Example: barber

10. Standards for materials used in plumbing systems

HEALTH ASPECTS OF PLUMBING464710. Standards for materials used in plumbing StandardsStandards are sets of rules that outline specification of dimensions, design of operation, materials and performance, or describe quality of materials , products or systems . These Standards should cover the performance expectations of the product for particular applications, as well as, in the case of drinking-water con-tact, the chemicals that may be leached from the product into the water. The intent of Standards is to provide at least minimum quality, safety or performance specifications so as to ensure relatively uniform products and performance, and to remove ambiguity as to the suitability of certain commercial products for par-ticular applications. They reduce the risk of error by installers, and also provide assurance to the plumbing system owners. Standards also provide direction to manufacturers in respect to the expectations of the products that they produce.

mercial product (not just the class of product) has been evaluated by a credible independent third-party testing or certifying organization that is in no way related to or a part of the manufacturer or seller, and which has a system for policing the validity of its certifications.

Tags:

  Miracle

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of 10. Standards for materials used in plumbing systems

1 HEALTH ASPECTS OF PLUMBING464710. Standards for materials used in plumbing StandardsStandards are sets of rules that outline specification of dimensions, design of operation, materials and performance, or describe quality of materials , products or systems . These Standards should cover the performance expectations of the product for particular applications, as well as, in the case of drinking-water con-tact, the chemicals that may be leached from the product into the water. The intent of Standards is to provide at least minimum quality, safety or performance specifications so as to ensure relatively uniform products and performance, and to remove ambiguity as to the suitability of certain commercial products for par-ticular applications. They reduce the risk of error by installers, and also provide assurance to the plumbing system owners. Standards also provide direction to manufacturers in respect to the expectations of the products that they produce.

2 Internationally accepted Standards provide economies to both the manufacturer and the user by reducing the number of products of the same type that must be produced. Standards may be developed by industry, non-profit organizations or trade associations, as well as national or international bodies. The existence of credible Standards and certifiers relieves the regulatory authority of the need to develop its own case-by-case Standards and product assessment existence of a standard does not always ensure that all available products meet a specific standard. In order to be confident of uniformity in a product there must be checks and balances. This is accomplished by assessment conform-ity. Assessment conformity, product listing and certification all have the same meaning. Simply stated, it means that a product, material or device has been tested and verified to meet the specification that has been developed. There are at least three types of certification: where the manufacturer or seller self-certifies and guarantees the product by warranty or contract; where the manufacturer or seller obtains verification by a contract laboratory; or where the specific com-mercial product (not just the class of product) has been evaluated by a credible independent third-party testing or certifying organization that is in no way related to or a part of the manufacturer or seller, and which has a system for policing the validity of its conformity, by any name, means that a product, service, material, system, device or component has undergone testing to ensure it meets the HEALTH ASPECTS OF PLUMBING4647intended standard for such product, material, system, device or component.

3 There are several organizations that perform assessment conformity and, in most cases, if a specific product, material, system, device or component meets a designated standard, the testing organization may allow placement of a mark or logo of the organization on the product, material, system, device or component to certify that the relevant standard was successfully Products and materials used in Standards for plumbing products and materialsThe durability of a plumbing system is dependent on the quality of its compo-nent parts and the assembly skills of those who install it. No plumbing system, however well designed, can be expected to operate safely or hygienically if the products or materials used are unsatisfactory. The inverse is also true if the best-quality products or materials are used but are installed incorrectly, the system will be a industrialized countries have national Standards or codes that set out the minimum requirements for the material specifications, design and use of specific plumbing products.

4 However, plumbing codes of practice vary considerably according to the extent to which they specify the detailed Standards for plumb-ing products and other matters. Some countries take the view that the level of detail should be minimized, whereas others are very prescriptive. However, even prescriptive codes should allow for the introduction and innovative use of prom-ising new products, materials and installation practices without undue delay. Countries that are members of the International Organization for Standardization (ISO) may choose to adopt the ISO framework as a minimum standard set for plumbing products and materials . WHO Guidelines for Drinking-water Quality should be used as reference in decisions concerning health-related matters. Several national and international Standards and certifying organizations utilize and expand upon those basic principles by identifying specific products that comply. It is important to ensure that commonly used plumbing products and materials are of the same type, at least throughout a country, to take advantage of economies of scale in manufacturing and to ensure easy process of certification of quality of plumbing products may necessitate the setting up of testing establishments where products can be assessed.

