10 mm - Amisco

1 All the 10 mm pilot valves feature: heat resistant bobbin moulded with 30% glass filled polyetylene terephtalate (PET) class H 180 C copper wire according to IEC 60317-51 encapsulation with high quality specially designed glass filled polypropylene homopolymer plunger and core made by a magnetic stainless steel specially designed for solenoid pilot assembly is designed for more than 50 million valve is normally equipped with HNBR seals and monostable manual coil is designed and manufactured according to EN and VDE 0580 and it s suitable for industrial ambient pilot is designed only for low voltage DC the components used

2 Are coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category the pneumatic connections are located in the valve body and the Amisco 10 mm pilot valve is suitable for the use of subbases or the assembling in batteries, for common pressure and exhaust location. More technical specifications are reported in the following mmPilot Valve1 The 10 mm pilot valve has been designed and developped by Amisco as a further evolution of the traditional product range manufactured for the pneumatic automation 10mm solenoid valve is designed for those applications, where high performances in terms of pressure and flow are specified, together with very low power consumption and miniaturized reliability even at high cycling rates is granted in any case.

3 This system is designed for use with solenoid valve is composed by an encapsulated coil joined to a plastic valve body made by PBT. The assembly is not DATAP ilot Valve technical dataValve functionMediaLubrificationOrifice sizePressureFlow rate @ 6 bar and p = 1 barKv flow factorResponse timeMax cycling timeLife time expectancyManual overrideAssemblyFixing3/2 NCair following ISO 8573-1 class 3-4-3not necessary0,8 mm0 8 bar13NL/min (port1 to port2)0,2010 ms2400 cpm50 milion cyclesmonostablein any positionn 2 screws M1,6 x 14 Tmax = 0,5Nm MaterialsValve bodySealsCoresSpringsCoilCopper wirePBT (Polybutylene terephthalate)

4 HNBR (other materials on request)stainless steelstainless steelPET (polyetylene terephthalate)class H 180 C IEC 60317-51 Coil technical dataDuty CycleTemperaturePowerVoltageVoltage variationInsulation ClassDegrees of protectionElectrical connectionCoil constructionED 100%ambient -5 C to + 50 Cfluid -5 C to + 50 C1W12-24V DC (other voltages on request) 10%FIP 40 (according to EN 60529)connectoraccording to EN and VDE 05802 All given information are subjected to changes without mm PILOT VALVE axial connection3 PORT 1 PORT 3 PORT 213210 mm PILOT VALVE perpendicular connection4 PORT 1 PORT 3 PORT 2132 MARKINGA lternative possibilities forCUSTOMER LOGO5 VALVE BODYCOILPLUNGERELECTRICAL 510 mm PILOT VALVE CODING SPECIFICATIONS electrical connectorP/N 540471 ASSEMBLING EQUIPMENTS - to be ordered separatelyMARKINGAM = Amisco logo and technical specificationsXX = according to customer demandZN = no

5 MarkingCODE:10 ZZAAKBYWC**PRODUCT FAMILY10 = 10 mm pilot valveVALVE TYPESB = 3/2 NC mmSEAL MATERIALSH = HNBRMANUAL OVERRIDEM = monostable (no lock) brassNOMINAL VOLTAGEC1 = 12 VDCC2 = 24 VDCO ther voltages available on demand6 WINDING CONFIGURATIONB = WOther winding configurations available on demandASSEMBLING COIL-VALVE1 = pneumatic and electrical ports on the opposite sideELECTRICAL CONNECTIONP1 = Perpendicular with connectorP2 = Perpendicular without connectorA1 = Axial with connectorA2 = Axial without connectorTel.

6 +39 +39 3/2014 Amisco Piaggio, 7020037 Paderno Dugnano (Mi)