pro SSIMATIC SSIMATIC HMI SSIMATIC Multi Panel SSIMATIC Multifunctional Platform SWinCC SWinCC Add-on PrefaceRelease 12/01ivTouch Panel TP 170A, TP 170B, Operator Panel OP 170B Equipment Manual6AV6591-1DC11-2AB0 Other supportIn case of technical queries, please contact the Siemens representatives in thesubsidiaries and branches responsible for your and Technical SupportAvailable round the clock, worldwide:Johnson CityNurembergSingaporeSIMATIC HotlineWorldwide (Nuremberg)Technical Support(FreeContact)Local time: 7:00 to 17:00 Telephone:+49 (180) 5050-222 Fax:+49 (180) (Nuremberg)Technical Support (fee-based, only with SIMATICCard)Local time: 0:00 to 24:00 Telephone:+49 (911) 895-7777 Fax:+49 (911) 895-7001 GMT:+01:00 Europe / Africa (Nuremberg)AuthorizationLocal time: 7:00 to 17:00 Telephone:+49 (911) 895-7200 Fax:+49 (911) (Johnson City)Technical Support andAuthorizationLocal time: 8:00 to 19:00 Telephone: +1 423 461-2522 Fax:+1 423 5.

9 00 Asia / Australia (Singapore)Technical Support andAuthorizationLocal time: 8:30 to 17:30 Telephone:+65 740-7000 Fax:+65 languages spoken by the SIMATIC Hotlines are generally German and English, the Authorization Hotline is alsoprovided in French, Italian and 12/01vTouch Panel TP 170A, TP 170B, Operator Panel OP 170B Equipment Manual6AV6591-1DC11-2AB0 SIMATIC Customer Support Online ServicesThe SIMATIC Customer Support provides you with additional information aboutSIMATIC products through online services:SGeneral current information can be obtained in the Internet under product information and downloads which you may find useful areavailable: in the Internet under cs and via the Bulletin Board System (BBS) in Nuremberg ( SIMATIC CustomerSupport Mailbox) under the number +49 (911) 895-7100To dial the mailbox, use a modem with a capacity up to ( kBaud)whose parameters are set as follows: 8, N, 1, ANSI, or dial via ISDN ( , 64 kBit).

10 SYour contact partner for Automation & Drives can be found in the contactpartner database in the Internet abbreviations used in this manual have the following meaning:AG (PLC)Programmable Logic ControllerANSIA merican National Standards InstituteAS 511 Protocol of the PU interface to SIMATIC S5 ASCIIA merican Standard Code for Information InterchangeEMEvent MessageCCFLCold Cathode Fluorescence LampCFCompact FlashCPUC entral Processing UnitCSVC omma Separated ValuesDPDecentralized PeripheryDRAMD ynamic Random Access MemoryDSNData Source NameESDE lectrostatically Sensitive DeviceEMCE lectromagnetic CompatibilityHMIH uman Machine InterfaceIFInterfacePrefaceRelease 12/01viTouch Panel TP 170A, TP 170B.