5 In many cases it will be more economical to simply adopt an existing qualified Standards and certification programme that already has international acceptance. This will also avoid unnecessary proliferation of Standards . Product certifiers and their testing facilities must be of the highest standard and subject to external application of suitable materials and products must be supported by adequate levels of training of plumbers who use them so that they can identify and use only appropriate products. 10. Standards FOR materials USED IN plumbing SYSTEMSHEALTH ASPECTS OF Selecting suitable products Numerous Standards and certification bodies exist nationally and internation-ally, so it may not be necessary for a country to develop a unique set of Standards . It could decide to adopt one of the existing systems and require that products are certified to meet that system s requirements. In judging a product or material, the regulating authority (or certifier) must consider factors such as the following: Is the product or material under consideration suitable for the application or purpose?

6 Will it be harmful to the health of the community in its normal use? Is there a risk of these materials being released into the environment ( the water) in the first instance or after the working life of the product or material has expired? All pipes, valves, taps and other fittings used for the supply of drinking-water or the removal of wastewater must not contain harmful substances above the speci-fied amount that could leach into the water. Lead, cadmium and arsenic are examples of many possible contaminants that could be present. The pipes, valves, taps and other fittings must be capable of conveying water at a nominated pressure within a prescribed environment, and must be of sufficient strength to contain anticipated internal pressures. They must also be able to withstand external pressures if they are to be buried. The impact of environmental factors such as heat, cold, expansion, contraction, corrosion, pH and bacteria levels also need to be and many national authorities have developed guidelines or Standards that set out the maximum acceptable levels of metals and chemicals and other contaminants in public drinking-water supplies (WHO 2004a).

7 These are then converted to apply to contaminants that may leach from the fixtures and the associated network of piping systems . For example, a pipe standard might require that the leaching level of a heavy metal must not exceed 10% of the drinking-water standard based upon a standard test that simulates use and expo-sure conditions. Some authorities also insist that piping systems for soil and waste-water drainage systems comply with the same material criteria. Manufac-turers in these areas are obliged to comply or risk losing market share or perhaps face prosecution. The Standards set for materials in contact with drinking-water are minimum requirements and are based upon a specified use condition range; for example, a product suitable for a cold water system will, in most cases, not be acceptable for a hot water system. It is common for piping and construction materials , as well as the water being conveyed, to be seriously affected by aggres-sive environments and local conditions.

8 In summary, it is still very much in the hands of the individual project adviser or installer to ensure that the plumbing products and materials selected for the application are in accordance with official HEALTH ASPECTS OF PLUMBING4849requirements, will not be unduly affected or influenced by local factors and are correct for the well as deciding what is an acceptable plumbing product or material, the water authority or governing organization must set Standards for the level of training attained by the installation personnel, a point that cannot be over-emphasized. In some countries, for reasons of economy, transport, proximity to manufacturing plants or restricted access to international markets, the choice of available materials for plumbing products and piping systems is often limited. Socioeconomic reasons may also dictate the quality and standard of plumbing in domestic Metallic and non-metallic materials used in pipeworkThere are two families of materials available for water pipework systems : metal-lic and non-metallic materials .

9 Of these the most commonly used materials for drinking-water supply piping are galvanized steel or iron, copper, polybutylene, unplasticized polyvinylchloride (PVC), chlorinated polyvinylchloride (CPVC) and polyethylene (PE). Metal alloys, which far exceed the performance specifica-tions of their respective parent materials , are also widely used. New materials and construction technologies are continually being developed for the building industry and the plumbing industry. Without some form of control at the respective levels within the plumbing and building industries it would be easy for unscru-pulous manufacturers to use inferior materials to the detriment of installers and end-users. This can ultimately damage the environment and the health of the community and lead to greater costs later when systems fail Galvanized steel or iron Galvanized steel or iron was the traditional piping material in the plumbing industry for the conveyance of water and wastewater.

10 The term galvanizing once referred to hot dipped galvanizing, in other words total immersion in molten zinc after pretreatment cleaning. This technology afforded a reasonable level of internal and external protection to the metal pipe. In more recent times, the use of electroplating technologies has provided a more attractive external finish, but little or no internal protection. Although still included in many codes of practice throughout the world, the popularity of galvanized piping is declining. It is still being used extensively in the fire protection industry, but overall there are increasing limitations on how and where galvanized piping may be used. Internal and external corrosion is a particular problem where galvanized steel or iron piping is connected to dissimilar materials , such as copper alloy (brass) in taps and valves. Internal corrosion can add iron, which causes an undesirable taste and may also cause unsightly precipitation of iron salts on clothes.